| Power Output | 2-2.4kW Single-Phase ATS/Switched PDU |
| Platform | LX Platform |
| Outlets | 200-240 V 10 C13 outlets, 2 C14 inlets, 3.6m cords, 1U rack mount design |
| Automatic Transfer Switching | Switches from primary to secondary power source in milliseconds |
| Remote Control and Monitoring | Switched C13 outlets are individually controllable for remote reboots and load shedding. Check essential functions at a glance |
| Part Number | PDUMH15HVATNET |
Tripp Lite Auto-Transfer Switch PDU
Tripp Lite’s Auto-Transfer Switch PDU (Power Distribution Unit) automatically switches to a secondary power source in the event of a primary power failure. This ensures continuous, uninterruptible power to connected equipment and can help prevent data loss and equipment damage. This PDU can be used in a variety of settings, including data centers, server rooms, and network closets.
Related products
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
TP-Link (TL-SG1016 PE) Switch – 16 Gigabit Ethernet Ports , 8 Port (PoE+), Layer 2
- The TP-Link (TL-SG1016 PE) switch provides 16 Gigabit Ethernet ports, with PoE+ support on 8 of its ports.
- The PoE+ ports can provide up to 30 watts of power each, which is sufficient for most PoE-enabled devices.
- The switch supports VLANs, LACP, and STP, providing advanced networking features for network aggregation, improved performance, and loop prevention.
- The switch’s Energy-efficient Ethernet (EEE) compliance helps to reduce power consumption and operating costs.
HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
NETGEAR ProSAFE JGS524 24-Port Gigabit Ethernet Unmanaged Switch with Auto-Uplink
- 10/100/1000Base-T gigabit technology for high-speed network connectivity
- Rackmountable design for easy installation in a server room or data center
- Plug and play functionality for easy setup and immediate use
- Auto Uplink™️ feature automatically detects and adjusts for straight-through or crossover cables
- Energy-saving auto power-down mode for ports not in use
- Compatible with a wide range of 10-, 100-, and 1000-Mbps devices for versatile network integration
- Compact size for desktop placement or standard 19-inch rack mounting.
Cisco Catalyst 2970G-24T-E – 24 Gigabit Ethernet Ports- 4 * 1 GB SFP – Managed
- The Catalyst 2970 features robust security features, including port security, Access Control Lists (ACLs), and support for 802.1X authentication.
- It supports advanced Quality of Service (QoS) features to prioritize and manage network traffic based on application and user needs
- The switch supports multiple VLANs, enabling network administrators to segment traffic by department, function, or application.
Peplink Balance 380 Multi-WAN Router
- Up to 7 advanced load balancing for faster, more responsive networking
- Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
- Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
- IPsec/L2TP/PPTP VPN Functionality
- Advanced QoS Functionality
- IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices
ARUBA 7030 MOBILITY CONTROLLERS-8 Ports Combo (RJ-45&SFP) – 4096 Concurrent (Users/Devices) – Managed-1 U Rack-Mountable
- Branch and Remote Networking Requirements
- Zero-touch provisioning with limited IT assistance
- Secure access to corporate resources across the hybrid WAN
- Wireless and wired access for employees and guests
- WAN optimization and availability
- Policy-based routing and management
- Unified architecture across all locations
HP A5120 EI Switch Series (JG245A), Layer 3, Managed Gigabit Ethernet switch with 24 10/100/1000 BaseT ports (NEW)
- Provides Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.
- Offers high scalability with two expansion slots that can support two-port 10GbE expansion modules.
- Features Unique Intelligent Resilient Framework (IRF) technology for creating virtual fabrics by virtualizing multiple switches into a single logical device.
- Provides high availability, simplified management, and comprehensive security
Buffalo Business Switch ,16-port ,UnManaged ,Layer 2 Gigabit Switch
Buffalo’s unmanaged business-class 16-port gigabit switch offers a quick and easy way to extend your office network at fast gigabit Ethernet speeds.
– Fast and Easy Setup: Auto-MDIX provides fast plug and play setup with any Ethernet cable
– Forwarding Method is Store & Forward
– 1000Base-T/100BASE-TX/10BASE-T Auto-negotiation 16 ports
– Loop detection (buzzer and LED notification)
– Auto-Negotiation & Auto MDIX – simply plug in, no settings needed
– Full/Half-duplex auto-detect 1000/100/10Mbps – Silent and reliable fanless design
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply
- The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .
- It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.
- The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.
- The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.
- The switch also includes replaceable dual power supply units and a fan tray module.
TP-Link (TL-SG1024) Switch – 24 Gigabit Ethernet Ports, Unmanaged, Layer 2
- The TL-SG1024 Gigabit Ethernet Switch provides you with a high-performance, low-cost, Easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network.
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Innovative energy-efficient technology saves power consumption
- Supports MAC address self-learning and auto MDI/MDIX
Recently Viewed
Cisco 3850 48Port 1G UPOE
📌Cisco 3850 48Port 1G UPOE
◾48Port 1G UPOE
◾Layer 3 Switch
◾Web interface
◾Stackable switch
◼️Power Supply 1100W 🔥
◾With Rackmount
Dell EMC PowerEdge R740 16Bay SFF
📌Dell EMC PowerEdge R740 16Bay SFF
▪️ Processor: Dual Intel®️ Xeon®️ GOLD 6230 (40 Cores / 80 Threads)
▪️ Memory: 32GB DDR4 ECC
▪️ Storage: 2 x 200GB SSD SAS FLASH + 5 x 900GB SAS ENTERPRISE 10K
▪️ RAID Controller: PERC H730P – 2G NVCache
▪️ Power Supply: Dual Hot-Plug 750WATT
▪️ Accessories: 2 Power Cable + Local RailKit + Face Mask
DELL EMC R740XD – 24-Bay SFF Rack Server
🔥 DELL EMC R740XD – 24-Bay SFF Rack Server 🔥
💻 Specifications:
▪️ Processor: Dual Intel® Xeon® Gold 6226 (24 Cores / 48 Threads)
▪️ Memory: 64GB DDR4 ECC (Expandable – ECC Supported)
▪️ Storage: 5 x 1.2TB SAS Enterprise HDD
▪️ RAID Controller: PERC H730 – Advanced Storage Management
▪️ Power Supply: Dual Hot-Plug Platinum 1100W PSU
▪️ Network: Integrated Daughter Card – 2 x 25GbE Ultra-Fast Connectivity
▪️ Front Ports: iDRAC Direct Micro-USB, 2 x USB 2.0, 1 x USB 3.0 (Optional), 1 x VGA
▪️ Rear Ports: iDRAC Dedicated Network, Serial, 2 x USB 3.0, 1 x VGA
💡 Perfect For:
✅ Virtualization Platforms (VMware, Hyper-V, Proxmox)
✅ Databases & ERP Systems (Oracle, SQL, SAP)
✅ High-Performance Computing & Enterprise Workloads
✅ File & Storage Servers
✅ Web Hosting & Application Servers
✅ AI, Machine Learning & Big Data Analytics
⚡ High Performance | Enterprise Reliability | Scalable Solution ⚡
Dell EMC PowerEdge R740 16 Bay SFF
📌Dell EMC PowerEdge R740 16 Bay SFF
▪️ Processor: Dual Intel®️ Xeon®️ GOLD 6254 (🚀🚀🚀)
▪️ Memory: 64GB DDR4 ECC (2933Y)
▪️ Storage: 6 x 900GB SAS ENTERPRISE 10K
▪️ RAID Controller: PERC H730P – 2G NVCache
▪️ Power Supply: Dual Hot-Plug 750WATT
▪️ Accessories: 2 Power Cable + Local RailKit + Face Mask
Dell PowerEdge R640 – 8-Bay SFF 2.5” Rack Server
🕹️ Dell PowerEdge R640 – 8-Bay SFF 2.5” Rack Server 🕹️
🔸 Processors: Dual Intel® Xeon® Gold 5118
⚡ Max Turbo Frequency: 3.20 GHz
🔸 Memory: 16GB DDR4 ECC
🔸 Storage: 3*512G SSD Brand New (New in Box)
🔸 Power Supply: Dual Hot-Plug Redundant 750W PSUs
🔸 Warranty: 1-Year Full Hardware Warranty (Including PSU)
Cisco Nexus 9372PX-E
Cisco Nexus 9372PX-E
48 Port SFP+ 10G
6 Port QSFP+
1YEAR WARRANTY
2 FORTINET FORTIGATE 60D ( POE ) WITH ORIGINAL ADAPTORS
QTY : 2
FORTINET FORTIGATE 60D ( POE )
WITH ORIGINAL ADAPTORS
Cisco Catalyst 3850 48P POE+ Uplink 10G Power Supply 1100W
Cisco Catalyst 3850 48P POE+ Uplink 10G Power Supply 1100W
◾48Port 1G PoE+
◾Uplink 10G
◾Layer 3 Switch
◾Web interface
◾ Power Supply 1100W
🔺With Rackmounts
🔺POWER CABLES ORIGINAL Cut Free
🔺4 GBICS Free (2*10G+2*1G)
◾ 1 Year Warranty




































