Only logged in customers who have purchased this product may leave a review.
Cisco Catalyst 3650 48-Port POE+ 4x1G SFP Uplink Power supply 1025W
48 port POE+
4port SFP
Power supply 1025W
With Rackmounts
Related products
NETGEAR Switch ( GS728TP) -24 x 1 Gigabit Ethernet POE
- Port Configuration- 28 ports, includes 24 gigabit ports and 4 x 1G SFP ports
- Power-Over-Ethernet- 24 PoE+ ports with 190W total power budget
- Flexibility From Uplink Ports- 4 x 1G SFP ports
- Advanced Configuration and Control- Management software with easy-to-use GUI interface offers refined control for secure setup, access, and SNMP (NMS 300) management.
- Energy Efficient- Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode.
- Built To Last- Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance
Lenovo RackSwitch G8332 – 32 * 40 Gigabit (QSFP+), 2.56 Tbps throughput, Full-featured L2 and L3, Managed
- Lenovo RackSwitch G8332 is a 1U rack-mountable aggregation switch used for combining traffic from multiple high-speed server racks. It has 32 QSFP+ ports,
- Ultra-low latency and 2.56 Tbps throughput. It is an enterprise-class, full-featured L2 and L3 data center switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data.
- It supports 10 Gigabit Ethernet, 40 Gigabit Ethernet, Converged Enhanced Ethernet (CEE/DCB), and iSCSI configurations.
- The switch uses a wire-speed, non-blocking switching fabric that provides simultaneous wire-speed transport of multiple packets at low latency on all ports.
- The switch has exceptional port density and flexibility with break-out cables, and can support up to 96x 10 Gigabit Ethernet connections and still have 8x 40 Gigabit Ethernet uplinks.
HP A5120 EI Switch Series (JG245A), Layer 3, Managed Gigabit Ethernet switch with 24 10/100/1000 BaseT ports (NEW)
- Provides Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.
- Offers high scalability with two expansion slots that can support two-port 10GbE expansion modules.
- Features Unique Intelligent Resilient Framework (IRF) technology for creating virtual fabrics by virtualizing multiple switches into a single logical device.
- Provides high availability, simplified management, and comprehensive security
TP-Link (TL-SG1024D) Switch – 24 Gigabit Ethernet Ports, Layer 2,Plug & Play
- 24 Gigabit Ethernet Ports.
- Supports MAC address auto-learning and auto-aging
- 8K MAC address table, 12.8 Gbps switching capacity.
- 13-inch steel case, suitable for rack-mounting or desktop installation.
- Plug and play design simplifies installation.
- Fanless design ensures quiet operation.
Dell Power Connect (2748) – 48 x 1 Gigabit Ethernet – 2 SFP
- Ideal for Small Office or Home Office
- Primary use to connect workstations and other network devices
- 48 Ports Gigabit Speeds
- 4 SFP Combo Ports
- VLAN Support
- Quality of Service (QoS)
- Rack Mountable
- Metal Chassis
- Web Browser Managed
- Managed / Unmanaged / Secured Modes
- Back Pressure Support
- Status Indicators (link activity, port transmission speed, Power, link OK)
Cisco Catalyst 2970G-24T-E – 24 Gigabit Ethernet Ports- 4 * 1 GB SFP – Managed
- The Catalyst 2970 features robust security features, including port security, Access Control Lists (ACLs), and support for 802.1X authentication.
- It supports advanced Quality of Service (QoS) features to prioritize and manage network traffic based on application and user needs
- The switch supports multiple VLANs, enabling network administrators to segment traffic by department, function, or application.
TP-Link (TL-SG1024) Switch – 24 Gigabit Ethernet Ports, Unmanaged, Layer 2
- The TL-SG1024 Gigabit Ethernet Switch provides you with a high-performance, low-cost, Easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network.
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Innovative energy-efficient technology saves power consumption
- Supports MAC address self-learning and auto MDI/MDIX
HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Lenovo RackSwitch G8272 – 48x10Gb (SFP/SFP+) Ports – 6x40Gb(QSFP+) Ports – Layer 3 – Managed – Dual Power supply – Rear-to-Front Airflow
- The Enterprise NOS (ENOS) has a feature-rich design with virtualization, high availability, and enterprise class Layer 2 and Layer 3 functionality.
- It supports Network virtualization VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.
- Advanced Layer 2/3/4 switching and routing capabilities, including Virtual Router Redundancy Protocol (VRRP), Border Gateway Protocol (BGP), and Equal-Cost Multipath (ECMP)
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- Support for OpenFlow 1.3 and 1.4 for software-defined networking (SDN) applications
- Hot-swappable power supplies and fan modules for high availability and easy maintenance
HP ProCurve 1400-24G (J9078A)- Gigabit Ethernet
The HP 1400-24G (J9078A) is a 24 port Ethernet switch designed to be as simple as possible. The J9078A switch is an “unmanaged” switch meaning it auto-configures itself for you. The HP 1400-24G was designed without fans making it one of the quietest switches available. The J9078A is the perfect choice for those lacking a dedicated server room.
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
3Com Switch 2824 (CBlUG24)- 24 x 1Gigabit Ethernet
24 autosensing 10/100/1000 Ethernet Standards conformance: ISO 8802-3, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.1d (bridging), IEEE 802.3x (flow control), IEEE 802.3ab (Gigabit Ethernet) Media interfaces: 10/100/1000BASE-TX/RJ-45 Switching features: Store-and-forward; full-/half-duplex auto-negotiation; Class-of-Service (CoS) 802.1p traffic prioritization (priority queuing) MAC addresses: 32,000 LED indicators: Power, network traffic/duplex mode, link status/speed Electrical power: Power inlet: IEC 320 AC line frequency: 50/60 Hz Input voltage: 100-240 VAC Current rating: 1A, max Maximum power consumption: 21W Maximum power




















Reviews
There are no reviews yet.