Only logged in customers who have purchased this product may leave a review.
Cisco catalyst 3850 48P 1G ( POE+ ) +Cisco router 2951
📌Cisco Catalyst 3850 48P PoE+ Uplink 1G
◾48Port 1G PoE+
◾Layer 3 Switch
◾Web interface
◾Power Supply 1100W
◾Stackable switch
🔺With Rackmounts
📌Cisco Router 2951
▪4 Voice FXO interfaces
Related products
TP-Link (TL-SG1016 PE) Switch – 16 Gigabit Ethernet Ports , 8 Port (PoE+), Layer 2
- The TP-Link (TL-SG1016 PE) switch provides 16 Gigabit Ethernet ports, with PoE+ support on 8 of its ports.
- The PoE+ ports can provide up to 30 watts of power each, which is sufficient for most PoE-enabled devices.
- The switch supports VLANs, LACP, and STP, providing advanced networking features for network aggregation, improved performance, and loop prevention.
- The switch’s Energy-efficient Ethernet (EEE) compliance helps to reduce power consumption and operating costs.
NETGEAR Switch ProSafe (GSM 7224)-24 x1Gigabit Ethernet -Layer 2 Switch
- The Netgear GSM7224 is in the ProSafe family of Netgear switches, providing enterprise-class performance and reliability at an affordable price. The Netgear switch has twenty-four Gigabit Ethernet ports (10/100/1000 Mbps) as well as four SFP combo ports. The combo ports are used for stacking and linking additional equipment, allowing your network to grow as your business does. Popular features of the GSM7224 ProSafe switch are VLAN support, Layer 2, managed, Quality of Service
- 24 Ports ,Gigabit Ethernet
- 4 SFP Combo Ports
- Layer 2, Managed
- Quality of Service (QoS),VLAN Support
- 48 Gbps Non-Blocking Bandwidth
- Telnet Remote Management
HP ProCurve 1400-24G (J9078A)- Gigabit Ethernet
The HP 1400-24G (J9078A) is a 24 port Ethernet switch designed to be as simple as possible. The J9078A switch is an “unmanaged” switch meaning it auto-configures itself for you. The HP 1400-24G was designed without fans making it one of the quietest switches available. The J9078A is the perfect choice for those lacking a dedicated server room.
DrayTek Vigor Switch (G1240) 24-Port Switch 24 x 1 Gigabit Ethernet Ports
- 4 SFP (Fiber Module) Ports
- -ort Based and 802.1q VLAN
- Auto-Negotiation, Auto-MDIX
- Flow Control: Back pressure for Half-Duplex
- 802.3x Pause Frame for Full-Duplex
- Switch Fabric: 48Gbps / non-blocking
- Wire speed performance
- Mac Address: 8 K MAC address table
- Package buffer memory: 500K Bytes
- Jumbo frame support to 9600 bytes
Lenovo RackSwitch G8272 – 48x10Gb (SFP/SFP+) Ports – 6x40Gb(QSFP+) Ports – Layer 3 – Managed – Dual Power supply – Rear-to-Front Airflow
- The Enterprise NOS (ENOS) has a feature-rich design with virtualization, high availability, and enterprise class Layer 2 and Layer 3 functionality.
- It supports Network virtualization VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.
- Advanced Layer 2/3/4 switching and routing capabilities, including Virtual Router Redundancy Protocol (VRRP), Border Gateway Protocol (BGP), and Equal-Cost Multipath (ECMP)
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- Support for OpenFlow 1.3 and 1.4 for software-defined networking (SDN) applications
- Hot-swappable power supplies and fan modules for high availability and easy maintenance
TP-Link (TL-SG1024) Switch – 24 Gigabit Ethernet Ports, Unmanaged, Layer 2
- The TL-SG1024 Gigabit Ethernet Switch provides you with a high-performance, low-cost, Easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network.
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Innovative energy-efficient technology saves power consumption
- Supports MAC address self-learning and auto MDI/MDIX
HP A5120 EI Switch Series (JG245A), Layer 3, Managed Gigabit Ethernet switch with 24 10/100/1000 BaseT ports (NEW)
- Provides Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.
- Offers high scalability with two expansion slots that can support two-port 10GbE expansion modules.
- Features Unique Intelligent Resilient Framework (IRF) technology for creating virtual fabrics by virtualizing multiple switches into a single logical device.
- Provides high availability, simplified management, and comprehensive security
Lenovo RackSwitch G8332 – 32 * 40 Gigabit (QSFP+), 2.56 Tbps throughput, Full-featured L2 and L3, Managed
- Lenovo RackSwitch G8332 is a 1U rack-mountable aggregation switch used for combining traffic from multiple high-speed server racks. It has 32 QSFP+ ports,
- Ultra-low latency and 2.56 Tbps throughput. It is an enterprise-class, full-featured L2 and L3 data center switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data.
- It supports 10 Gigabit Ethernet, 40 Gigabit Ethernet, Converged Enhanced Ethernet (CEE/DCB), and iSCSI configurations.
- The switch uses a wire-speed, non-blocking switching fabric that provides simultaneous wire-speed transport of multiple packets at low latency on all ports.
- The switch has exceptional port density and flexibility with break-out cables, and can support up to 96x 10 Gigabit Ethernet connections and still have 8x 40 Gigabit Ethernet uplinks.
HP 5500 series Switch (JG542A) -POE+ – L3-Managed – 48*1GB Ethernet Ports-4*1GB SFP 2*10GB SFP+ – Dual Power Supply
- The HP 5500 series switch delivers unrivaled resiliency, security, and multi-service capabilities at the edge of branch and large campus networks
- 48 auto-sensing GigabitEthernet PoE+ ports
- 4 fixed GbE SFP ports, 2* 10GbE SFP+ ports
- 1 GB SDRAM, Packet buffer capacity: 6 MB and 512 MB flash
- 224 Gb/s routing/switching performance
- Stacking capability – IRF, 9 switches
HP V1910-24G POE (JE007A) Switch – 24 Gigabit Ethernet Ports – 4 SFP – Layer 3 Static Routing
- The HP V1910-24G switch is a powerful networking device that offers 24 Gigabit Ethernet ports for fast and reliable connectivity.
- The switch also supports Layer 3 static routing, which allows you to route traffic between different networks and subnets.
- Web-based management and a command-line interface (CLI) make it easy to configure and manage the switch.
- With support for VLANs, LACP, and STP, this switch provides advanced networking features to help you manage your network more efficiently.
HP StorageWorks 8/20q Fibre Channel Switch-20*8Gb FC-1 U- (AK241)
- 20 x 8Gb Fibre Channel Ports
- Hot-swappable 8 Gbps SFP optical transceivers
- Non-Disruptive Code Load and Activation (NDCLA)
- Drag-and-drop zoning
- Adaptive trunking, intelligent path selection
- It allows the user to view two saved configurations and compare the differences
- Transparent Routing (TR) technology – Seamless operation: HP B and C-series SANs
- Integrated end-to-end management-server to storage
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
Recently Viewed
Cisco Catalyst 3650 48P 1G UPoE Uplink 10G
◾48Port 1G UPoE
◾12 Port RJ45 10G
◾Uplink 4port SFP+10G
◾Layer 3 Switch
◾ Power Supply 1025W
🔺With Rackmount
Cisco catalyst 3850 48P 1G ( POE+ ) +Cisco router 2951
📌Cisco Catalyst 3850 48P PoE+ Uplink 1G
◾48Port 1G PoE+
◾Layer 3 Switch
◾Web interface
◾Power Supply 1100W
◾Stackable switch
🔺With Rackmounts
📌Cisco Router 2951
▪4 Voice FXO interfaces
Cisco 3650 48P 1G PoE+ & Cisco Router 2951
📌Cisco Catalyst 3650 48P PoE+ Uplink 1G
◾48Port 1G PoE+
◾Uplink 1G
◾Layer 3 Switch
◾Power Supply 1025W
🔺With Rackmounts
_______________________
📌Cisco Router 2951
PVDM2 – 64 VO1
▪VlC2-4FXO
▪VWIC3-2MFT-T1/E1
▪VWIC2-2MFT-T1/E1
▪ VIC3-2E/M
_______________________
📌4 Gbics 1G
Cisco Catalyst 3650 24P 1G PoE+ Uplink 10G
◾48Port 1G PoE+
◾Uplink SFP+ 10G
◾Layer 3 Switch
🔺With Rackmount






















Reviews
There are no reviews yet.