Only logged in customers who have purchased this product may leave a review.
Cisco catalyst WS-X4748-UPOE+E line-card
EGP5,999
In Stock
Highlight
قـارن- Designed to power next-generation IP phones, wireless base stations, video cameras, virtual desktop clients, and other POE/UPOE devices
- Line-Card Type:- Cisco Catalyst 4500E Series (4503-E /4506-E/4507R-E/4507R+E4510R-E/
4510R+E) - Ports :- 48 * 10/100/1000 Gigabit UPOE ports module (RJ-45)
- UPOE capable of up to 60 W per port up to 1440 W
Related products
ARUBA 7030 MOBILITY CONTROLLERS-8 Ports Combo (RJ-45&SFP) – 4096 Concurrent (Users/Devices) – Managed-1 U Rack-Mountable
تم التقييم 0 من 5
(0)
Highlight
- Branch and Remote Networking Requirements
- Zero-touch provisioning with limited IT assistance
- Secure access to corporate resources across the hybrid WAN
- Wireless and wired access for employees and guests
- WAN optimization and availability
- Policy-based routing and management
- Unified architecture across all locations
HP 5500 series Switch (JG542A) -POE+ – L3-Managed – 48*1GB Ethernet Ports-4*1GB SFP 2*10GB SFP+ – Dual Power Supply
تم التقييم 0 من 5
(0)
Highlight
- The HP 5500 series switch delivers unrivaled resiliency, security, and multi-service capabilities at the edge of branch and large campus networks
- 48 auto-sensing GigabitEthernet PoE+ ports
- 4 fixed GbE SFP ports, 2* 10GbE SFP+ ports
- 1 GB SDRAM, Packet buffer capacity: 6 MB and 512 MB flash
- 224 Gb/s routing/switching performance
- Stacking capability – IRF, 9 switches
HPE OfficeConnect 1920 series (JG927a) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
تم التقييم 0 من 5
(0)
Highlight
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Juniper EX4200 Series 48Port POE L3/L4 Managed Switch
تم التقييم 0 من 5
(0)
Highlight
– 48*1Gbps include 8 ports power over Ethernet
– (2-port *10GbE SFP / 2-port *1GbE SFP) Uplink Module
– Supported web GUI management
– Dual Power supply
EGP7,499
Cisco Catalyst 3650 Switch – 24*1GB Ports – 4*1GB SFP Uplinks – L3 – Managed- Stackable Switch
تم التقييم 0 من 5
(0)
Highlight
- The Cisco Catalyst 3650 Series Switch, with Cisco StackWise-160 Technology, can stack 9 switches and support up to 160 Gpbs stack bandwidth.
- The Cisco 3650 Catalyst Switch is the next generation of enterprise-class standalone and stackable (optional) access-layer switches that provide the foundation for full convergence between wired and wireless on a single platform.
- The Cisco Catalyst 3650 is built on the advanced Cisco StackWise-160, and takes advantage of the new Cisco Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC).
- This Cisco 3650 Catalyst switch can enable uniform wired-wireless policy enforcement.
EGP6,000
HP StorageWorks 8/20q Fibre Channel Switch-20*8Gb FC-1 U- (AK241)
تم التقييم 0 من 5
(0)
Highlight
- 20 x 8Gb Fibre Channel Ports
- Hot-swappable 8 Gbps SFP optical transceivers
- Non-Disruptive Code Load and Activation (NDCLA)
- Drag-and-drop zoning
- Adaptive trunking, intelligent path selection
- It allows the user to view two saved configurations and compare the differences
- Transparent Routing (TR) technology – Seamless operation: HP B and C-series SANs
- Integrated end-to-end management-server to storage
EGP6,499
CISCO N5K-C5548UP-FA – Nexus 5548 UP
تم التقييم 0 من 5
(0)
Highlight
Cisco Nexus 5548UP. Switch type: Managed, Switch layer: L2/L3. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000), Basic switching RJ-45 Ethernet ports quantity: 32, Console port: RJ-45. MAC address table: 32000 entries. Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w,…. Rack mounting, Form factor: 1U
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
تم التقييم 0 من 5
(0)
Highlight
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
EGP34,999
Peplink Balance 380 Multi-WAN Router
تم التقييم 0 من 5
(0)
Highlight
- Up to 7 advanced load balancing for faster, more responsive networking
- Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
- Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
- IPsec/L2TP/PPTP VPN Functionality
- Advanced QoS Functionality
- IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices
EGP2,499 EGP4,999
الـسـويـتـشـات, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE
HPE OfficeConnect 1920 series (JG924a) Switch – 24 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
تم التقييم 0 من 5
(0)
Highlight
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
EGP2,999
Nexus (2232TM-E) Fabric Extender -10GBASE-T, 32x (1/10) GEBase-T + 8x10GE Module (SFP+), 2PS, 1 Fan Module, Cisco Parent Switches Cisco Nexus (5000, 6000, 7000, or n9000) Series
تم التقييم 0 من 5
(0)
Highlight
- Reduces data center cabling costs and footprint with optimized inter-rack cabling
- Unified fabric and FCoE at the server access layer reduce capital expenditure and operating expenses
- Virtual Port Channel (vPC) and in-service software upgrades (ISSU) Increase resilience
- Virtual machine aware network services facilitate quick expansion of network capacity
EGP12,499
HP J8693A Procurve 3500yl-48G-PWR Switch: 48 Gigabit Ports, 1U, PoE, L3/L4
تم التقييم 0 من 5
(0)
Highlight
HP J8693A Procurve 3500yl-48G-PWR switch is a 48-port Gigabit Ethernet switch with Power over Ethernet (PoE) capabilities, housed in a 1U form factor. It is a layer 3 (L3) and layer 4 (L4) switch, offering advanced routing and network management capabilities.
- 48 Gigabit Ethernet ports
- Power over Ethernet (PoE) capability
- 1U form factor for efficient use of rack space
- L3/L4 switching for advanced routing and network management
- Support for layer 3 static and RIP routing, and layer 4 access control lists (ACLs)
- Support for VLANs, QoS, and Link Aggregation Control Protocol (LACP)
- IPv6 support for future-proofing your network.
AR 
EN 
Reviews
There are no reviews yet.