D-Link Switch (DGS-1210-48) – 48 x 1 Gigabit Ethernet
- The D-Link DGS-1210 Series Smart Managed Switches are the latest generation of switches to provide increased Power over Ethernet (PoE) output, a range of physical interface types, multiple management interfaces, and advanced Layer 2 features. With all of these features combined, the DGS-1210 Series provides a cost-efficient and flexible solution for expanding any business network.
- 48 x 10/100/1000BASE-T ports
- 4 x Gigabit GbE/SFP combo ports
- Advanced L2 switching and security features
- L2+ Static Routing
- Optional “standard mode” or “surveillance mode” management user interface
D-Link Switch (Des -1228P) 24-Port PoE 10/100 + (4) 1000BASE-T Ports + 2 Combo Ports
4 SFP (Fiber Module) Ports
Port Based and 802.1q VLAN
Auto-Negotiation, Auto-MDIX
Flow Control: Back pressure for Half-Duplex
802.3x Pause Frame for Full-Duplex
Switch Fabric: 48Gbps / non-blocking
Wire speed performance
Mac Address: 8 K MAC address table
Package buffer memory: 500K Bytes
Jumbo frame support to 9600 bytes
3Com Switch 2824 (CBlUG24)- 24 x 1Gigabit Ethernet
24 autosensing 10/100/1000 Ethernet Standards conformance: ISO 8802-3, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.1d (bridging), IEEE 802.3x (flow control), IEEE 802.3ab (Gigabit Ethernet) Media interfaces: 10/100/1000BASE-TX/RJ-45 Switching features: Store-and-forward; full-/half-duplex auto-negotiation; Class-of-Service (CoS) 802.1p traffic prioritization (priority queuing) MAC addresses: 32,000 LED indicators: Power, network traffic/duplex mode, link status/speed Electrical power: Power inlet: IEC 320 AC line frequency: 50/60 Hz Input voltage: 100-240 VAC Current rating: 1A, max Maximum power consumption: 21W Maximum power
3Com Switch 3CR 17333A-91 (4210) – 26 x Fast Ethernet +2 SFP
The 3Com 3CR17333-91 Switch 4210 is a Layer 2 entry-level 10/100 LAN switch with enterprise-class Qu’s, security and management features, delivering high value for network administrators looking for an economical edge device that provides simple port expansion
3COM Switch (2924-SFP Plus) -24 x Gigabit Ethernet 4 Gigabit SFP ports
Twenty-four 10/100/1000 ports and 4 Gigabit SFP ports, dual-purposed with 4 of the 10/100/1000 ports (configurable as 10/100/1000 or SFP); front-panel console port for CLI management
Auto-voice VLAN automatically assigns Voice over IP (VoIP) traffic to a voice-dedicated VLAN, optimizing this delay-sensitive traffic
VLANs segment the network by grouping users based on their data or traffic requirements, making the best use of available bandwidth
IEEE 802.1X network access control provides standards-based security combined with local authentication
HPE OfficeConnect 1920s Series (JL381A) Switch – 24 Gigabit Ports – 2*1Gb SFP– Layer 2
- The HP OfficeConnect 1920S Series (JL381A) is a smart-managed Layer 2 switch designed for small and medium-sized businesses.
- The JL381A switch is designed to deliver wire-speed gigabit Ethernet connectivity with up to 80 Gbps switching capacity and up to 59.5 Mpps throughput.
- The switch supports both web-based and command-line interface (CLI) management, as well as SNMP, RMON, and LLDP protocols for network monitoring and control.
- The switch provides advanced security features such as Access Control Lists (ACLs), 802.1X port authentication, and MAC-based authentication to protect the network from unauthorized access and attacks.
Cisco (SG300-10MPP) – 12 Port (10* 1G (RJ45) , 2*1G SFP[combo]) (PoE+) Ports – Layer 3 Static Routing, Managed Switch
- Cisco (SG300-10MPP) switch can provide up to 62W of PoE+ power to connected devices, such as IP phones, wireless access points, and IP cameras.
- The switch can perform basic Layer 3 routing tasks, allowing it to connect multiple VLANs and route traffic between them.
- The switch supports QoS features such as prioritization and rate limiting, which can help ensure that critical applications have the bandwidth they need.
- The switch can handle up to 10 Gbps of traffic, making it suitable for small and medium-sized networks.
- Web-based management: The switch can be configured and managed using a web-based interface, which makes it easy to set up and maintain
Lenovo RackSwitch G8272 – 48x10Gb (SFP/SFP+) Ports – 6x40Gb(QSFP+) Ports – Layer 3 – Managed – Dual Power supply – Rear-to-Front Airflow
- The Enterprise NOS (ENOS) has a feature-rich design with virtualization, high availability, and enterprise class Layer 2 and Layer 3 functionality.
- It supports Network virtualization VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.
- Advanced Layer 2/3/4 switching and routing capabilities, including Virtual Router Redundancy Protocol (VRRP), Border Gateway Protocol (BGP), and Equal-Cost Multipath (ECMP)
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- Support for OpenFlow 1.3 and 1.4 for software-defined networking (SDN) applications
- Hot-swappable power supplies and fan modules for high availability and easy maintenance
Lenovo RackSwitch NE10032 – 32 Ports of 40GbE or 100GbE ( QSFP+/QSFP28) – Layer 3 – Managed
- Cloud and virtualization solutions with VM-aware network automation and integration into Lenovo and third-party IT and cloud infrastructure management tools
- The 10 Gb/25 Gb/40 Gb/100 Gb Ethernet NE10032 RackSwitch provides a combination of low latency, non-blocking line-rate switching, and ease of management with 6.4 Tbps throughput.
- The NE10032 RackSwitch includes Layer 3 functionality, which provides security and performance benefits, as inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers
- The NE10032 switch supports VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.
Lenovo RackSwitch G8332 – 32 * 40 Gigabit (QSFP+), 2.56 Tbps throughput, Full-featured L2 and L3, Managed
- Lenovo RackSwitch G8332 is a 1U rack-mountable aggregation switch used for combining traffic from multiple high-speed server racks. It has 32 QSFP+ ports,
- Ultra-low latency and 2.56 Tbps throughput. It is an enterprise-class, full-featured L2 and L3 data center switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data.
- It supports 10 Gigabit Ethernet, 40 Gigabit Ethernet, Converged Enhanced Ethernet (CEE/DCB), and iSCSI configurations.
- The switch uses a wire-speed, non-blocking switching fabric that provides simultaneous wire-speed transport of multiple packets at low latency on all ports.
- The switch has exceptional port density and flexibility with break-out cables, and can support up to 96x 10 Gigabit Ethernet connections and still have 8x 40 Gigabit Ethernet uplinks.
IBM 2498-24E 8Gb 24-Port Fibre Channel FC SAN Switch
- IBM System Storage SAN24B-4 Express , 8 Gbps SAN switches is designed to provide high-performance switching platforms used to interconnect storage devices and servers in storage area networks (SANs).
- Auto-sensing FC ports supporting 1, 2, 4, and 8 Gbps
- It can also be used to address the SAN requirements of a small- to medium-sized workgroup
TP-Link (TL-SG1024D) Switch – 24 Gigabit Ethernet Ports, Layer 2,Plug & Play
- 24 Gigabit Ethernet Ports.
- Supports MAC address auto-learning and auto-aging
- 8K MAC address table, 12.8 Gbps switching capacity.
- 13-inch steel case, suitable for rack-mounting or desktop installation.
- Plug and play design simplifies installation.
- Fanless design ensures quiet operation.