Cisco Catalyst 3850 24P 1G PoE+ Uplink 10G + Cisco Firewall 5515-X

SKU: 16319 Categories: Switches, 24 Port 1G PoE, Ethernet Switches, Network Firewalls, PoE, Uplink 10G | 24 Port 1G PoE Brand: Cisco

Reviews (0)

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

NEC QX-S1024GT-4G 24-Port Gigabit Ethernet Switch with Managed L2 Features, GUI Management, and Fanless Silent Design [Brand New, Packaging not included]

Rated 0 out of 5

(0)

Highlight

Ease of use (WEB GUI or CLI)
Fanless silent design
Supports Energy Efficient Ethernet (EEE) function, which is an energy-saving function
Achieves advanced QoS with 8-class priority control queue, bandwidth control, and PQ/WRR scheduling based on CoS/DSCP
IEEE802.1X authentication/MAC address authentication prohibits communication from unauthorized terminals
Supports IGMPv1/v2/v3 snooping as a multicast function
Filtering by access control list (ACL) by MAC address, IP address, etc. is possible
Supports link aggregation (LACP support), multi-port loop detection, and port mirroring functions
SNMPv1/v2c/v3, alive monitoring by ping response is possible
Supports management functions such as telnet/ssh/ftp/tftp/ntp client/syslog/web console

Switches, 1G Non-PoE, 48 Port 1G Non PoE, Ethernet Switches, Non PoE

HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing

Rated 0 out of 5

(0)

Highlight

Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
Layer 3 static routing with 32 routes for network segmentation and expansion

Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)

Rated 0 out of 5

(0)

Highlight

It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports

Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply

Rated 0 out of 5

(0)

Highlight

The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .

It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.

The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.

The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.

The switch also includes replaceable dual power supply units and a fan tray module.

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

Cisco Catalyst 2970G-24T-E – 24 Gigabit Ethernet Ports- 4 * 1 GB SFP – Managed

Rated 0 out of 5

(0)

Highlight

The Catalyst 2970 features robust security features, including port security, Access Control Lists (ACLs), and support for 802.1X authentication.
It supports advanced Quality of Service (QoS) features to prioritize and manage network traffic based on application and user needs
The switch supports multiple VLANs, enabling network administrators to segment traffic by department, function, or application.

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

HP ProCurve 1400-24G (J9078A)- Gigabit Ethernet

Rated 0 out of 5

(0)

Highlight

The HP 1400-24G (J9078A) is a 24 port Ethernet switch designed to be as simple as possible. The J9078A switch is an “unmanaged” switch meaning it auto-configures itself for you. The HP 1400-24G was designed without fans making it one of the quietest switches available. The J9078A is the perfect choice for those lacking a dedicated server room.

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

DrayTek Vigor Switch (G1240) 24-Port Switch 24 x 1 Gigabit Ethernet Ports

Rated 0 out of 5

(0)

Highlight

4 SFP (Fiber Module) Ports
-ort Based and 802.1q VLAN
Auto-Negotiation, Auto-MDIX
Flow Control: Back pressure for Half-Duplex
802.3x Pause Frame for Full-Duplex
Switch Fabric: 48Gbps / non-blocking
Wire speed performance
Mac Address: 8 K MAC address table
Package buffer memory: 500K Bytes
Jumbo frame support to 9600 bytes

Lenovo RackSwitch G8332 – 32 * 40 Gigabit (QSFP+), 2.56 Tbps throughput, Full-featured L2 and L3, Managed

Rated 0 out of 5

(0)

Highlight

Lenovo RackSwitch G8332 is a 1U rack-mountable aggregation switch used for combining traffic from multiple high-speed server racks. It has 32 QSFP+ ports,
Ultra-low latency and 2.56 Tbps throughput. It is an enterprise-class, full-featured L2 and L3 data center switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data.
It supports 10 Gigabit Ethernet, 40 Gigabit Ethernet, Converged Enhanced Ethernet (CEE/DCB), and iSCSI configurations.
The switch uses a wire-speed, non-blocking switching fabric that provides simultaneous wire-speed transport of multiple packets at low latency on all ports.
The switch has exceptional port density and flexibility with break-out cables, and can support up to 96x 10 Gigabit Ethernet connections and still have 8x 40 Gigabit Ethernet uplinks.

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

HP A5120 EI Switch Series (JG245A), Layer 3, Managed Gigabit Ethernet switch with 24 10/100/1000 BaseT ports (NEW)

Rated 0 out of 5

(0)

Highlight

Provides Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.
Offers high scalability with two expansion slots that can support two-port 10GbE expansion modules.
Features Unique Intelligent Resilient Framework (IRF) technology for creating virtual fabrics by virtualizing multiple switches into a single logical device.
Provides high availability, simplified management, and comprehensive security

Lenovo RackSwitch NE10032 – 32 Ports of 40GbE or 100GbE ( QSFP+/QSFP28) – Layer 3 – Managed

Rated 0 out of 5

(0)

Highlight

Cloud and virtualization solutions with VM-aware network automation and integration into Lenovo and third-party IT and cloud infrastructure management tools

The 10 Gb/25 Gb/40 Gb/100 Gb Ethernet NE10032 RackSwitch provides a combination of low latency, non-blocking line-rate switching, and ease of management with 6.4 Tbps throughput.

The NE10032 RackSwitch includes Layer 3 functionality, which provides security and performance benefits, as inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers

The NE10032 switch supports VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

HPE OfficeConnect 1920s Series (JL381A) Switch – 24 Gigabit Ports – 2*1Gb SFP– Layer 2

Rated 0 out of 5

(0)

Highlight

The HP OfficeConnect 1920S Series (JL381A) is a smart-managed Layer 2 switch designed for small and medium-sized businesses.
The JL381A switch is designed to deliver wire-speed gigabit Ethernet connectivity with up to 80 Gbps switching capacity and up to 59.5 Mpps throughput.
The switch supports both web-based and command-line interface (CLI) management, as well as SNMP, RMON, and LLDP protocols for network monitoring and control.
The switch provides advanced security features such as Access Control Lists (ACLs), 802.1X port authentication, and MAC-based authentication to protect the network from unauthorized access and attacks.

Switches, 1G PoE, 48 Port 1G PoE, Ethernet Switches, PoE, Uplink 10G | 48 Port 1G PoE

HP 5500 series Switch (JG542A) -POE+ – L3-Managed – 481GB Ethernet Ports-41GB SFP 2*10GB SFP+ – Dual Power Supply

Rated 0 out of 5

(0)

Highlight

The HP 5500 series switch delivers unrivaled resiliency, security, and multi-service capabilities at the edge of branch and large campus networks
48 auto-sensing GigabitEthernet PoE+ ports
4 fixed GbE SFP ports, 2* 10GbE SFP+ ports
1 GB SDRAM, Packet buffer capacity: 6 MB and 512 MB flash
224 Gb/s routing/switching performance
Stacking capability – IRF, 9 switches