Only logged in customers who have purchased this product may leave a review.
Dell Switch (5424) -24 x 1 Gigabit Ethernet
- 24 10/100/1000BASE-T auto-sensing Gigabit Ethernet switching ports
- 4 SFP combo slots for fiber media support (Note: SFP slots are used instead of the built-in 10/100/1000BaseT ports)
- Auto-negotiation for speed, duplex mode and flow control
- Auto MDI/MDIX Port mirroring Broadcast storm control
- Switch Fabric Capacity 48.0 Gbps
- Forwarding Rate 35.6 Mpps
- Up to 8,000 MAC Addresses
Related products
CISCO N5K-C5548UP-FA – Nexus 5548 UP
Cisco Nexus 5548UP. Switch type: Managed, Switch layer: L2/L3. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000), Basic switching RJ-45 Ethernet ports quantity: 32, Console port: RJ-45. MAC address table: 32000 entries. Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w,…. Rack mounting, Form factor: 1U
Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply
- The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .
- It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.
- The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.
- The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.
- The switch also includes replaceable dual power supply units and a fan tray module.
Tripp Lite Auto-Transfer Switch PDU
Tripp Lite’s Auto-Transfer Switch PDU (Power Distribution Unit) automatically switches to a secondary power source in the event of a primary power failure. This ensures continuous, uninterruptible power to connected equipment and can help prevent data loss and equipment damage. This PDU can be used in a variety of settings, including data centers, server rooms, and network closets.
Peplink Balance 380 Multi-WAN Router
- Up to 7 advanced load balancing for faster, more responsive networking
- Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
- Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
- IPsec/L2TP/PPTP VPN Functionality
- Advanced QoS Functionality
- IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
Cisco Catalyst 2970G-24T-E – 24 Gigabit Ethernet Ports- 4 * 1 GB SFP – Managed
- The Catalyst 2970 features robust security features, including port security, Access Control Lists (ACLs), and support for 802.1X authentication.
- It supports advanced Quality of Service (QoS) features to prioritize and manage network traffic based on application and user needs
- The switch supports multiple VLANs, enabling network administrators to segment traffic by department, function, or application.
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
Nexus (2232TM-E) Fabric Extender -10GBASE-T, 32x (1/10) GEBase-T + 8x10GE Module (SFP+), 2PS, 1 Fan Module, Cisco Parent Switches Cisco Nexus (5000, 6000, 7000, or n9000) Series
- Reduces data center cabling costs and footprint with optimized inter-rack cabling
- Unified fabric and FCoE at the server access layer reduce capital expenditure and operating expenses
- Virtual Port Channel (vPC) and in-service software upgrades (ISSU) Increase resilience
- Virtual machine aware network services facilitate quick expansion of network capacity
HP V1910-24G POE (JE007A) Switch – 24 Gigabit Ethernet Ports – 4 SFP – Layer 3 Static Routing
- The HP V1910-24G switch is a powerful networking device that offers 24 Gigabit Ethernet ports for fast and reliable connectivity.
- The switch also supports Layer 3 static routing, which allows you to route traffic between different networks and subnets.
- Web-based management and a command-line interface (CLI) make it easy to configure and manage the switch.
- With support for VLANs, LACP, and STP, this switch provides advanced networking features to help you manage your network more efficiently.
HP 850 Unified Wired-WLAN Appliance, L2/L3/L4 Managed, 8*1GbE (RJ-45)-8*1GbE (SFP)-2*10GB SFP+
- Scalable capacity, performance, and high reliability for medium Enterprise wireless networks
- System-wide approach to WLAN reliability through Wi-Fi Clear Connect
- The HPE 850 Unified Wired-WLAN Appliance provides eight 1000 Mbps Ethernet ports and two 10GbE ports
- Flexible forwarding modes
- Comprehensive feature set for demanding Enterprise environments
Aruba 2920-24G (J9726A) – 20x 1GbE Ports – 4x 1Gb SFP Combo Ports – Stacking – L3 – GUI Management
- The Aruba 2920 Switch Series provides security, scalability, and ease of use for enterprise edge, SMB and branch office networks.
- A powerful ProVision ASIC delivers low latency, more packet buffering, and adaptive power consumption
- Aruba Layer 3 switch series with stacking, static & RIP routing, IPv6, ACLs, and sFlow.
- Advanced security and network management tools with Aruba ClearPass Policy Manager and Aruba AirWave
- Software-defined Network (SDN) Ready with OpenFlow support
- Layer 4 prioritization Class of Service (CoS)
HP A5120 EI Switch Series (JG245A), Layer 3, Managed Gigabit Ethernet switch with 24 10/100/1000 BaseT ports (NEW)
- Provides Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.
- Offers high scalability with two expansion slots that can support two-port 10GbE expansion modules.
- Features Unique Intelligent Resilient Framework (IRF) technology for creating virtual fabrics by virtualizing multiple switches into a single logical device.
- Provides high availability, simplified management, and comprehensive security
Reviews
There are no reviews yet.