Only logged in customers who have purchased this product may leave a review.
3Com Switch 2824 (CBlUG24)- 24 x 1Gigabit Ethernet
24 autosensing 10/100/1000 Ethernet Standards conformance: ISO 8802-3, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.1d (bridging), IEEE 802.3x (flow control), IEEE 802.3ab (Gigabit Ethernet) Media interfaces: 10/100/1000BASE-TX/RJ-45 Switching features: Store-and-forward; full-/half-duplex auto-negotiation; Class-of-Service (CoS) 802.1p traffic prioritization (priority queuing) MAC addresses: 32,000 LED indicators: Power, network traffic/duplex mode, link status/speed Electrical power: Power inlet: IEC 320 AC line frequency: 50/60 Hz Input voltage: 100-240 VAC Current rating: 1A, max Maximum power consumption: 21W Maximum power
Related products
Lenovo RackSwitch NE10032 – 32 Ports of 40GbE or 100GbE ( QSFP+/QSFP28) – Layer 3 – Managed
- Cloud and virtualization solutions with VM-aware network automation and integration into Lenovo and third-party IT and cloud infrastructure management tools
- The 10 Gb/25 Gb/40 Gb/100 Gb Ethernet NE10032 RackSwitch provides a combination of low latency, non-blocking line-rate switching, and ease of management with 6.4 Tbps throughput.
- The NE10032 RackSwitch includes Layer 3 functionality, which provides security and performance benefits, as inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers
- The NE10032 switch supports VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.
HP 5500 series Switch (JG542A) -POE+ – L3-Managed – 48*1GB Ethernet Ports-4*1GB SFP 2*10GB SFP+ – Dual Power Supply
- The HP 5500 series switch delivers unrivaled resiliency, security, and multi-service capabilities at the edge of branch and large campus networks
- 48 auto-sensing GigabitEthernet PoE+ ports
- 4 fixed GbE SFP ports, 2* 10GbE SFP+ ports
- 1 GB SDRAM, Packet buffer capacity: 6 MB and 512 MB flash
- 224 Gb/s routing/switching performance
- Stacking capability – IRF, 9 switches
TP-Link (TL-SG1016 PE) Switch – 16 Gigabit Ethernet Ports , 8 Port (PoE+), Layer 2
- The TP-Link (TL-SG1016 PE) switch provides 16 Gigabit Ethernet ports, with PoE+ support on 8 of its ports.
- The PoE+ ports can provide up to 30 watts of power each, which is sufficient for most PoE-enabled devices.
- The switch supports VLANs, LACP, and STP, providing advanced networking features for network aggregation, improved performance, and loop prevention.
- The switch’s Energy-efficient Ethernet (EEE) compliance helps to reduce power consumption and operating costs.
TP-Link (TL-SG1024) Switch – 24 Gigabit Ethernet Ports, Unmanaged, Layer 2
- The TL-SG1024 Gigabit Ethernet Switch provides you with a high-performance, low-cost, Easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network.
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Innovative energy-efficient technology saves power consumption
- Supports MAC address self-learning and auto MDI/MDIX
NETGEAR Switch ( GS728TP) -24 x 1 Gigabit Ethernet POE
- Port Configuration- 28 ports, includes 24 gigabit ports and 4 x 1G SFP ports
- Power-Over-Ethernet- 24 PoE+ ports with 190W total power budget
- Flexibility From Uplink Ports- 4 x 1G SFP ports
- Advanced Configuration and Control- Management software with easy-to-use GUI interface offers refined control for secure setup, access, and SNMP (NMS 300) management.
- Energy Efficient- Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode.
- Built To Last- Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance
NETGEAR Switch (GS716T) -16 x1 Gigabit Ethernet -2 SFP Fiber Ports
NETGEAR ProSafe GS716Tv2 – switch – 16 ports Device Type Switch Form Factor External – 1U Dimensions (WxDxH) 17.3 in x 10.2 in x 1.7 in Weight 5.7 lbs Localization North America Ports Qty 16 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T, Ethernet 1000Base-X Data Transfer Rate 1 Gbps Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet Empty Slots 2 x shared SFP (mini-GBIC) Remote Management Protocol SNMP 1, SNMP 3, SNMP 2c, HTTP, HTTPS Communication Mode Half-duplex, full-duplex Features Flow control, full duplex capability, auto-sensing per device, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, store and forward, SNTP support Compliant Standards IEEE 802.3u.
DrayTek Vigor Switch (G1240) 24-Port Switch 24 x 1 Gigabit Ethernet Ports
- 4 SFP (Fiber Module) Ports
- -ort Based and 802.1q VLAN
- Auto-Negotiation, Auto-MDIX
- Flow Control: Back pressure for Half-Duplex
- 802.3x Pause Frame for Full-Duplex
- Switch Fabric: 48Gbps / non-blocking
- Wire speed performance
- Mac Address: 8 K MAC address table
- Package buffer memory: 500K Bytes
- Jumbo frame support to 9600 bytes
Cisco Catalyst 3650 Switch – 24*1GB Ports – 4*1GB SFP Uplinks – L3 – Managed- Stackable Switch
- The Cisco Catalyst 3650 Series Switch, with Cisco StackWise-160 Technology, can stack 9 switches and support up to 160 Gpbs stack bandwidth.
- The Cisco 3650 Catalyst Switch is the next generation of enterprise-class standalone and stackable (optional) access-layer switches that provide the foundation for full convergence between wired and wireless on a single platform.
- The Cisco Catalyst 3650 is built on the advanced Cisco StackWise-160, and takes advantage of the new Cisco Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC).
- This Cisco 3650 Catalyst switch can enable uniform wired-wireless policy enforcement.
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
Lenovo RackSwitch G8332 – 32 * 40 Gigabit (QSFP+), 2.56 Tbps throughput, Full-featured L2 and L3, Managed
- Lenovo RackSwitch G8332 is a 1U rack-mountable aggregation switch used for combining traffic from multiple high-speed server racks. It has 32 QSFP+ ports,
- Ultra-low latency and 2.56 Tbps throughput. It is an enterprise-class, full-featured L2 and L3 data center switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data.
- It supports 10 Gigabit Ethernet, 40 Gigabit Ethernet, Converged Enhanced Ethernet (CEE/DCB), and iSCSI configurations.
- The switch uses a wire-speed, non-blocking switching fabric that provides simultaneous wire-speed transport of multiple packets at low latency on all ports.
- The switch has exceptional port density and flexibility with break-out cables, and can support up to 96x 10 Gigabit Ethernet connections and still have 8x 40 Gigabit Ethernet uplinks.
NEC QX-S1024GT-4G 24-Port Gigabit Ethernet Switch with Managed L2 Features, GUI Management, and Fanless Silent Design [Brand New, Packaging not included]
- Ease of use (WEB GUI or CLI)
- Fanless silent design
- Supports Energy Efficient Ethernet (EEE) function, which is an energy-saving function
- Achieves advanced QoS with 8-class priority control queue, bandwidth control, and PQ/WRR scheduling based on CoS/DSCP
- IEEE802.1X authentication/MAC address authentication prohibits communication from unauthorized terminals
- Supports IGMPv1/v2/v3 snooping as a multicast function
- Filtering by access control list (ACL) by MAC address, IP address, etc. is possible
- Supports link aggregation (LACP support), multi-port loop detection, and port mirroring functions
- SNMPv1/v2c/v3, alive monitoring by ping response is possible
- Supports management functions such as telnet/ssh/ftp/tftp/ntp client/syslog/web console
LG iPecs Switch (ES-2026P) with 24 x 1Fast Ethernet and 2 SFP/Gigabit Ethernet Ports POE
- L2 Managed Switch with web-based management supporting SNMP, RMONv1, SNTP, HTTP, and HTTPS protocols
- Quality of Service (QoS) support for prioritizing network traffic
- 24 RJ-45 Ethernet ports for basic switching
- Compatibility with 1000BASE-T and 100BASE-TX Ethernet standards
- MAC address table with 8000 entries and a switching capacity of 8.8 Gbit/s
- Access Control List (ACL) for enhanced security
- Rack-mountable design for convenient installation
- Power over Ethernet (PoE) capability for powering devices over the network.
Recently Viewed
WatchGuard Firebox M200 High Availability Firewall, 8x 1 Gigabit Ethernet
- Firewall Stateful packet inspection, deep packet inspection, proxy firewall
- Application Proxies HTTP, HTTPS, SMTP, FTP, DNS, TCP, POP3
- Threat Protection,DoS attacks, fragmented & malformed packets, blended threats & more
- VoIP,H.323, SIP, call setup and session security
- Filtering options Browser Safe Search, YouTube for Schools
- Security Subscriptions,Application Control, IPS, WebBlocker, GAV, Data Loss Prevention, spamBlocker, Reputation Enabled Defense, APT Blocker
DELL SonicWALL SRA 4600 Secure Remote Access Appliance
- -Device TypeVPN gateway
- Form FactorExternal-RAM2 GB
- Flash Memory1 GB,-4 Ports
- Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
- CapacityConcurrent users: 25 , Maximum number of users: 500-PowerAC 100/230 V (50/60 Hz)
- This listing is for a DELL SonicWALL SRA 4600 Secure Remote Access Appliance. It was pulled from a working environment, power tested, and powers on as it should. It requires a standard 3 prong power cord which will be included with purchase. Unit is missing a rack mount bracket. There are signs of wear from previous use. All photos are of the item that you will receive. We do not provide tech support or any software that is not already installed on this device. If you have any questions, feel free to contact me





























Reviews
There are no reviews yet.