Brocade NetIron CES 2048FX Switch

SKU: 11334 Categories: Switches, Fibre Switches Brand: Brocade

Reviews (0)

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)

Rated 0 out of 5

(0)

Highlight

It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports

Fibre Switches, Switches

Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed

Rated 0 out of 5

(0)

Highlight

The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
Advanced features such as QoS, ACLs, IPv6 support, and more
Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.

Easy management with web-based GUI and CLI interfaces

Lenovo RackSwitch G8272 – 48x10Gb (SFP/SFP+) Ports – 6x40Gb(QSFP+) Ports – Layer 3 – Managed – Dual Power supply – Rear-to-Front Airflow

Rated 0 out of 5

(0)

Highlight

The Enterprise NOS (ENOS) has a feature-rich design with virtualization, high availability, and enterprise class Layer 2 and Layer 3 functionality.

It supports Network virtualization VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.

Advanced Layer 2/3/4 switching and routing capabilities, including Virtual Router Redundancy Protocol (VRRP), Border Gateway Protocol (BGP), and Equal-Cost Multipath (ECMP)

The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.

Support for OpenFlow 1.3 and 1.4 for software-defined networking (SDN) applications

Hot-swappable power supplies and fan modules for high availability and easy maintenance

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

HP ProCurve 1400-24G (J9078A)- Gigabit Ethernet

Rated 0 out of 5

(0)

Highlight

The HP 1400-24G (J9078A) is a 24 port Ethernet switch designed to be as simple as possible. The J9078A switch is an “unmanaged” switch meaning it auto-configures itself for you. The HP 1400-24G was designed without fans making it one of the quietest switches available. The J9078A is the perfect choice for those lacking a dedicated server room.

Switches

TP-Link (TL-SG1016 PE) Switch – 16 Gigabit Ethernet Ports , 8 Port (PoE+), Layer 2

Rated 0 out of 5

(0)

Highlight

The TP-Link (TL-SG1016 PE) switch provides 16 Gigabit Ethernet ports, with PoE+ support on 8 of its ports.
The PoE+ ports can provide up to 30 watts of power each, which is sufficient for most PoE-enabled devices.
The switch supports VLANs, LACP, and STP, providing advanced networking features for network aggregation, improved performance, and loop prevention.
The switch’s Energy-efficient Ethernet (EEE) compliance helps to reduce power consumption and operating costs.

Lenovo RackSwitch G8332 – 32 * 40 Gigabit (QSFP+), 2.56 Tbps throughput, Full-featured L2 and L3, Managed

Rated 0 out of 5

(0)

Highlight

Lenovo RackSwitch G8332 is a 1U rack-mountable aggregation switch used for combining traffic from multiple high-speed server racks. It has 32 QSFP+ ports,
Ultra-low latency and 2.56 Tbps throughput. It is an enterprise-class, full-featured L2 and L3 data center switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data.
It supports 10 Gigabit Ethernet, 40 Gigabit Ethernet, Converged Enhanced Ethernet (CEE/DCB), and iSCSI configurations.
The switch uses a wire-speed, non-blocking switching fabric that provides simultaneous wire-speed transport of multiple packets at low latency on all ports.
The switch has exceptional port density and flexibility with break-out cables, and can support up to 96x 10 Gigabit Ethernet connections and still have 8x 40 Gigabit Ethernet uplinks.

Switches, 1G Non-PoE, 48 Port 1G Non PoE, Ethernet Switches, Non PoE

HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing

Rated 0 out of 5

(0)

Highlight

Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
Layer 3 static routing with 32 routes for network segmentation and expansion

Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply

Rated 0 out of 5

(0)

Highlight

The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .

It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.

The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.

The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.

The switch also includes replaceable dual power supply units and a fan tray module.

Switches, 1G PoE, 24 Port 1G PoE, Ethernet Switches, PoE, Uplink 1G | 24 Port 1G PoE

NETGEAR Switch ( GS728TP) -24 x 1 Gigabit Ethernet POE

Rated 0 out of 5

(0)

Highlight

Port Configuration- 28 ports, includes 24 gigabit ports and 4 x 1G SFP ports
Power-Over-Ethernet- 24 PoE+ ports with 190W total power budget
Flexibility From Uplink Ports- 4 x 1G SFP ports
Advanced Configuration and Control- Management software with easy-to-use GUI interface offers refined control for secure setup, access, and SNMP (NMS 300) management.
Energy Efficient- Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode.
Built To Last- Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

TP-Link (TL-SG1024D) Switch – 24 Gigabit Ethernet Ports, Layer 2,Plug & Play

Rated 0 out of 5

(0)

Highlight

24 Gigabit Ethernet Ports.
Supports MAC address auto-learning and auto-aging
8K MAC address table, 12.8 Gbps switching capacity.
13-inch steel case, suitable for rack-mounting or desktop installation.
Plug and play design simplifies installation.
Fanless design ensures quiet operation.

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

TP-Link (TL-SG1024) Switch – 24 Gigabit Ethernet Ports, Unmanaged, Layer 2

Rated 0 out of 5

(0)

Highlight

The TL-SG1024 Gigabit Ethernet Switch provides you with a high-performance, low-cost, Easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network.
All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
Innovative energy-efficient technology saves power consumption
Supports MAC address self-learning and auto MDI/MDIX

Switches

NETGEAR Switch (GS716T) -16 x1 Gigabit Ethernet -2 SFP Fiber Ports

Rated 0 out of 5

(0)

Highlight

NETGEAR ProSafe GS716Tv2 – switch – 16 ports Device Type Switch Form Factor External – 1U Dimensions (WxDxH) 17.3 in x 10.2 in x 1.7 in Weight 5.7 lbs Localization North America Ports Qty 16 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T, Ethernet 1000Base-X Data Transfer Rate 1 Gbps Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet Empty Slots 2 x shared SFP (mini-GBIC) Remote Management Protocol SNMP 1, SNMP 3, SNMP 2c, HTTP, HTTPS Communication Mode Half-duplex, full-duplex Features Flow control, full duplex capability, auto-sensing per device, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, store and forward, SNTP support Compliant Standards IEEE 802.3u.