Only logged in customers who have purchased this product may leave a review.
FORTINET FORTIGATE 300C & Cisco Catalyst 3650 48P 1G POE+
EGP12,500
FORTINET FORTIGATE 300C
___________________
Cisco Catalyst 3650 48P 1G POE+
-48Port 1G PoE+
-Uplink 1G
-Layer 3 Switch
-Power Supply 1025W
-Web interface
-With Rackmounts
_________________
4 GBICS 1G SINGLE MODE
Related products
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
ARUBA 7030 MOBILITY CONTROLLERS-8 Ports Combo (RJ-45&SFP) – 4096 Concurrent (Users/Devices) – Managed-1 U Rack-Mountable
- Branch and Remote Networking Requirements
- Zero-touch provisioning with limited IT assistance
- Secure access to corporate resources across the hybrid WAN
- Wireless and wired access for employees and guests
- WAN optimization and availability
- Policy-based routing and management
- Unified architecture across all locations
HP J8693A Procurve 3500yl-48G-PWR Switch: 48 Gigabit Ports, 1U, PoE, L3/L4
HP J8693A Procurve 3500yl-48G-PWR switch is a 48-port Gigabit Ethernet switch with Power over Ethernet (PoE) capabilities, housed in a 1U form factor. It is a layer 3 (L3) and layer 4 (L4) switch, offering advanced routing and network management capabilities.
- 48 Gigabit Ethernet ports
- Power over Ethernet (PoE) capability
- 1U form factor for efficient use of rack space
- L3/L4 switching for advanced routing and network management
- Support for layer 3 static and RIP routing, and layer 4 access control lists (ACLs)
- Support for VLANs, QoS, and Link Aggregation Control Protocol (LACP)
- IPv6 support for future-proofing your network.
Tripp Lite Auto-Transfer Switch PDU
Tripp Lite’s Auto-Transfer Switch PDU (Power Distribution Unit) automatically switches to a secondary power source in the event of a primary power failure. This ensures continuous, uninterruptible power to connected equipment and can help prevent data loss and equipment damage. This PDU can be used in a variety of settings, including data centers, server rooms, and network closets.
HPE OfficeConnect 1920 series (JG924a) Switch – 24 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Nexus 2232PP Fabric Extender – 32x (1/10) GE (SFP/SFP+) + 8x10GE (SFP+) Module, 2PS, 1 Fan Module, Cisco parent switches Cisco Nexus (5000, 6000, 7000, or n9000) Series
- Reduces data center cabling costs and footprint with optimized inter-rack cabling
- Unified fabric and FCoE at the server access layer reduce capital expenditure and operating expenses
- Virtual Port Channel (vPC) and in-service software upgrades (ISSU) Increase resilience
- Virtual machine aware network services facilitate quick expansion of network capacity
Juniper EX4200 Series 48Port POE L3/L4 Managed Switch
TP-Link (TL-SG1024) Switch – 24 Gigabit Ethernet Ports, Unmanaged, Layer 2
- The TL-SG1024 Gigabit Ethernet Switch provides you with a high-performance, low-cost, Easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network.
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Innovative energy-efficient technology saves power consumption
- Supports MAC address self-learning and auto MDI/MDIX
Netgear M4300-28G – PoE+ – 24x1G, 2x10G BASE-T, 2xSFP+, Stackable, Layer 3 Managed Switches
- Expand your small to medium-sized business’s network capacity with the M4300-28G PoE+ 26-Port 1G/10G PoE+ Compliant Managed Network Switch from Netgear.
- This fully managed rackmount network switch includes Layer 2, 3, and 4 feature sets
- With 24 PoE+ you can provide power and data to IP cameras, access points, VoIP phones, and more.
- The M4300-28G-PoE+ provides 24 Gigabit PoE+ ports with 2 10GBASE-T and 2 10GBASE-X SFP+ uplink connectivity
- The (MM4300-28G) -PoE+ is designed to smoothly transfer data with a 128 Gb/s switching capacity and 95.2 Mpps forwarding rate.
- Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection.
Peplink Balance 380 Multi-WAN Router
- Up to 7 advanced load balancing for faster, more responsive networking
- Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
- Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
- IPsec/L2TP/PPTP VPN Functionality
- Advanced QoS Functionality
- IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices
HPE FlexNetwork 5130 JH325A – L3 – Managed – 24 Ports PoE+ 4x 10G SFP+
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports
- Fixed 10GbE ports for high-speed stacking or uplinks
- Provide higher efficiency in IP phone, wireless access point
- Support for multiple services
- Comprehensive security control policies
- Diversified quality of service (QoS) policies
- Excellent manageability
Nexus (2232TM-E) Fabric Extender -10GBASE-T, 32x (1/10) GEBase-T + 8x10GE Module (SFP+), 2PS, 1 Fan Module, Cisco Parent Switches Cisco Nexus (5000, 6000, 7000, or n9000) Series
- Reduces data center cabling costs and footprint with optimized inter-rack cabling
- Unified fabric and FCoE at the server access layer reduce capital expenditure and operating expenses
- Virtual Port Channel (vPC) and in-service software upgrades (ISSU) Increase resilience
- Virtual machine aware network services facilitate quick expansion of network capacity
Recently Viewed
HPE APOLLO 4200 GEN9 SERVER ( 24-Bay LFF + 6-Bay SFF )
📌HPE APOLLO 4200 GEN9 SERVER ( 24-Bay LFF + 6-Bay SFF )
🔹CPU : DUAL INTEL XEON E5-2697 V4 – Total 90MB Cashe / Total 72 Core Therads
🔹Memory: 32GB DDR4 ECC ( UP TO 2TB RAM )
RAID CONTROLLER P840AR 4G + BATTERY
🔹STORAGE : 2*256G SSD 3 Years Warranty ( New in Box ) + 10*2TB SAS Enterprise ( Total 20TB SAS )
🔺Full Caddy 24 Caddy
Supports SAS/SATA/SSD/SSD SAS/ SSD SAS Flash/nvme HOT-PLUG LFF SAS/ UP TO 448 TB🔥
🔹NETWORK : DUAL 10Base-T/100Base-TX/1000Base-TX + QUAD PORT 1GB RJ45 PCI ( OPTIONAL )
🔹iLO 4 MANAGEMENT TOOL WITH REMOTE CONSOL
🔹DUAL USB 3.0 CONNECTORS
🔹Dual PCIe3 x16 ( 16, 8, 4, 1 ) + TRIPLE PCIe3 x 8 ( 8, 4, 1 )
🔹DUAL POWER SUPPLY 1400 WATT
🥇1 Year Warranty 🥇
O-Net 3M 100G QSFP 28 AOC Optical Cable
Data Rate: 100Gbps
Connector Type: QSFP28 AOC
Cable Length: 3M
HPE SYNERGY 12000 FRAME
HPE SYNERGY 12000 FRAME
* 6 ZONES FOR COMPUTE AND STORAGE , UP TO 12 HALF-HEIGHT OR 6 FULL-HEIGHT COMPUTE MODULES,
* 6 INTERCONNECT MODULE BAYS (3+3 REDUNDANCY) UP TO 40GB PER PORT
* 2 APPLIANCE BAYS FOR MANAGEMENT
* 10 FAN BAYS
* FRONT PANEL, FOR SYNERGY CONSOLE CONNECTIONS
* 6 POWER SUPPLIES BAYS (N+N, N+1 REDUNDANCY)
* HPE SYNERGY MANAGEMENT THAT MAXIMIZES POWER AND COOLING EFFICIENCY.
THE INCLUSER INCLUDE 12 COMPUTE MODULES,
HPE SYNERGY 480 GEN10 COMPUTE MODULE
1. UP TO TWO (2) INTEL®️ XEON®️ SCALABLE FAMILY PROCESSORS
UP TO 28 CORE PER PROCESSOR
2. TWENTY-FOUR (24) DDR4 DIMM MEMORY SLOTS (12 PER PROCESSOR)
3. REMOVABLE DRIVE CAGE WITH TWO HOT-PLUG DRIVE BAYS
( SAS/SATA/SSD SAS/SSD SATA 12BGB )
4.HPE SMART ARRAY P204I-C SR GEN10 CONTROLLER
5. SMART ARRAY BATTERY CONNECTION
6. REMOVABLE DRIVE CAGE WITH 2 HOT-PLUG DRIVE BAYS AND
CONNECTION POINT FOR M.2 DRIVE ADAPTOR KIT
7. MEZZANINE CONNECTORS (3 X16 PCIE 3.0)
8. COMPUTE MODULE POWER AND MANAGEMENT CONNECTOR
9. USB 3.0 MULTIPORT SUPPORT
10. ILO CHIPSET (UNDER DRIVE CAGE)
11. MICROSD SLOT (UNDER DRIVE CAGE)
——————————————
12*HPE SYNERGY 480 GEN10
24*INTEL XEON PLATINUM 8160 (2 FOR EACH NODE)
12*RAM 32GB DDR4 ECC (32GB FOR EACH NODE)
Reviews
There are no reviews yet.