– 24 Fibre Channel universal ports with 1, 2, and 4 Gbit/s full duplex. 8 port base and expandable in 8 port increments.
– Full line-speed switching and auto-sensing of 1, 2, 4, and 8 Gbps port speeds
– Enhanced Transmission Selection
– ISL Trunking up to eight 8Gb/s ports per ISL Trunk, for a single Trunk up to 68 Gb/s (8 ports x 8.5 Gb/s).
– Fibre Channel media type: Hot-plug, standard Small Form Factor Pluggable (SFP) and SFP+, LC connector
– 1 USB port for firmware, supportSave, and config backup and restore
DS-300B: Brocade – EMC 8/24-port 8 Gbit/sec SAN switch + 8 Gbic 8G Free
EGP12,499
Only logged in customers who have purchased this product may leave a review.
Related products
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
Aruba 2920-24G (J9726A) – 20x 1GbE Ports – 4x 1Gb SFP Combo Ports – Stacking – L3 – GUI Management
- The Aruba 2920 Switch Series provides security, scalability, and ease of use for enterprise edge, SMB and branch office networks.
- A powerful ProVision ASIC delivers low latency, more packet buffering, and adaptive power consumption
- Aruba Layer 3 switch series with stacking, static & RIP routing, IPv6, ACLs, and sFlow.
- Advanced security and network management tools with Aruba ClearPass Policy Manager and Aruba AirWave
- Software-defined Network (SDN) Ready with OpenFlow support
- Layer 4 prioritization Class of Service (CoS)
Nexus 2232PP Fabric Extender – 32x (1/10) GE (SFP/SFP+) + 8x10GE (SFP+) Module, 2PS, 1 Fan Module, Cisco parent switches Cisco Nexus (5000, 6000, 7000, or n9000) Series
- Reduces data center cabling costs and footprint with optimized inter-rack cabling
- Unified fabric and FCoE at the server access layer reduce capital expenditure and operating expenses
- Virtual Port Channel (vPC) and in-service software upgrades (ISSU) Increase resilience
- Virtual machine aware network services facilitate quick expansion of network capacity
Tripp Lite Auto-Transfer Switch PDU
Tripp Lite’s Auto-Transfer Switch PDU (Power Distribution Unit) automatically switches to a secondary power source in the event of a primary power failure. This ensures continuous, uninterruptible power to connected equipment and can help prevent data loss and equipment damage. This PDU can be used in a variety of settings, including data centers, server rooms, and network closets.
HPE OfficeConnect 1920 series (JG927a) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
HPE OfficeConnect 1920 series (JG924a) Switch – 24 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Cisco Catalyst 2970G-24T-E – 24 Gigabit Ethernet Ports- 4 * 1 GB SFP – Managed
- The Catalyst 2970 features robust security features, including port security, Access Control Lists (ACLs), and support for 802.1X authentication.
- It supports advanced Quality of Service (QoS) features to prioritize and manage network traffic based on application and user needs
- The switch supports multiple VLANs, enabling network administrators to segment traffic by department, function, or application.
ARUBA 7030 MOBILITY CONTROLLERS-8 Ports Combo (RJ-45&SFP) – 4096 Concurrent (Users/Devices) – Managed-1 U Rack-Mountable
- Branch and Remote Networking Requirements
- Zero-touch provisioning with limited IT assistance
- Secure access to corporate resources across the hybrid WAN
- Wireless and wired access for employees and guests
- WAN optimization and availability
- Policy-based routing and management
- Unified architecture across all locations
Aruba S2500 Mobility Access Switch-24P-4x10G SFP+ POE
The S2500 Mobility Access Switch from Aruba Networks® extends role-based user access, security and operational simplicity to wired networks.
A vital part of Aruba Mobility-Defined NetworksTM, the S2500 delivers secure, virtualized access services to users, regardless of their location, access method, device or applications
Juniper EX4200 Series 48Port POE L3/L4 Managed Switch
HP 5500 series Switch (JG542A) -POE+ – L3-Managed – 48*1GB Ethernet Ports-4*1GB SFP 2*10GB SFP+ – Dual Power Supply
- The HP 5500 series switch delivers unrivaled resiliency, security, and multi-service capabilities at the edge of branch and large campus networks
- 48 auto-sensing GigabitEthernet PoE+ ports
- 4 fixed GbE SFP ports, 2* 10GbE SFP+ ports
- 1 GB SDRAM, Packet buffer capacity: 6 MB and 512 MB flash
- 224 Gb/s routing/switching performance
- Stacking capability – IRF, 9 switches
Peplink Balance 380 Multi-WAN Router
- Up to 7 advanced load balancing for faster, more responsive networking
- Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
- Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
- IPsec/L2TP/PPTP VPN Functionality
- Advanced QoS Functionality
- IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices
Reviews
There are no reviews yet.