Only logged in customers who have purchased this product may leave a review.
Arista AS7312-54X switch + Cisco Catalyst 3650 48P 1G PoE+ Uplink 10G
Arista AS7312-54X switch
Ports
■ Switch Ports:
48 x 25G SFP28 plus 6 x 100G QSFP28 ports:
Each SFP28 supports 1 x 10 G or 25 GbE
Each QSFP28 supports 1×40/100 GbE or 4 x 25 GbE or
4 x 10 GbE per port using splitter cables
______________
📌Cisco Catalyst 3650 48P PoE+ Uplink 10G🔥
◾48Port 1G PoE+
◾Uplink 10G
◾Layer 3 Switch
◾Power Supply 1025W
🔺With Rackmounts
Related products
HP 5500 series Switch (JG542A) -POE+ – L3-Managed – 48*1GB Ethernet Ports-4*1GB SFP 2*10GB SFP+ – Dual Power Supply
- The HP 5500 series switch delivers unrivaled resiliency, security, and multi-service capabilities at the edge of branch and large campus networks
- 48 auto-sensing GigabitEthernet PoE+ ports
- 4 fixed GbE SFP ports, 2* 10GbE SFP+ ports
- 1 GB SDRAM, Packet buffer capacity: 6 MB and 512 MB flash
- 224 Gb/s routing/switching performance
- Stacking capability – IRF, 9 switches
DrayTek Vigor Switch (G1240) 24-Port Switch 24 x 1 Gigabit Ethernet Ports
- 4 SFP (Fiber Module) Ports
- -ort Based and 802.1q VLAN
- Auto-Negotiation, Auto-MDIX
- Flow Control: Back pressure for Half-Duplex
- 802.3x Pause Frame for Full-Duplex
- Switch Fabric: 48Gbps / non-blocking
- Wire speed performance
- Mac Address: 8 K MAC address table
- Package buffer memory: 500K Bytes
- Jumbo frame support to 9600 bytes
HP A5120 EI Switch Series (JG245A), Layer 3, Managed Gigabit Ethernet switch with 24 10/100/1000 BaseT ports (NEW)
- Provides Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.
- Offers high scalability with two expansion slots that can support two-port 10GbE expansion modules.
- Features Unique Intelligent Resilient Framework (IRF) technology for creating virtual fabrics by virtualizing multiple switches into a single logical device.
- Provides high availability, simplified management, and comprehensive security
Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply
- The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .
- It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.
- The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.
- The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.
- The switch also includes replaceable dual power supply units and a fan tray module.
Dell Power Connect (2748) – 48 x 1 Gigabit Ethernet – 2 SFP
- Ideal for Small Office or Home Office
- Primary use to connect workstations and other network devices
- 48 Ports Gigabit Speeds
- 4 SFP Combo Ports
- VLAN Support
- Quality of Service (QoS)
- Rack Mountable
- Metal Chassis
- Web Browser Managed
- Managed / Unmanaged / Secured Modes
- Back Pressure Support
- Status Indicators (link activity, port transmission speed, Power, link OK)
HPE OfficeConnect 1920s Series (JL381A) Switch – 24 Gigabit Ports – 2*1Gb SFP– Layer 2
- The HP OfficeConnect 1920S Series (JL381A) is a smart-managed Layer 2 switch designed for small and medium-sized businesses.
- The JL381A switch is designed to deliver wire-speed gigabit Ethernet connectivity with up to 80 Gbps switching capacity and up to 59.5 Mpps throughput.
- The switch supports both web-based and command-line interface (CLI) management, as well as SNMP, RMON, and LLDP protocols for network monitoring and control.
- The switch provides advanced security features such as Access Control Lists (ACLs), 802.1X port authentication, and MAC-based authentication to protect the network from unauthorized access and attacks.
TP-Link (TL-SG1016 PE) Switch – 16 Gigabit Ethernet Ports , 8 Port (PoE+), Layer 2
- The TP-Link (TL-SG1016 PE) switch provides 16 Gigabit Ethernet ports, with PoE+ support on 8 of its ports.
- The PoE+ ports can provide up to 30 watts of power each, which is sufficient for most PoE-enabled devices.
- The switch supports VLANs, LACP, and STP, providing advanced networking features for network aggregation, improved performance, and loop prevention.
- The switch’s Energy-efficient Ethernet (EEE) compliance helps to reduce power consumption and operating costs.
NETGEAR Switch ( GS728TP) -24 x 1 Gigabit Ethernet POE
- Port Configuration- 28 ports, includes 24 gigabit ports and 4 x 1G SFP ports
- Power-Over-Ethernet- 24 PoE+ ports with 190W total power budget
- Flexibility From Uplink Ports- 4 x 1G SFP ports
- Advanced Configuration and Control- Management software with easy-to-use GUI interface offers refined control for secure setup, access, and SNMP (NMS 300) management.
- Energy Efficient- Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode.
- Built To Last- Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance
Lenovo RackSwitch G8332 – 32 * 40 Gigabit (QSFP+), 2.56 Tbps throughput, Full-featured L2 and L3, Managed
- Lenovo RackSwitch G8332 is a 1U rack-mountable aggregation switch used for combining traffic from multiple high-speed server racks. It has 32 QSFP+ ports,
- Ultra-low latency and 2.56 Tbps throughput. It is an enterprise-class, full-featured L2 and L3 data center switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data.
- It supports 10 Gigabit Ethernet, 40 Gigabit Ethernet, Converged Enhanced Ethernet (CEE/DCB), and iSCSI configurations.
- The switch uses a wire-speed, non-blocking switching fabric that provides simultaneous wire-speed transport of multiple packets at low latency on all ports.
- The switch has exceptional port density and flexibility with break-out cables, and can support up to 96x 10 Gigabit Ethernet connections and still have 8x 40 Gigabit Ethernet uplinks.
HPE FlexNetwork 5130 JH325A – L3 – Managed – 24 Ports PoE+ 4x 10G SFP+
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports
- Fixed 10GbE ports for high-speed stacking or uplinks
- Provide higher efficiency in IP phone, wireless access point
- Support for multiple services
- Comprehensive security control policies
- Diversified quality of service (QoS) policies
- Excellent manageability
HP V1910-24G POE (JE007A) Switch – 24 Gigabit Ethernet Ports – 4 SFP – Layer 3 Static Routing
- The HP V1910-24G switch is a powerful networking device that offers 24 Gigabit Ethernet ports for fast and reliable connectivity.
- The switch also supports Layer 3 static routing, which allows you to route traffic between different networks and subnets.
- Web-based management and a command-line interface (CLI) make it easy to configure and manage the switch.
- With support for VLANs, LACP, and STP, this switch provides advanced networking features to help you manage your network more efficiently.
HP ProCurve 1400-24G (J9078A)- Gigabit Ethernet
The HP 1400-24G (J9078A) is a 24 port Ethernet switch designed to be as simple as possible. The J9078A switch is an “unmanaged” switch meaning it auto-configures itself for you. The HP 1400-24G was designed without fans making it one of the quietest switches available. The J9078A is the perfect choice for those lacking a dedicated server room.
Recently Viewed
Arista AS7312-54X switch + Cisco Catalyst 3650 48P 1G PoE+ Uplink 10G
Arista AS7312-54X switch
Ports
■ Switch Ports:
48 x 25G SFP28 plus 6 x 100G QSFP28 ports:
Each SFP28 supports 1 x 10 G or 25 GbE
Each QSFP28 supports 1×40/100 GbE or 4 x 25 GbE or
4 x 10 GbE per port using splitter cables
______________
📌Cisco Catalyst 3650 48P PoE+ Uplink 10G🔥
◾48Port 1G PoE+
◾Uplink 10G
◾Layer 3 Switch
◾Power Supply 1025W
🔺With Rackmounts




















Reviews
There are no reviews yet.