Only logged in customers who have purchased this product may leave a review.
10 Switches Cisco 3650 48P 1G PoE+ +3 Switches Cisco 3650 24/48P 1G PoE+
عدد (10)
📌Cisco 3650 24P 1G PoE+
24 Port 1G PoE+
Layer 3 Switch
4 Port SFP
With Rackmounts
___________
🔥FREE🔥
عدد (2)
Cisco 3650 48P 1G PoE+
عدد (1)
Cisco 3650 24P 1G PoE+
Related products
Lenovo RackSwitch G8272 – 48x10Gb (SFP/SFP+) Ports – 6x40Gb(QSFP+) Ports – Layer 3 – Managed – Dual Power supply – Rear-to-Front Airflow
- The Enterprise NOS (ENOS) has a feature-rich design with virtualization, high availability, and enterprise class Layer 2 and Layer 3 functionality.
- It supports Network virtualization VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.
- Advanced Layer 2/3/4 switching and routing capabilities, including Virtual Router Redundancy Protocol (VRRP), Border Gateway Protocol (BGP), and Equal-Cost Multipath (ECMP)
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- Support for OpenFlow 1.3 and 1.4 for software-defined networking (SDN) applications
- Hot-swappable power supplies and fan modules for high availability and easy maintenance
HPE OfficeConnect 1920s Series (JL381A) Switch – 24 Gigabit Ports – 2*1Gb SFP– Layer 2
- The HP OfficeConnect 1920S Series (JL381A) is a smart-managed Layer 2 switch designed for small and medium-sized businesses.
- The JL381A switch is designed to deliver wire-speed gigabit Ethernet connectivity with up to 80 Gbps switching capacity and up to 59.5 Mpps throughput.
- The switch supports both web-based and command-line interface (CLI) management, as well as SNMP, RMON, and LLDP protocols for network monitoring and control.
- The switch provides advanced security features such as Access Control Lists (ACLs), 802.1X port authentication, and MAC-based authentication to protect the network from unauthorized access and attacks.
TP-Link (TL-SG1016 PE) Switch – 16 Gigabit Ethernet Ports , 8 Port (PoE+), Layer 2
- The TP-Link (TL-SG1016 PE) switch provides 16 Gigabit Ethernet ports, with PoE+ support on 8 of its ports.
- The PoE+ ports can provide up to 30 watts of power each, which is sufficient for most PoE-enabled devices.
- The switch supports VLANs, LACP, and STP, providing advanced networking features for network aggregation, improved performance, and loop prevention.
- The switch’s Energy-efficient Ethernet (EEE) compliance helps to reduce power consumption and operating costs.
HP StorageWorks 8/20q Fibre Channel Switch-20*8Gb FC-1 U- (AK241)
- 20 x 8Gb Fibre Channel Ports
- Hot-swappable 8 Gbps SFP optical transceivers
- Non-Disruptive Code Load and Activation (NDCLA)
- Drag-and-drop zoning
- Adaptive trunking, intelligent path selection
- It allows the user to view two saved configurations and compare the differences
- Transparent Routing (TR) technology – Seamless operation: HP B and C-series SANs
- Integrated end-to-end management-server to storage
HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Dell Switch (5424) -24 x 1 Gigabit Ethernet
- 24 10/100/1000BASE-T auto-sensing Gigabit Ethernet switching ports
- 4 SFP combo slots for fiber media support (Note: SFP slots are used instead of the built-in 10/100/1000BaseT ports)
- Auto-negotiation for speed, duplex mode and flow control
- Auto MDI/MDIX Port mirroring Broadcast storm control
- Switch Fabric Capacity 48.0 Gbps
- Forwarding Rate 35.6 Mpps
- Up to 8,000 MAC Addresses
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
DrayTek Vigor Switch (G1240) 24-Port Switch 24 x 1 Gigabit Ethernet Ports
- 4 SFP (Fiber Module) Ports
- -ort Based and 802.1q VLAN
- Auto-Negotiation, Auto-MDIX
- Flow Control: Back pressure for Half-Duplex
- 802.3x Pause Frame for Full-Duplex
- Switch Fabric: 48Gbps / non-blocking
- Wire speed performance
- Mac Address: 8 K MAC address table
- Package buffer memory: 500K Bytes
- Jumbo frame support to 9600 bytes
3Com Switch 2824 (CBlUG24)- 24 x 1Gigabit Ethernet
24 autosensing 10/100/1000 Ethernet Standards conformance: ISO 8802-3, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.1d (bridging), IEEE 802.3x (flow control), IEEE 802.3ab (Gigabit Ethernet) Media interfaces: 10/100/1000BASE-TX/RJ-45 Switching features: Store-and-forward; full-/half-duplex auto-negotiation; Class-of-Service (CoS) 802.1p traffic prioritization (priority queuing) MAC addresses: 32,000 LED indicators: Power, network traffic/duplex mode, link status/speed Electrical power: Power inlet: IEC 320 AC line frequency: 50/60 Hz Input voltage: 100-240 VAC Current rating: 1A, max Maximum power consumption: 21W Maximum power
NETGEAR Switch ( GS728TP) -24 x 1 Gigabit Ethernet POE
- Port Configuration- 28 ports, includes 24 gigabit ports and 4 x 1G SFP ports
- Power-Over-Ethernet- 24 PoE+ ports with 190W total power budget
- Flexibility From Uplink Ports- 4 x 1G SFP ports
- Advanced Configuration and Control- Management software with easy-to-use GUI interface offers refined control for secure setup, access, and SNMP (NMS 300) management.
- Energy Efficient- Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode.
- Built To Last- Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance
NETGEAR Switch ProSafe (GSM 7224)-24 x1Gigabit Ethernet -Layer 2 Switch
- The Netgear GSM7224 is in the ProSafe family of Netgear switches, providing enterprise-class performance and reliability at an affordable price. The Netgear switch has twenty-four Gigabit Ethernet ports (10/100/1000 Mbps) as well as four SFP combo ports. The combo ports are used for stacking and linking additional equipment, allowing your network to grow as your business does. Popular features of the GSM7224 ProSafe switch are VLAN support, Layer 2, managed, Quality of Service
- 24 Ports ,Gigabit Ethernet
- 4 SFP Combo Ports
- Layer 2, Managed
- Quality of Service (QoS),VLAN Support
- 48 Gbps Non-Blocking Bandwidth
- Telnet Remote Management
HPE FlexNetwork 5130 JH325A – L3 – Managed – 24 Ports PoE+ 4x 10G SFP+
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports
- Fixed 10GbE ports for high-speed stacking or uplinks
- Provide higher efficiency in IP phone, wireless access point
- Support for multiple services
- Comprehensive security control policies
- Diversified quality of service (QoS) policies
- Excellent manageability



















Reviews
There are no reviews yet.