Only logged in customers who have purchased this product may leave a review.
Cisco 2960X 48Port 1G POE+ 740W – 2Port SFP+ 10G
EGP12,500
48Port 1G POE+
2Port SFP+ 10G
Related products
Aruba S2500 Mobility Access Switch-24P-4x10G SFP+ POE
The S2500 Mobility Access Switch from Aruba Networks® extends role-based user access, security and operational simplicity to wired networks.
A vital part of Aruba Mobility-Defined NetworksTM, the S2500 delivers secure, virtualized access services to users, regardless of their location, access method, device or applications
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
HP J8693A Procurve 3500yl-48G-PWR Switch: 48 Gigabit Ports, 1U, PoE, L3/L4
HP J8693A Procurve 3500yl-48G-PWR switch is a 48-port Gigabit Ethernet switch with Power over Ethernet (PoE) capabilities, housed in a 1U form factor. It is a layer 3 (L3) and layer 4 (L4) switch, offering advanced routing and network management capabilities.
- 48 Gigabit Ethernet ports
- Power over Ethernet (PoE) capability
- 1U form factor for efficient use of rack space
- L3/L4 switching for advanced routing and network management
- Support for layer 3 static and RIP routing, and layer 4 access control lists (ACLs)
- Support for VLANs, QoS, and Link Aggregation Control Protocol (LACP)
- IPv6 support for future-proofing your network.
HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
CISCO N5K-C5548UP-FA – Nexus 5548 UP
Cisco Nexus 5548UP. Switch type: Managed, Switch layer: L2/L3. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000), Basic switching RJ-45 Ethernet ports quantity: 32, Console port: RJ-45. MAC address table: 32000 entries. Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w,…. Rack mounting, Form factor: 1U
ARUBA 7030 MOBILITY CONTROLLERS-8 Ports Combo (RJ-45&SFP) – 4096 Concurrent (Users/Devices) – Managed-1 U Rack-Mountable
- Branch and Remote Networking Requirements
- Zero-touch provisioning with limited IT assistance
- Secure access to corporate resources across the hybrid WAN
- Wireless and wired access for employees and guests
- WAN optimization and availability
- Policy-based routing and management
- Unified architecture across all locations
HP ProCurve 4208vl Switch – 140*1GbE Gigabit Ports – 28*1 GbE SFP – 7 Modulars ( J9033A)
- Layer 2 and Layer 3 lite feature set
- Scalable 10/100/1000 connectivity
- Uni-Directional Link Detection (UDLD)
- Layer 2 switching , Layer 3 routing
- Dynamic ARP protection
- Source-port filtering
- Multiple user authentication methods
HPE OfficeConnect 1920 series (JG924a) Switch – 24 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Brocade ICX 6610-48poe+, Switch-L3-Managed-48x 10/100/1000 + 8x SFP 10G + – Desktop, Rack Mountable
- Delivers chassis-level performance and availability, providing an optimal user experience for streaming video, Virtual Desktop Infrastructure (VDI), Unified Communications (UC), and other mission-critical campus applications
- Offers unprecedented stacking performance with 320 Gbps of stacking bandwidth
- Provides unmatched availability with four fully redundant 40 Gbps stacking ports per switch, hitless stacking failover, hot switch replacement, and dual hot-swappable power supplies and fan assemblies
- Simplifies network operations and protects investments with Brocade HyperEdge™ technology
HP 850 Unified Wired-WLAN Appliance, L2/L3/L4 Managed, 8*1GbE (RJ-45)-8*1GbE (SFP)-2*10GB SFP+
- Scalable capacity, performance, and high reliability for medium Enterprise wireless networks
- System-wide approach to WLAN reliability through Wi-Fi Clear Connect
- The HPE 850 Unified Wired-WLAN Appliance provides eight 1000 Mbps Ethernet ports and two 10GbE ports
- Flexible forwarding modes
- Comprehensive feature set for demanding Enterprise environments
Nexus 2232PP Fabric Extender – 32x (1/10) GE (SFP/SFP+) + 8x10GE (SFP+) Module, 2PS, 1 Fan Module, Cisco parent switches Cisco Nexus (5000, 6000, 7000, or n9000) Series
- Reduces data center cabling costs and footprint with optimized inter-rack cabling
- Unified fabric and FCoE at the server access layer reduce capital expenditure and operating expenses
- Virtual Port Channel (vPC) and in-service software upgrades (ISSU) Increase resilience
- Virtual machine aware network services facilitate quick expansion of network capacity
Reviews
There are no reviews yet.