Only logged in customers who have purchased this product may leave a review.
Arista 7150S-24
Related products
NETGEAR Switch ( GS728TP) -24 x 1 Gigabit Ethernet POE
- Port Configuration- 28 ports, includes 24 gigabit ports and 4 x 1G SFP ports
- Power-Over-Ethernet- 24 PoE+ ports with 190W total power budget
- Flexibility From Uplink Ports- 4 x 1G SFP ports
- Advanced Configuration and Control- Management software with easy-to-use GUI interface offers refined control for secure setup, access, and SNMP (NMS 300) management.
- Energy Efficient- Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode.
- Built To Last- Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance
HP 5500 series Switch (JG542A) -POE+ – L3-Managed – 48*1GB Ethernet Ports-4*1GB SFP 2*10GB SFP+ – Dual Power Supply
- The HP 5500 series switch delivers unrivaled resiliency, security, and multi-service capabilities at the edge of branch and large campus networks
- 48 auto-sensing GigabitEthernet PoE+ ports
- 4 fixed GbE SFP ports, 2* 10GbE SFP+ ports
- 1 GB SDRAM, Packet buffer capacity: 6 MB and 512 MB flash
- 224 Gb/s routing/switching performance
- Stacking capability – IRF, 9 switches
Dell Switch (5424) -24 x 1 Gigabit Ethernet
- 24 10/100/1000BASE-T auto-sensing Gigabit Ethernet switching ports
- 4 SFP combo slots for fiber media support (Note: SFP slots are used instead of the built-in 10/100/1000BaseT ports)
- Auto-negotiation for speed, duplex mode and flow control
- Auto MDI/MDIX Port mirroring Broadcast storm control
- Switch Fabric Capacity 48.0 Gbps
- Forwarding Rate 35.6 Mpps
- Up to 8,000 MAC Addresses
Lenovo RackSwitch NE10032 – 32 Ports of 40GbE or 100GbE ( QSFP+/QSFP28) – Layer 3 – Managed
- Cloud and virtualization solutions with VM-aware network automation and integration into Lenovo and third-party IT and cloud infrastructure management tools
- The 10 Gb/25 Gb/40 Gb/100 Gb Ethernet NE10032 RackSwitch provides a combination of low latency, non-blocking line-rate switching, and ease of management with 6.4 Tbps throughput.
- The NE10032 RackSwitch includes Layer 3 functionality, which provides security and performance benefits, as inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers
- The NE10032 switch supports VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.
NETGEAR Switch (GS724t) – 24 x 1 Gigabit Ethernet
- Product Description NETGEAR GS724T – switch – 24 ports Device Type Switch Form Factor External – 1 U
- Ports Qty 24 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T Data Transfer Rate 1 Gbps
- Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet Empty Slots 2 x SFP (mini-GBIC)
HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
NETGEAR Switch (GS716T) -16 x1 Gigabit Ethernet -2 SFP Fiber Ports
NETGEAR ProSafe GS716Tv2 – switch – 16 ports Device Type Switch Form Factor External – 1U Dimensions (WxDxH) 17.3 in x 10.2 in x 1.7 in Weight 5.7 lbs Localization North America Ports Qty 16 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T, Ethernet 1000Base-X Data Transfer Rate 1 Gbps Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet Empty Slots 2 x shared SFP (mini-GBIC) Remote Management Protocol SNMP 1, SNMP 3, SNMP 2c, HTTP, HTTPS Communication Mode Half-duplex, full-duplex Features Flow control, full duplex capability, auto-sensing per device, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, store and forward, SNTP support Compliant Standards IEEE 802.3u.
F5 (BIG-IP-1600) Series -4*1Gigabit Ethernet Ports- 2*1GB SFP- 4GB RAM – Dual Core Processor
- F5 BIG-IP 1600 Global Traffic Manager (GTM) distributes DNS and user application requests based on business policies, data center and network conditions
- BIG-IP GTM delivers F5’s high-performance DNS Services with visibility, reporting, and analysis
- Scales and secures DNS responses geographically to survive DDoS attacks; delivers a complete, real-time DNSSEC solution
TP-Link (TL-SG1016 PE) Switch – 16 Gigabit Ethernet Ports , 8 Port (PoE+), Layer 2
- The TP-Link (TL-SG1016 PE) switch provides 16 Gigabit Ethernet ports, with PoE+ support on 8 of its ports.
- The PoE+ ports can provide up to 30 watts of power each, which is sufficient for most PoE-enabled devices.
- The switch supports VLANs, LACP, and STP, providing advanced networking features for network aggregation, improved performance, and loop prevention.
- The switch’s Energy-efficient Ethernet (EEE) compliance helps to reduce power consumption and operating costs.
Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply
- The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .
- It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.
- The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.
- The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.
- The switch also includes replaceable dual power supply units and a fan tray module.
3Com Switch 2824 (CBlUG24)- 24 x 1Gigabit Ethernet
24 autosensing 10/100/1000 Ethernet Standards conformance: ISO 8802-3, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.1d (bridging), IEEE 802.3x (flow control), IEEE 802.3ab (Gigabit Ethernet) Media interfaces: 10/100/1000BASE-TX/RJ-45 Switching features: Store-and-forward; full-/half-duplex auto-negotiation; Class-of-Service (CoS) 802.1p traffic prioritization (priority queuing) MAC addresses: 32,000 LED indicators: Power, network traffic/duplex mode, link status/speed Electrical power: Power inlet: IEC 320 AC line frequency: 50/60 Hz Input voltage: 100-240 VAC Current rating: 1A, max Maximum power consumption: 21W Maximum power
NEC QX-S1024GT-4G 24-Port Gigabit Ethernet Switch with Managed L2 Features, GUI Management, and Fanless Silent Design [Brand New, Packaging not included]
- Ease of use (WEB GUI or CLI)
- Fanless silent design
- Supports Energy Efficient Ethernet (EEE) function, which is an energy-saving function
- Achieves advanced QoS with 8-class priority control queue, bandwidth control, and PQ/WRR scheduling based on CoS/DSCP
- IEEE802.1X authentication/MAC address authentication prohibits communication from unauthorized terminals
- Supports IGMPv1/v2/v3 snooping as a multicast function
- Filtering by access control list (ACL) by MAC address, IP address, etc. is possible
- Supports link aggregation (LACP support), multi-port loop detection, and port mirroring functions
- SNMPv1/v2c/v3, alive monitoring by ping response is possible
- Supports management functions such as telnet/ssh/ftp/tftp/ntp client/syslog/web console
Recently Viewed
Cisco Router 4331 & Fortinet FortiGate 40F & 50E
⚫Cisco Router 4331
⚫Fortinet FortiGate 40F
With Original Adapter
⚫Fortinet FortiGate 50E
With Original Adapter
1Year warranty
HPE SYNERGY 12000 FRAME
HPE SYNERGY 12000 FRAME
* 6 ZONES FOR COMPUTE AND STORAGE , UP TO 12 HALF-HEIGHT OR 6 FULL-HEIGHT COMPUTE MODULES,
* 6 INTERCONNECT MODULE BAYS (3+3 REDUNDANCY) UP TO 40GB PER PORT
* 2 APPLIANCE BAYS FOR MANAGEMENT
* 10 FAN BAYS
* FRONT PANEL, FOR SYNERGY CONSOLE CONNECTIONS
* 6 POWER SUPPLIES BAYS (N+N, N+1 REDUNDANCY)
* HPE SYNERGY MANAGEMENT THAT MAXIMIZES POWER AND COOLING EFFICIENCY.
THE INCLUSER INCLUDE 12 COMPUTE MODULES,
HPE SYNERGY 480 GEN10 COMPUTE MODULE
1. UP TO TWO (2) INTEL®️ XEON®️ SCALABLE FAMILY PROCESSORS
UP TO 28 CORE PER PROCESSOR
2. TWENTY-FOUR (24) DDR4 DIMM MEMORY SLOTS (12 PER PROCESSOR)
3. REMOVABLE DRIVE CAGE WITH TWO HOT-PLUG DRIVE BAYS
( SAS/SATA/SSD SAS/SSD SATA 12BGB )
4.HPE SMART ARRAY P204I-C SR GEN10 CONTROLLER
5. SMART ARRAY BATTERY CONNECTION
6. REMOVABLE DRIVE CAGE WITH 2 HOT-PLUG DRIVE BAYS AND
CONNECTION POINT FOR M.2 DRIVE ADAPTOR KIT
7. MEZZANINE CONNECTORS (3 X16 PCIE 3.0)
8. COMPUTE MODULE POWER AND MANAGEMENT CONNECTOR
9. USB 3.0 MULTIPORT SUPPORT
10. ILO CHIPSET (UNDER DRIVE CAGE)
11. MICROSD SLOT (UNDER DRIVE CAGE)
——————————————
12*HPE SYNERGY 480 GEN10
24*INTEL XEON PLATINUM 8160 (2 FOR EACH NODE)
12*RAM 16GB DDR4 ECC (16GB FOR EACH NODE)
2 FORTINET FORTIGATE 30E WITH ORIGINAL ADAPTORS
QTY : 2
FORTINET FORTIGATE 30E
WITH ORIGINAL ADAPTORS
HP WorkStation Z4 G4
📌HP WorkStation Z4 G4
▪ CPU : Intel®️ Xeon®️ Processor W-2145 (Up To 4.50 Ghz)
▪ Memory 32GB DDR4 – ECC
▪ Storage 256GB NVME
▪ Graphics Card : Nvidia Quadro P4000 8G
▪ 1 year warranty



































Reviews
There are no reviews yet.