Only logged in customers who have purchased this product may leave a review.
5 SWITCHES Cisco Catalyst 3650 48P PoE+ Uplink 1G +5 SWITCHES ARUBA S2500 48P 1G PoE Uplink 10G+ 5 SWITCHES ARUBA S2500 48P 1G PoE Uplink 1G
عدد ( 5 سويتشات)
📌Cisco Catalyst 3650 48P PoE+ Uplink 1G
◾48Port 1G PoE+
◾Uplink 1G
◾Layer 3 Switch
◾Power Supply 1025W
🔺With Rackmounts
___________
عدد ( 5 سويتشات)
📌ARUBA S2500 48P 1G PoE Uplink 10G🔥🔥
* 48Port 1G POE
* 4Port SFP+ 10G ( 4*10G )🔥
* Layer 3 Switch
* Web interface
* With Rackmounts
____________
عدد ( 5 سويتشات)
📌ARUBA S2500 48P 1G PoE Uplink 1G
* 48Port 1G POE
* Uplink 4Port SFP 1G
* Layer 3 Switch
* Web interface
* With Rackmounts
Related products
Dell Power Connect (2748) – 48 x 1 Gigabit Ethernet – 2 SFP
- Ideal for Small Office or Home Office
- Primary use to connect workstations and other network devices
- 48 Ports Gigabit Speeds
- 4 SFP Combo Ports
- VLAN Support
- Quality of Service (QoS)
- Rack Mountable
- Metal Chassis
- Web Browser Managed
- Managed / Unmanaged / Secured Modes
- Back Pressure Support
- Status Indicators (link activity, port transmission speed, Power, link OK)
NETGEAR Switch ( GS728TP) -24 x 1 Gigabit Ethernet POE
- Port Configuration- 28 ports, includes 24 gigabit ports and 4 x 1G SFP ports
- Power-Over-Ethernet- 24 PoE+ ports with 190W total power budget
- Flexibility From Uplink Ports- 4 x 1G SFP ports
- Advanced Configuration and Control- Management software with easy-to-use GUI interface offers refined control for secure setup, access, and SNMP (NMS 300) management.
- Energy Efficient- Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode.
- Built To Last- Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance
HP A5120 EI Switch Series (JG245A), Layer 3, Managed Gigabit Ethernet switch with 24 10/100/1000 BaseT ports (NEW)
- Provides Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.
- Offers high scalability with two expansion slots that can support two-port 10GbE expansion modules.
- Features Unique Intelligent Resilient Framework (IRF) technology for creating virtual fabrics by virtualizing multiple switches into a single logical device.
- Provides high availability, simplified management, and comprehensive security
HPE FlexNetwork 5130 JH325A – L3 – Managed – 24 Ports PoE+ 4x 10G SFP+
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports
- Fixed 10GbE ports for high-speed stacking or uplinks
- Provide higher efficiency in IP phone, wireless access point
- Support for multiple services
- Comprehensive security control policies
- Diversified quality of service (QoS) policies
- Excellent manageability
TP-Link (TL-SG1016 PE) Switch – 16 Gigabit Ethernet Ports , 8 Port (PoE+), Layer 2
- The TP-Link (TL-SG1016 PE) switch provides 16 Gigabit Ethernet ports, with PoE+ support on 8 of its ports.
- The PoE+ ports can provide up to 30 watts of power each, which is sufficient for most PoE-enabled devices.
- The switch supports VLANs, LACP, and STP, providing advanced networking features for network aggregation, improved performance, and loop prevention.
- The switch’s Energy-efficient Ethernet (EEE) compliance helps to reduce power consumption and operating costs.
HP ProCurve 1400-24G (J9078A)- Gigabit Ethernet
The HP 1400-24G (J9078A) is a 24 port Ethernet switch designed to be as simple as possible. The J9078A switch is an “unmanaged” switch meaning it auto-configures itself for you. The HP 1400-24G was designed without fans making it one of the quietest switches available. The J9078A is the perfect choice for those lacking a dedicated server room.
Lenovo RackSwitch G8332 – 32 * 40 Gigabit (QSFP+), 2.56 Tbps throughput, Full-featured L2 and L3, Managed
- Lenovo RackSwitch G8332 is a 1U rack-mountable aggregation switch used for combining traffic from multiple high-speed server racks. It has 32 QSFP+ ports,
- Ultra-low latency and 2.56 Tbps throughput. It is an enterprise-class, full-featured L2 and L3 data center switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data.
- It supports 10 Gigabit Ethernet, 40 Gigabit Ethernet, Converged Enhanced Ethernet (CEE/DCB), and iSCSI configurations.
- The switch uses a wire-speed, non-blocking switching fabric that provides simultaneous wire-speed transport of multiple packets at low latency on all ports.
- The switch has exceptional port density and flexibility with break-out cables, and can support up to 96x 10 Gigabit Ethernet connections and still have 8x 40 Gigabit Ethernet uplinks.
DrayTek Vigor Switch (G1240) 24-Port Switch 24 x 1 Gigabit Ethernet Ports
- 4 SFP (Fiber Module) Ports
- -ort Based and 802.1q VLAN
- Auto-Negotiation, Auto-MDIX
- Flow Control: Back pressure for Half-Duplex
- 802.3x Pause Frame for Full-Duplex
- Switch Fabric: 48Gbps / non-blocking
- Wire speed performance
- Mac Address: 8 K MAC address table
- Package buffer memory: 500K Bytes
- Jumbo frame support to 9600 bytes
3Com Switch 2824 (CBlUG24)- 24 x 1Gigabit Ethernet
24 autosensing 10/100/1000 Ethernet Standards conformance: ISO 8802-3, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.1d (bridging), IEEE 802.3x (flow control), IEEE 802.3ab (Gigabit Ethernet) Media interfaces: 10/100/1000BASE-TX/RJ-45 Switching features: Store-and-forward; full-/half-duplex auto-negotiation; Class-of-Service (CoS) 802.1p traffic prioritization (priority queuing) MAC addresses: 32,000 LED indicators: Power, network traffic/duplex mode, link status/speed Electrical power: Power inlet: IEC 320 AC line frequency: 50/60 Hz Input voltage: 100-240 VAC Current rating: 1A, max Maximum power consumption: 21W Maximum power
NETGEAR Switch ProSafe (GSM 7224)-24 x1Gigabit Ethernet -Layer 2 Switch
- The Netgear GSM7224 is in the ProSafe family of Netgear switches, providing enterprise-class performance and reliability at an affordable price. The Netgear switch has twenty-four Gigabit Ethernet ports (10/100/1000 Mbps) as well as four SFP combo ports. The combo ports are used for stacking and linking additional equipment, allowing your network to grow as your business does. Popular features of the GSM7224 ProSafe switch are VLAN support, Layer 2, managed, Quality of Service
- 24 Ports ,Gigabit Ethernet
- 4 SFP Combo Ports
- Layer 2, Managed
- Quality of Service (QoS),VLAN Support
- 48 Gbps Non-Blocking Bandwidth
- Telnet Remote Management
NEC QX-S1024GT-4G 24-Port Gigabit Ethernet Switch with Managed L2 Features, GUI Management, and Fanless Silent Design [Brand New, Packaging not included]
- Ease of use (WEB GUI or CLI)
- Fanless silent design
- Supports Energy Efficient Ethernet (EEE) function, which is an energy-saving function
- Achieves advanced QoS with 8-class priority control queue, bandwidth control, and PQ/WRR scheduling based on CoS/DSCP
- IEEE802.1X authentication/MAC address authentication prohibits communication from unauthorized terminals
- Supports IGMPv1/v2/v3 snooping as a multicast function
- Filtering by access control list (ACL) by MAC address, IP address, etc. is possible
- Supports link aggregation (LACP support), multi-port loop detection, and port mirroring functions
- SNMPv1/v2c/v3, alive monitoring by ping response is possible
- Supports management functions such as telnet/ssh/ftp/tftp/ntp client/syslog/web console
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces

















Reviews
There are no reviews yet.