Cisco Catalyst 3750X – 48Port 1G POE+ – 2Port SFP+ 10G – 2Port SFP 1G

SKU: 4904 Category: Switches Tags: 1G, 24Port, 2960X, 4Port SFP+, cisco Brand: Cisco

Reviews (0)

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Lenovo RackSwitch G8332 – 32 * 40 Gigabit (QSFP+), 2.56 Tbps throughput, Full-featured L2 and L3, Managed

Rated 0 out of 5

(0)

Highlight

Lenovo RackSwitch G8332 is a 1U rack-mountable aggregation switch used for combining traffic from multiple high-speed server racks. It has 32 QSFP+ ports,
Ultra-low latency and 2.56 Tbps throughput. It is an enterprise-class, full-featured L2 and L3 data center switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data.
It supports 10 Gigabit Ethernet, 40 Gigabit Ethernet, Converged Enhanced Ethernet (CEE/DCB), and iSCSI configurations.
The switch uses a wire-speed, non-blocking switching fabric that provides simultaneous wire-speed transport of multiple packets at low latency on all ports.
The switch has exceptional port density and flexibility with break-out cables, and can support up to 96x 10 Gigabit Ethernet connections and still have 8x 40 Gigabit Ethernet uplinks.

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

Dell Switch (5424) -24 x 1 Gigabit Ethernet

Rated 0 out of 5

(0)

Highlight

24 10/100/1000BASE-T auto-sensing Gigabit Ethernet switching ports
4 SFP combo slots for fiber media support (Note: SFP slots are used instead of the built-in 10/100/1000BaseT ports)
Auto-negotiation for speed, duplex mode and flow control
Auto MDI/MDIX Port mirroring Broadcast storm control
Switch Fabric Capacity 48.0 Gbps
Forwarding Rate 35.6 Mpps
Up to 8,000 MAC Addresses

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

TP-Link (TL-SG1024D) Switch – 24 Gigabit Ethernet Ports, Layer 2,Plug & Play

Rated 0 out of 5

(0)

Highlight

24 Gigabit Ethernet Ports.
Supports MAC address auto-learning and auto-aging
8K MAC address table, 12.8 Gbps switching capacity.
13-inch steel case, suitable for rack-mounting or desktop installation.
Plug and play design simplifies installation.
Fanless design ensures quiet operation.

Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)

Rated 0 out of 5

(0)

Highlight

It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

TP-Link (TL-SG1024) Switch – 24 Gigabit Ethernet Ports, Unmanaged, Layer 2

Rated 0 out of 5

(0)

Highlight

The TL-SG1024 Gigabit Ethernet Switch provides you with a high-performance, low-cost, Easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network.
All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
Innovative energy-efficient technology saves power consumption
Supports MAC address self-learning and auto MDI/MDIX

Switches, 1G Non-PoE, 48 Port 1G Non PoE, Ethernet Switches, Non PoE

HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing

Rated 0 out of 5

(0)

Highlight

Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
Layer 3 static routing with 32 routes for network segmentation and expansion

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

HPE OfficeConnect 1920s Series (JL381A) Switch – 24 Gigabit Ports – 2*1Gb SFP– Layer 2

Rated 0 out of 5

(0)

Highlight

The HP OfficeConnect 1920S Series (JL381A) is a smart-managed Layer 2 switch designed for small and medium-sized businesses.
The JL381A switch is designed to deliver wire-speed gigabit Ethernet connectivity with up to 80 Gbps switching capacity and up to 59.5 Mpps throughput.
The switch supports both web-based and command-line interface (CLI) management, as well as SNMP, RMON, and LLDP protocols for network monitoring and control.
The switch provides advanced security features such as Access Control Lists (ACLs), 802.1X port authentication, and MAC-based authentication to protect the network from unauthorized access and attacks.

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

DrayTek Vigor Switch (G1240) 24-Port Switch 24 x 1 Gigabit Ethernet Ports

Rated 0 out of 5

(0)

Highlight

4 SFP (Fiber Module) Ports
-ort Based and 802.1q VLAN
Auto-Negotiation, Auto-MDIX
Flow Control: Back pressure for Half-Duplex
802.3x Pause Frame for Full-Duplex
Switch Fabric: 48Gbps / non-blocking
Wire speed performance
Mac Address: 8 K MAC address table
Package buffer memory: 500K Bytes
Jumbo frame support to 9600 bytes

Switches, 1G PoE, 48 Port 1G PoE, Ethernet Switches, PoE, Uplink 10G | 48 Port 1G PoE

Brocade ICX 6610-48poe+, Switch-L3-Managed-48x 10/100/1000 + 8x SFP 10G + – Desktop, Rack Mountable

Rated 0 out of 5

(0)

Highlight

Delivers chassis-level performance and availability, providing an optimal user experience for streaming video, Virtual Desktop Infrastructure (VDI), Unified Communications (UC), and other mission-critical campus applications
Offers unprecedented stacking performance with 320 Gbps of stacking bandwidth
Provides unmatched availability with four fully redundant 40 Gbps stacking ports per switch, hitless stacking failover, hot switch replacement, and dual hot-swappable power supplies and fan assemblies
Simplifies network operations and protects investments with Brocade HyperEdge™ technology

Lenovo RackSwitch NE10032 – 32 Ports of 40GbE or 100GbE ( QSFP+/QSFP28) – Layer 3 – Managed

Rated 0 out of 5

(0)

Highlight

Cloud and virtualization solutions with VM-aware network automation and integration into Lenovo and third-party IT and cloud infrastructure management tools

The 10 Gb/25 Gb/40 Gb/100 Gb Ethernet NE10032 RackSwitch provides a combination of low latency, non-blocking line-rate switching, and ease of management with 6.4 Tbps throughput.

The NE10032 RackSwitch includes Layer 3 functionality, which provides security and performance benefits, as inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers

The NE10032 switch supports VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

3Com Switch 2824 (CBlUG24)- 24 x 1Gigabit Ethernet

Rated 0 out of 5

(0)

Highlight

24 autosensing 10/100/1000 Ethernet Standards conformance: ISO 8802-3, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.1d (bridging), IEEE 802.3x (flow control), IEEE 802.3ab (Gigabit Ethernet) Media interfaces: 10/100/1000BASE-TX/RJ-45 Switching features: Store-and-forward; full-/half-duplex auto-negotiation; Class-of-Service (CoS) 802.1p traffic prioritization (priority queuing) MAC addresses: 32,000 LED indicators: Power, network traffic/duplex mode, link status/speed Electrical power: Power inlet: IEC 320 AC line frequency: 50/60 Hz Input voltage: 100-240 VAC Current rating: 1A, max Maximum power consumption: 21W Maximum power

Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply

Rated 0 out of 5

(0)

Highlight

The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .

It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.

The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.

The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.

The switch also includes replaceable dual power supply units and a fan tray module.