Layer Supported | L2 |
Form Factor | Rack-mountable |
Manageable | YES |
Network Technology | 10/100/1000Base-T |
Port/Expansion Slot Details | Gigabit Ethernet |
Total Number of Network Ports | 24*1Gb |
Uplink | 4*1GB SFP |
Brand Name | Cisco |
Product Name | Cisco Catalyst 2970G-24TS-E |
Manufacturer Part Number | Cisco Catalyst 2970G-24TS-E |
Product Series | Catalyst 2970 |
Product Model | Cisco Catalyst 2970G-24TS-E |
Forwarding bandwidth | 28 Gbps |
Flash | 16 MB |
No.of MAC | 8192 MAC addresses |
Media Type Supported | Twisted Pair |
Twisted Pair Cable Standard | CAT 5, CAT 6 |
Ethernet Technology | Gigabit Ethernet |
Width | 44.5 cm |
Weight | 12.5 lb (5.68 kg) |
Height | 6.59 cm |
Depth | 29.5 cm |
System Requirements | UTP Category 5 cables or better, Network card for each PC or server |
Input Voltage | 110 V AC, 220 V AC |
Cisco Catalyst 2970G-24T-E – 24 Gigabit Ethernet Ports- 4 * 1 GB SFP – Managed
EGP5,399
- The Catalyst 2970 features robust security features, including port security, Access Control Lists (ACLs), and support for 802.1X authentication.
- It supports advanced Quality of Service (QoS) features to prioritize and manage network traffic based on application and user needs
- The switch supports multiple VLANs, enabling network administrators to segment traffic by department, function, or application.
Only logged in customers who have purchased this product may leave a review.
Related products
HP J8693A Procurve 3500yl-48G-PWR Switch: 48 Gigabit Ports, 1U, PoE, L3/L4
HP J8693A Procurve 3500yl-48G-PWR switch is a 48-port Gigabit Ethernet switch with Power over Ethernet (PoE) capabilities, housed in a 1U form factor. It is a layer 3 (L3) and layer 4 (L4) switch, offering advanced routing and network management capabilities.
- 48 Gigabit Ethernet ports
- Power over Ethernet (PoE) capability
- 1U form factor for efficient use of rack space
- L3/L4 switching for advanced routing and network management
- Support for layer 3 static and RIP routing, and layer 4 access control lists (ACLs)
- Support for VLANs, QoS, and Link Aggregation Control Protocol (LACP)
- IPv6 support for future-proofing your network.
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
Tripp Lite Auto-Transfer Switch PDU
Tripp Lite’s Auto-Transfer Switch PDU (Power Distribution Unit) automatically switches to a secondary power source in the event of a primary power failure. This ensures continuous, uninterruptible power to connected equipment and can help prevent data loss and equipment damage. This PDU can be used in a variety of settings, including data centers, server rooms, and network closets.
HPE OfficeConnect 1920 series (JG927a) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
HP 850 Unified Wired-WLAN Appliance, L2/L3/L4 Managed, 8*1GbE (RJ-45)-8*1GbE (SFP)-2*10GB SFP+
- Scalable capacity, performance, and high reliability for medium Enterprise wireless networks
- System-wide approach to WLAN reliability through Wi-Fi Clear Connect
- The HPE 850 Unified Wired-WLAN Appliance provides eight 1000 Mbps Ethernet ports and two 10GbE ports
- Flexible forwarding modes
- Comprehensive feature set for demanding Enterprise environments
CISCO N5K-C5548UP-FA – Nexus 5548 UP
Cisco Nexus 5548UP. Switch type: Managed, Switch layer: L2/L3. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000), Basic switching RJ-45 Ethernet ports quantity: 32, Console port: RJ-45. MAC address table: 32000 entries. Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w,…. Rack mounting, Form factor: 1U
Peplink Balance 380 Multi-WAN Router
- Up to 7 advanced load balancing for faster, more responsive networking
- Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
- Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
- IPsec/L2TP/PPTP VPN Functionality
- Advanced QoS Functionality
- IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
Netgear M4300-28G – PoE+ – 24x1G, 2x10G BASE-T, 2xSFP+, Stackable, Layer 3 Managed Switches
- Expand your small to medium-sized business’s network capacity with the M4300-28G PoE+ 26-Port 1G/10G PoE+ Compliant Managed Network Switch from Netgear.
- This fully managed rackmount network switch includes Layer 2, 3, and 4 feature sets
- With 24 PoE+ you can provide power and data to IP cameras, access points, VoIP phones, and more.
- The M4300-28G-PoE+ provides 24 Gigabit PoE+ ports with 2 10GBASE-T and 2 10GBASE-X SFP+ uplink connectivity
- The (MM4300-28G) -PoE+ is designed to smoothly transfer data with a 128 Gb/s switching capacity and 95.2 Mpps forwarding rate.
- Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection.
HP A5120 EI Switch Series (JG245A), Layer 3, Managed Gigabit Ethernet switch with 24 10/100/1000 BaseT ports (NEW)
- Provides Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.
- Offers high scalability with two expansion slots that can support two-port 10GbE expansion modules.
- Features Unique Intelligent Resilient Framework (IRF) technology for creating virtual fabrics by virtualizing multiple switches into a single logical device.
- Provides high availability, simplified management, and comprehensive security
HPE FlexNetwork 5130 JH325A – L3 – Managed – 24 Ports PoE+ 4x 10G SFP+
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports
- Fixed 10GbE ports for high-speed stacking or uplinks
- Provide higher efficiency in IP phone, wireless access point
- Support for multiple services
- Comprehensive security control policies
- Diversified quality of service (QoS) policies
- Excellent manageability
Buffalo Business Switch ,16-port ,UnManaged ,Layer 2 Gigabit Switch
Buffalo’s unmanaged business-class 16-port gigabit switch offers a quick and easy way to extend your office network at fast gigabit Ethernet speeds.
– Fast and Easy Setup: Auto-MDIX provides fast plug and play setup with any Ethernet cable
– Forwarding Method is Store & Forward
– 1000Base-T/100BASE-TX/10BASE-T Auto-negotiation 16 ports
– Loop detection (buzzer and LED notification)
– Auto-Negotiation & Auto MDIX – simply plug in, no settings needed
– Full/Half-duplex auto-detect 1000/100/10Mbps – Silent and reliable fanless design
Reviews
There are no reviews yet.