الـسـويـتـشـات

الـسـويـتـشـات
Show:
Out Of Stock

Cisco (SG300-10MPP) – 12 Port (10* 1G (RJ45) , 2*1G SFP[combo]) (PoE+) Ports – Layer 3 Static Routing, Managed Switch

(0)
Highlight
  • Cisco (SG300-10MPP) switch can provide up to 62W of PoE+ power to connected devices, such as IP phones, wireless access points, and IP cameras.
  • The switch can perform basic Layer 3 routing tasks, allowing it to connect multiple VLANs and route traffic between them.
  • The switch supports QoS features such as prioritization and rate limiting, which can help ensure that critical applications have the bandwidth they need.
  • The switch can handle up to 10 Gbps of traffic, making it suitable for small and medium-sized networks.
  • Web-based management: The switch can be configured and managed using a web-based interface, which makes it easy to set up and maintain

Lenovo RackSwitch G8272 – 48x10Gb (SFP/SFP+) Ports – 6x40Gb(QSFP+) Ports – Layer 3 – Managed – Dual Power supply – Rear-to-Front Airflow

(0)
Highlight
  • The Enterprise NOS (ENOS) has a feature-rich design with virtualization, high availability, and enterprise class Layer 2 and Layer 3 functionality.
  • It supports  Network virtualization VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.
  • Advanced Layer 2/3/4 switching and routing capabilities, including Virtual Router Redundancy Protocol (VRRP), Border Gateway Protocol (BGP), and Equal-Cost Multipath (ECMP)
  • The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
  • Support for OpenFlow 1.3 and 1.4 for software-defined networking (SDN) applications
  • Hot-swappable power supplies and fan modules for high availability and easy maintenance

Lenovo RackSwitch NE10032 – 32 Ports of 40GbE or 100GbE ( QSFP+/QSFP28) – Layer 3 – Managed

(0)
Highlight
  • Cloud and virtualization solutions with VM-aware network automation and integration into Lenovo and third-party IT and cloud infrastructure management tools
  • The 10 Gb/25 Gb/40 Gb/100 Gb Ethernet NE10032 RackSwitch provides a combination of low latency, non-blocking line-rate switching, and ease of management with 6.4 Tbps throughput.
  • The NE10032 RackSwitch includes Layer 3 functionality, which provides security and performance benefits, as inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers
  • The NE10032 switch supports VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.

Lenovo RackSwitch G8332 – 32 * 40 Gigabit (QSFP+), 2.56 Tbps throughput, Full-featured L2 and L3, Managed

(0)
Highlight
  • Lenovo RackSwitch G8332 is a 1U rack-mountable aggregation switch used for combining traffic from multiple high-speed server racks. It has 32 QSFP+ ports, 
  • Ultra-low latency and 2.56 Tbps throughput. It is an enterprise-class, full-featured L2 and L3 data center switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data.
  • It supports 10 Gigabit Ethernet, 40 Gigabit Ethernet, Converged Enhanced Ethernet (CEE/DCB), and iSCSI configurations. 
  • The switch uses a wire-speed, non-blocking switching fabric that provides simultaneous wire-speed transport of multiple packets at low latency on all ports. 
  • The switch has exceptional port density and flexibility with break-out cables, and can support up to 96x 10 Gigabit Ethernet connections and still have 8x 40 Gigabit Ethernet uplinks.
Out Of Stock

IBM 2498-24E 8Gb 24-Port Fibre Channel FC SAN Switch

(0)
Highlight
  • IBM System Storage SAN24B-4 Express , 8 Gbps SAN switches is designed to provide high-performance switching platforms used to interconnect storage devices and servers in storage area networks (SANs).
  • Auto-sensing FC ports supporting 1, 2, 4, and 8 Gbps
  • It can also be used to address the SAN requirements of a small- to medium-sized workgroup

TP-Link (TL-SG1024D) Switch – 24 Gigabit Ethernet Ports, Layer 2,Plug & Play

(0)
Highlight
  • 24 Gigabit Ethernet Ports.
  • Supports MAC address auto-learning and auto-aging
  • 8K MAC address table, 12.8 Gbps switching capacity.
  • 13-inch steel case, suitable for rack-mounting or desktop installation.
  • Plug and play design simplifies installation.
  • Fanless design ensures quiet operation.

TP-Link (TL-SG1016 PE) Switch – 16 Gigabit Ethernet Ports , 8 Port (PoE+), Layer 2

(0)
Highlight
  • The TP-Link (TL-SG1016 PE) switch provides 16 Gigabit Ethernet ports, with PoE+ support on 8 of its ports.
  • The PoE+ ports can provide up to 30 watts of power each, which is sufficient for most PoE-enabled devices.
  • The switch supports VLANs, LACP, and STP, providing advanced networking features for network aggregation, improved performance, and loop prevention.
  • The switch’s Energy-efficient Ethernet (EEE) compliance helps to reduce power consumption and operating costs.

TP-Link (TL-SG1024) Switch – 24 Gigabit Ethernet Ports, Unmanaged, Layer 2

(0)
Highlight
  • The TL-SG1024 Gigabit Ethernet Switch provides you with a high-performance, low-cost, Easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network. 
  • All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
  • Innovative energy-efficient technology saves power consumption
  • Supports MAC address self-learning and auto MDI/MDIX

HP V1910-24G POE (JE007A) Switch – 24 Gigabit Ethernet Ports – 4 SFP – Layer 3 Static Routing

(0)
Highlight
  • The HP V1910-24G switch is a powerful networking device that offers 24 Gigabit Ethernet ports for fast and reliable connectivity.
  • The switch also supports Layer 3 static routing, which allows you to route traffic between different networks and subnets.
  • Web-based management and a command-line interface (CLI) make it easy to configure and manage the switch.
  • With support for VLANs, LACP, and STP, this switch provides advanced networking features to help you manage your network more efficiently.

Cisco Catalyst 2970G-24T-E – 24 Gigabit Ethernet Ports- 4 * 1 GB SFP – Managed

(0)
Highlight
  • The Catalyst 2970 features robust security features, including port security, Access Control Lists (ACLs), and support for 802.1X authentication.
  • It supports advanced Quality of Service (QoS) features to prioritize and manage network traffic based on application and user needs
  • The switch supports multiple VLANs, enabling network administrators to segment traffic by department, function, or application.

Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed

(0)
Highlight
  • The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
  • The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
  • Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
  • Advanced features such as QoS, ACLs, IPv6 support, and more
  • Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
  • Easy management with web-based GUI and CLI interfaces

HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing

(0)
Highlight
  • Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
  • The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
  • Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
  • All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
  • Layer 3 static routing with 32 routes for network segmentation and expansion
Scroll To Top
Close
Close

Shopping Cart

Close

Shopping cart is empty!

Continue Shopping

Sidebar
arAR
×
Verified by MonsterInsights