3Com Switch 2824 (CBlUG24)- 24 x 1Gigabit Ethernet
24 autosensing 10/100/1000 Ethernet Standards conformance: ISO 8802-3, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.1d (bridging), IEEE 802.3x (flow control), IEEE 802.3ab (Gigabit Ethernet) Media interfaces: 10/100/1000BASE-TX/RJ-45 Switching features: Store-and-forward; full-/half-duplex auto-negotiation; Class-of-Service (CoS) 802.1p traffic prioritization (priority queuing) MAC addresses: 32,000 LED indicators: Power, network traffic/duplex mode, link status/speed Electrical power: Power inlet: IEC 320 AC line frequency: 50/60 Hz Input voltage: 100-240 VAC Current rating: 1A, max Maximum power consumption: 21W Maximum power
3Com Switch 3CR 17333A-91 (4210) – 26 x Fast Ethernet +2 SFP
The 3Com 3CR17333-91 Switch 4210 is a Layer 2 entry-level 10/100 LAN switch with enterprise-class Qu’s, security and management features, delivering high value for network administrators looking for an economical edge device that provides simple port expansion
3COM Switch (2924-SFP Plus) -24 x Gigabit Ethernet 4 Gigabit SFP ports
Twenty-four 10/100/1000 ports and 4 Gigabit SFP ports, dual-purposed with 4 of the 10/100/1000 ports (configurable as 10/100/1000 or SFP); front-panel console port for CLI management
Auto-voice VLAN automatically assigns Voice over IP (VoIP) traffic to a voice-dedicated VLAN, optimizing this delay-sensitive traffic
VLANs segment the network by grouping users based on their data or traffic requirements, making the best use of available bandwidth
IEEE 802.1X network access control provides standards-based security combined with local authentication
HPE OfficeConnect 1920s Series (JL381A) Switch – 24 Gigabit Ports – 2*1Gb SFP– Layer 2
- The HP OfficeConnect 1920S Series (JL381A) is a smart-managed Layer 2 switch designed for small and medium-sized businesses.
- The JL381A switch is designed to deliver wire-speed gigabit Ethernet connectivity with up to 80 Gbps switching capacity and up to 59.5 Mpps throughput.
- The switch supports both web-based and command-line interface (CLI) management, as well as SNMP, RMON, and LLDP protocols for network monitoring and control.
- The switch provides advanced security features such as Access Control Lists (ACLs), 802.1X port authentication, and MAC-based authentication to protect the network from unauthorized access and attacks.
TP-Link (TL-SG1024D) Switch – 24 Gigabit Ethernet Ports, Layer 2,Plug & Play
- 24 Gigabit Ethernet Ports.
- Supports MAC address auto-learning and auto-aging
- 8K MAC address table, 12.8 Gbps switching capacity.
- 13-inch steel case, suitable for rack-mounting or desktop installation.
- Plug and play design simplifies installation.
- Fanless design ensures quiet operation.
TP-Link (TL-SG1024) Switch – 24 Gigabit Ethernet Ports, Unmanaged, Layer 2
- The TL-SG1024 Gigabit Ethernet Switch provides you with a high-performance, low-cost, Easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network.
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Innovative energy-efficient technology saves power consumption
- Supports MAC address self-learning and auto MDI/MDIX
HP V1910-24G POE (JE007A) Switch – 24 Gigabit Ethernet Ports – 4 SFP – Layer 3 Static Routing
- The HP V1910-24G switch is a powerful networking device that offers 24 Gigabit Ethernet ports for fast and reliable connectivity.
- The switch also supports Layer 3 static routing, which allows you to route traffic between different networks and subnets.
- Web-based management and a command-line interface (CLI) make it easy to configure and manage the switch.
- With support for VLANs, LACP, and STP, this switch provides advanced networking features to help you manage your network more efficiently.
Cisco Catalyst 2970G-24T-E – 24 Gigabit Ethernet Ports- 4 * 1 GB SFP – Managed
- The Catalyst 2970 features robust security features, including port security, Access Control Lists (ACLs), and support for 802.1X authentication.
- It supports advanced Quality of Service (QoS) features to prioritize and manage network traffic based on application and user needs
- The switch supports multiple VLANs, enabling network administrators to segment traffic by department, function, or application.
HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
HPE OfficeConnect 1920 series (JG927a) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
HPE OfficeConnect 1920 series (JG924a) Switch – 24 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Aruba 2920-24G (J9726A) – 20x 1GbE Ports – 4x 1Gb SFP Combo Ports – Stacking – L3 – GUI Management
- The Aruba 2920 Switch Series provides security, scalability, and ease of use for enterprise edge, SMB and branch office networks.
- A powerful ProVision ASIC delivers low latency, more packet buffering, and adaptive power consumption
- Aruba Layer 3 switch series with stacking, static & RIP routing, IPv6, ACLs, and sFlow.
- Advanced security and network management tools with Aruba ClearPass Policy Manager and Aruba AirWave
- Software-defined Network (SDN) Ready with OpenFlow support
- Layer 4 prioritization Class of Service (CoS)