Only logged in customers who have purchased this product may leave a review.
Cisco 2960X 48Port 1G POE+ 740W 2Port SFP+ 10G + Cisco Router 2951
EGP13,500
📌Cisco 2960X 48Port 1G POE+ 740W – 2Port SFP+ 10G
▪48Port 1G POE+
▪2Port SFP+ 10G
▪740W
📌Cisco Router 2951
▪4 Voice FXO interfaces
Related products
Peplink Balance 380 Multi-WAN Router
- Up to 7 advanced load balancing for faster, more responsive networking
- Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
- Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
- IPsec/L2TP/PPTP VPN Functionality
- Advanced QoS Functionality
- IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices
Buffalo Business Switch ,16-port ,UnManaged ,Layer 2 Gigabit Switch
Buffalo’s unmanaged business-class 16-port gigabit switch offers a quick and easy way to extend your office network at fast gigabit Ethernet speeds.
– Fast and Easy Setup: Auto-MDIX provides fast plug and play setup with any Ethernet cable
– Forwarding Method is Store & Forward
– 1000Base-T/100BASE-TX/10BASE-T Auto-negotiation 16 ports
– Loop detection (buzzer and LED notification)
– Auto-Negotiation & Auto MDIX – simply plug in, no settings needed
– Full/Half-duplex auto-detect 1000/100/10Mbps – Silent and reliable fanless design
NEC QX-S1024GT-4G 24-Port Gigabit Ethernet Switch with Managed L2 Features, GUI Management, and Fanless Silent Design [Brand New, Packaging not included]
- Ease of use (WEB GUI or CLI)
- Fanless silent design
- Supports Energy Efficient Ethernet (EEE) function, which is an energy-saving function
- Achieves advanced QoS with 8-class priority control queue, bandwidth control, and PQ/WRR scheduling based on CoS/DSCP
- IEEE802.1X authentication/MAC address authentication prohibits communication from unauthorized terminals
- Supports IGMPv1/v2/v3 snooping as a multicast function
- Filtering by access control list (ACL) by MAC address, IP address, etc. is possible
- Supports link aggregation (LACP support), multi-port loop detection, and port mirroring functions
- SNMPv1/v2c/v3, alive monitoring by ping response is possible
- Supports management functions such as telnet/ssh/ftp/tftp/ntp client/syslog/web console
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
HPE OfficeConnect 1920 series (JG924a) Switch – 24 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Netgear M4300-28G – PoE+ – 24x1G, 2x10G BASE-T, 2xSFP+, Stackable, Layer 3 Managed Switches
- Expand your small to medium-sized business’s network capacity with the M4300-28G PoE+ 26-Port 1G/10G PoE+ Compliant Managed Network Switch from Netgear.
- This fully managed rackmount network switch includes Layer 2, 3, and 4 feature sets
- With 24 PoE+ you can provide power and data to IP cameras, access points, VoIP phones, and more.
- The M4300-28G-PoE+ provides 24 Gigabit PoE+ ports with 2 10GBASE-T and 2 10GBASE-X SFP+ uplink connectivity
- The (MM4300-28G) -PoE+ is designed to smoothly transfer data with a 128 Gb/s switching capacity and 95.2 Mpps forwarding rate.
- Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection.
Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply
- The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .
- It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.
- The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.
- The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.
- The switch also includes replaceable dual power supply units and a fan tray module.
Nexus (2232TM-E) Fabric Extender -10GBASE-T, 32x (1/10) GEBase-T + 8x10GE Module (SFP+), 2PS, 1 Fan Module, Cisco Parent Switches Cisco Nexus (5000, 6000, 7000, or n9000) Series
- Reduces data center cabling costs and footprint with optimized inter-rack cabling
- Unified fabric and FCoE at the server access layer reduce capital expenditure and operating expenses
- Virtual Port Channel (vPC) and in-service software upgrades (ISSU) Increase resilience
- Virtual machine aware network services facilitate quick expansion of network capacity
TP-Link (TL-SG1024) Switch – 24 Gigabit Ethernet Ports, Unmanaged, Layer 2
- The TL-SG1024 Gigabit Ethernet Switch provides you with a high-performance, low-cost, Easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network.
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Innovative energy-efficient technology saves power consumption
- Supports MAC address self-learning and auto MDI/MDIX
CISCO N5K-C5548UP-FA – Nexus 5548 UP
Cisco Nexus 5548UP. Switch type: Managed, Switch layer: L2/L3. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000), Basic switching RJ-45 Ethernet ports quantity: 32, Console port: RJ-45. MAC address table: 32000 entries. Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w,…. Rack mounting, Form factor: 1U
HPE OfficeConnect 1920 series (JG927a) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Cisco Catalyst 2970G-24T-E – 24 Gigabit Ethernet Ports- 4 * 1 GB SFP – Managed
- The Catalyst 2970 features robust security features, including port security, Access Control Lists (ACLs), and support for 802.1X authentication.
- It supports advanced Quality of Service (QoS) features to prioritize and manage network traffic based on application and user needs
- The switch supports multiple VLANs, enabling network administrators to segment traffic by department, function, or application.
Recently Viewed
HPE Proliant DL 360 G9 8 Bay 2.5 inch SFF
CPU : DUAL CPU Intel®️ Xeon®️ Processors E5- 2695 V3 (UpTo 3.30GHz)
▪Total cores 28 / Core Threads 56 / 70MB Cashe
▪MEMORY: 64GB DDR4 ECC
▪ Storage 8 * 1TB SAS Enterprise
▪ 4 Port Lan Ethernet 10/100/1000 RJ45
▪ Dual power supply
▪ 1 Year Warranty
HPE ProLiant ML350 Gen8 Tower Server, 2 x Intel Xeon E5-2651 v2 24 Cores / 48 Core Threads 1.8 GHz, 64 GB DDR3 RAM, H.D 5*1TB SAS 10K (New in box)
- Form Factor: Tower Server
- Processor Models: 2x Intel Xeon E5-2651 v2
- Max Cores: 24 Cores / 48 Core Threads – Total 60M Cache
- Total Memory: 64GB ECC DDR3
- Total Memory Slots: 24 DIMMs
- Storage: 5 x 1TB SAS 10K
- Assured Warranty
- Quick Shipping
- 24/7 Technical Support
Cisco 2960X 48Port 1G POE+ 740W 2Port SFP+ 10G + Cisco Router 2951
📌Cisco 2960X 48Port 1G POE+ 740W – 2Port SFP+ 10G
▪48Port 1G POE+
▪2Port SFP+ 10G
▪740W
📌Cisco Router 2951
▪4 Voice FXO interfaces
HPE Proliant DL 360 G9 8 Bay 2.5 inch SFF
CPU : DUAL CPU Intel®️ Xeon®️ Processors E5- 2687W V3 (UpTo 3.50GHz)
▪Total cores 20 / Core Threads 40 / 50MB Cashe
▪MEMORY: 16GB DDR4 ECC
▪ Storage 8 * 1TB SAS Enterprise
▪ 4 Port Lan Ethernet 10/100/1000 RJ45
▪ Dual power supply
▪ 1 Year Warranty
HPE Proliant DL 360 G9 V4
HPE Proliant DL 360 G9 V4
▪ Dual Processor Intel® Xeon® E5-2680 V3 ( Max Turbo Frequency 3.30 GHz )
▪ Total 24 Core / 48 Cores Threads / 60MB Cache.
▪ Memory : 32G -ECC – DDR4
▪ Raid Controller P440ar 2GB Flash-Backed Write Cache + Battery
▪ Storage : 4*3TB SAS Enterprise
▪ 4 Port Lan Ethernet 10/100/1000 RJ45
▪ Dual power supply
▪ 1 Year Warranty
Dell PowerEdge T430 Tower Server 16 Bay 2.5 inch💥
Dell PowerEdge T430 Tower Server 16 Bay 2.5 inch💥
▪ Intel Xeon Processor E5-1660 V4 ( Max Turbo Frequency 3.80 GHz )
▪ CPU 20 MB Cashe / 8 Cores / 16 Cores Therads
▪ Memory 64GB ECC DDR4
▪ STORAGE 6*1.2TB SAS Enterprise 12G
▪ RAID CONTROLLER PERC H730 + Battery
▪DUAL POWER SUPPLY 750 Watt Platinum Hot-Plug
▪🥇1 YEAR WARRANTY Including ALL PARTS🥇
DELL PowerEdge R540XD 14BAY 3.5 ( 🔥* New Version *🔥 )
📌DELL Power Edge R540XD 14BAY 3.5 ( 🔥* New Version *🔥 )
▪ CPU : DUAL Intel® Xeon® Platinum 8160 Processor
Max Turbo Frequency 3.70 GHz
▪ TOTAL CORE 48 / TOTAL CORES THREADS 96
▪ Memory : 256 GB DDR4 ECC ( 2666V )
▪RAID CONTROLLER PERC H330
▪ STORAGE : 10*4TB SAS (( 12G )) Enterprise
##🔥 Total 40TB 🔥##
▪NETWORK : ETHERNET RJ45
▪DUAL POWER SUPPLY 🔥1100W 🔥Platinum Hot-Plug
▪ 1 YEAR WARRANTY 🔝
Dell PowerEdge R640 – 8-Bay SFF 2.5” Rack Server
🕹️ Dell PowerEdge R640 – 8-Bay SFF 2.5” Rack Server 🕹️
🔸 Processors: Dual Intel® Xeon® Gold 6254
⚡ Max Turbo Frequency: 4.00 GHz
⚡ Total: 36 Cores / 72 Threads
🔸 Memory: 64GB DDR4 ECC (Scalable – ECC Supported)
🔸 RAID Controller: Dell PERC H730P RAID Controller – 2GB NV Cache
🔸 Storage: 8 × 1TB SAS (Enterprise)
🔸 Power Supply: Dual Hot-Plug Redundant 1100W PSUs
🔸 Warranty: 1-Year Full Hardware Warranty (Including PSU)
Dell PowerEdge T430 Tower Server 16 Bay 2.5 inch💥
Dell PowerEdge T430 Tower Server 16 Bay 2.5 inch💥
▪ Intel Xeon Processor E5-2699 V3 ( Max Turbo Frequency 3.60 GHz )
▪ CPU 45MB Cashe / 18 Cores / 36 Cores Therads
▪ Memory 64GB ECC DDR4
▪ STORAGE 8*1.2TB SAS Enterprise 12G
▪ RAID CONTROLLER PERC H730+ Battery
▪DUAL POWER SUPPLY 750 Watt Platinum Hot-Plug
▪🥇1 YEAR WARRANTY Including ALL PARTS
Dell PowerEdge R930 Rack Server 24 BAY 2.5″ SFF
Dell PowerEdge R930 Server delivers accelerate enterprise applications with Dell’s most powerful server featuring highly scalable processing, memory and internal storage. R930 supports Intel® Xeon® Processor E7-8800 Product Family and Intel® Xeon® Processor E7-4800 Product Family. It offers Up to 10 PCIe 3.0 slots, 1 RAID slot and 1 NDC slot with 4U rack chassis.
Reviews
There are no reviews yet.