Only logged in customers who have purchased this product may leave a review.
HPE 5130-24G-SFP-4SFP+ (JG933A) With 28 Gbic
EGP25,000
📌HPE 5130-24G-SFP-4SFP+ (JG933A)
*24 port SFP 1G
*8 port RJ45 1 G
*4 Port SFP+ 10G
*Dual Power supply
🔺4 Gbic 10G Multi Mode
🔺12 Gbic 1G Single Mode
🔺12 Gbic 1G Multi Mode
Related products
CISCO N5K-C5548UP-FA – Nexus 5548 UP
Cisco Nexus 5548UP. Switch type: Managed, Switch layer: L2/L3. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000), Basic switching RJ-45 Ethernet ports quantity: 32, Console port: RJ-45. MAC address table: 32000 entries. Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w,…. Rack mounting, Form factor: 1U
ARUBA 7030 MOBILITY CONTROLLERS-8 Ports Combo (RJ-45&SFP) – 4096 Concurrent (Users/Devices) – Managed-1 U Rack-Mountable
- Branch and Remote Networking Requirements
- Zero-touch provisioning with limited IT assistance
- Secure access to corporate resources across the hybrid WAN
- Wireless and wired access for employees and guests
- WAN optimization and availability
- Policy-based routing and management
- Unified architecture across all locations
HP V1910-24G POE (JE007A) Switch – 24 Gigabit Ethernet Ports – 4 SFP – Layer 3 Static Routing
- The HP V1910-24G switch is a powerful networking device that offers 24 Gigabit Ethernet ports for fast and reliable connectivity.
- The switch also supports Layer 3 static routing, which allows you to route traffic between different networks and subnets.
- Web-based management and a command-line interface (CLI) make it easy to configure and manage the switch.
- With support for VLANs, LACP, and STP, this switch provides advanced networking features to help you manage your network more efficiently.
HP J8693A Procurve 3500yl-48G-PWR Switch: 48 Gigabit Ports, 1U, PoE, L3/L4
HP J8693A Procurve 3500yl-48G-PWR switch is a 48-port Gigabit Ethernet switch with Power over Ethernet (PoE) capabilities, housed in a 1U form factor. It is a layer 3 (L3) and layer 4 (L4) switch, offering advanced routing and network management capabilities.
- 48 Gigabit Ethernet ports
- Power over Ethernet (PoE) capability
- 1U form factor for efficient use of rack space
- L3/L4 switching for advanced routing and network management
- Support for layer 3 static and RIP routing, and layer 4 access control lists (ACLs)
- Support for VLANs, QoS, and Link Aggregation Control Protocol (LACP)
- IPv6 support for future-proofing your network.
Cisco Catalyst 2970G-24T-E – 24 Gigabit Ethernet Ports- 4 * 1 GB SFP – Managed
- The Catalyst 2970 features robust security features, including port security, Access Control Lists (ACLs), and support for 802.1X authentication.
- It supports advanced Quality of Service (QoS) features to prioritize and manage network traffic based on application and user needs
- The switch supports multiple VLANs, enabling network administrators to segment traffic by department, function, or application.
NETGEAR ProSAFE JGS524 24-Port Gigabit Ethernet Unmanaged Switch with Auto-Uplink
- 10/100/1000Base-T gigabit technology for high-speed network connectivity
- Rackmountable design for easy installation in a server room or data center
- Plug and play functionality for easy setup and immediate use
- Auto Uplink™️ feature automatically detects and adjusts for straight-through or crossover cables
- Energy-saving auto power-down mode for ports not in use
- Compatible with a wide range of 10-, 100-, and 1000-Mbps devices for versatile network integration
- Compact size for desktop placement or standard 19-inch rack mounting.
Nexus 2232PP Fabric Extender – 32x (1/10) GE (SFP/SFP+) + 8x10GE (SFP+) Module, 2PS, 1 Fan Module, Cisco parent switches Cisco Nexus (5000, 6000, 7000, or n9000) Series
- Reduces data center cabling costs and footprint with optimized inter-rack cabling
- Unified fabric and FCoE at the server access layer reduce capital expenditure and operating expenses
- Virtual Port Channel (vPC) and in-service software upgrades (ISSU) Increase resilience
- Virtual machine aware network services facilitate quick expansion of network capacity
Juniper EX4200 Series 48Port POE L3/L4 Managed Switch
Aruba 2920-24G (J9726A) – 20x 1GbE Ports – 4x 1Gb SFP Combo Ports – Stacking – L3 – GUI Management
- The Aruba 2920 Switch Series provides security, scalability, and ease of use for enterprise edge, SMB and branch office networks.
- A powerful ProVision ASIC delivers low latency, more packet buffering, and adaptive power consumption
- Aruba Layer 3 switch series with stacking, static & RIP routing, IPv6, ACLs, and sFlow.
- Advanced security and network management tools with Aruba ClearPass Policy Manager and Aruba AirWave
- Software-defined Network (SDN) Ready with OpenFlow support
- Layer 4 prioritization Class of Service (CoS)
HP 850 Unified Wired-WLAN Appliance, L2/L3/L4 Managed, 8*1GbE (RJ-45)-8*1GbE (SFP)-2*10GB SFP+
- Scalable capacity, performance, and high reliability for medium Enterprise wireless networks
- System-wide approach to WLAN reliability through Wi-Fi Clear Connect
- The HPE 850 Unified Wired-WLAN Appliance provides eight 1000 Mbps Ethernet ports and two 10GbE ports
- Flexible forwarding modes
- Comprehensive feature set for demanding Enterprise environments
Peplink Balance 380 Multi-WAN Router
- Up to 7 advanced load balancing for faster, more responsive networking
- Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
- Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
- IPsec/L2TP/PPTP VPN Functionality
- Advanced QoS Functionality
- IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices
Aruba S2500 Mobility Access Switch-24P-4x10G SFP+ POE
The S2500 Mobility Access Switch from Aruba Networks® extends role-based user access, security and operational simplicity to wired networks.
A vital part of Aruba Mobility-Defined NetworksTM, the S2500 delivers secure, virtualized access services to users, regardless of their location, access method, device or applications
Recently Viewed
HPE 5130-24G-SFP-4SFP+ (JG933A) With 28 Gbic
📌HPE 5130-24G-SFP-4SFP+ (JG933A)
*24 port SFP 1G
*8 port RJ45 1 G
*4 Port SFP+ 10G
*Dual Power supply
🔺4 Gbic 10G Multi Mode
🔺12 Gbic 1G Single Mode
🔺12 Gbic 1G Multi Mode
HPE 5130-24G-SFP-4SFP+ (JG933A) & SWITCHES JUNIPER – EX3300 48port POE+
📌HPE 5130-24G-SFP-4SFP+ (JG933A)
*24 port SFP 1G
*8 port RJ45 1 G
*4 Port SFP+ 10G
*Dual Power supply
WITH RACKMOUNTS
📌SWITCHES JUNIPER – EX3300 48port POE+
48 port 1G POE+
Uplink 1G
Layer 3 Switch
WITH RACKMOUNTS
لو انت عميل العالمية هتبدل ب
EX3300 48port POE+ 4port SFP+ 10G 🔥
HP ProLiant DL580 G9 High Performance Rack Server
CPU : Quad Intel Xeon E7-8867 V3 / Max Turbo Frequency (3.30 GHz)
Total Cores 64/Total Therads 128/Total Cache 180MB
Memory : 128 GB DDR4 -ECC ( 2666V )
Storage : 5*600GB SSD ( Intel pro Enterprise )
RAID CONTROLLER : HPE Smart Array P830i / FBWC Controller
NETWORK : 4 * 1 GB RJ45
🥇1 Year Warranty 🥇
HP ProLiant DL580 G9 High Performance Rack Server
🔹CPU : 4x Intel Xeon E7-8880 v3 @ 2.30GHz
🔹TOTAL 72 CORE / 144 LOGICAL CORE / 180M CACHE
🔹RAM : 👉128G ( 4*32G ) DDR4 ECC UP TO 8 TB
🔹STORAGE : 5 * 1.8TB SAS Enterprise
🔹RAID CONTROLLER : HPE Smart Array P830i / 2G FBWC Controller
🔹NETWORK : 4 * 1 GB RJ45
🔹USB connections : 4 x USB2 REAR
2 x USB2 FRONT
2 x USB2 INTERNAL
🔹Management port : HPE iLO 4 On System Management Memory
🔹PCI slots : 9x PCIe3 x16
🔹VGA connections : 1 x D-Sub front
1 x D-Sub rear
🔹POWER SUPPLY : QUAD POWER SUPPLY 4*1200 WATT TURBO
Reviews
There are no reviews yet.