Only logged in customers who have purchased this product may leave a review.
Cisco Catalyst 3850 48P 1G POE+ Uplink 10G With 4Gibic Cisco 10G
In Stock
Highlight
Compare
◾48Port 1G POE+
◾Uplink 10G
◾Layer 3 Switch
◾Web interface
◾Power Supply 1100W
◾Stackable switch
🔺With Rackmounts
🔺With 4GBIC CISCO 10G
SKU: 19547
Categories: Switches, 1G PoE, Ethernet Switches, PoE, Uplink 10G | 48 Port 1G PoE
Brand: Cisco
Related products
Tripp Lite Auto-Transfer Switch PDU
Rated 0 out of 5
(0)
Highlight
Tripp Lite’s Auto-Transfer Switch PDU (Power Distribution Unit) automatically switches to a secondary power source in the event of a primary power failure. This ensures continuous, uninterruptible power to connected equipment and can help prevent data loss and equipment damage. This PDU can be used in a variety of settings, including data centers, server rooms, and network closets.
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
Rated 0 out of 5
(0)
Highlight
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply
Rated 0 out of 5
(0)
Highlight
- The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .
- It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.
- The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.
- The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.
- The switch also includes replaceable dual power supply units and a fan tray module.
Nexus 2232PP Fabric Extender – 32x (1/10) GE (SFP/SFP+) + 8x10GE (SFP+) Module, 2PS, 1 Fan Module, Cisco parent switches Cisco Nexus (5000, 6000, 7000, or n9000) Series
Rated 0 out of 5
(0)
Highlight
- Reduces data center cabling costs and footprint with optimized inter-rack cabling
- Unified fabric and FCoE at the server access layer reduce capital expenditure and operating expenses
- Virtual Port Channel (vPC) and in-service software upgrades (ISSU) Increase resilience
- Virtual machine aware network services facilitate quick expansion of network capacity
HP J8693A Procurve 3500yl-48G-PWR Switch: 48 Gigabit Ports, 1U, PoE, L3/L4
Rated 0 out of 5
(0)
Highlight
HP J8693A Procurve 3500yl-48G-PWR switch is a 48-port Gigabit Ethernet switch with Power over Ethernet (PoE) capabilities, housed in a 1U form factor. It is a layer 3 (L3) and layer 4 (L4) switch, offering advanced routing and network management capabilities.
- 48 Gigabit Ethernet ports
- Power over Ethernet (PoE) capability
- 1U form factor for efficient use of rack space
- L3/L4 switching for advanced routing and network management
- Support for layer 3 static and RIP routing, and layer 4 access control lists (ACLs)
- Support for VLANs, QoS, and Link Aggregation Control Protocol (LACP)
- IPv6 support for future-proofing your network.
HPE FlexNetwork 5130 JH325A – L3 – Managed – 24 Ports PoE+ 4x 10G SFP+
Rated 0 out of 5
(0)
Highlight
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports
- Fixed 10GbE ports for high-speed stacking or uplinks
- Provide higher efficiency in IP phone, wireless access point
- Support for multiple services
- Comprehensive security control policies
- Diversified quality of service (QoS) policies
- Excellent manageability
F5 (BIG-IP-1600) Series -4*1Gigabit Ethernet Ports- 2*1GB SFP- 4GB RAM – Dual Core Processor
Rated 0 out of 5
(0)
Highlight
- F5 BIG-IP 1600 Global Traffic Manager (GTM) distributes DNS and user application requests based on business policies, data center and network conditions
- BIG-IP GTM delivers F5’s high-performance DNS Services with visibility, reporting, and analysis
- Scales and secures DNS responses geographically to survive DDoS attacks; delivers a complete, real-time DNSSEC solution
ARUBA 7030 MOBILITY CONTROLLERS-8 Ports Combo (RJ-45&SFP) – 4096 Concurrent (Users/Devices) – Managed-1 U Rack-Mountable
Rated 0 out of 5
(0)
Highlight
- Branch and Remote Networking Requirements
- Zero-touch provisioning with limited IT assistance
- Secure access to corporate resources across the hybrid WAN
- Wireless and wired access for employees and guests
- WAN optimization and availability
- Policy-based routing and management
- Unified architecture across all locations
Juniper EX4200 Series 48Port POE L3/L4 Managed Switch
Rated 0 out of 5
(0)
Highlight
– 48*1Gbps include 8 ports power over Ethernet
– (2-port *10GbE SFP / 2-port *1GbE SFP) Uplink Module
– Supported web GUI management
– Dual Power supply
Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE
HPE OfficeConnect 1920 series (JG924a) Switch – 24 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
Rated 0 out of 5
(0)
Highlight
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Peplink Balance 380 Multi-WAN Router
Rated 0 out of 5
(0)
Highlight
- Up to 7 advanced load balancing for faster, more responsive networking
- Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
- Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
- IPsec/L2TP/PPTP VPN Functionality
- Advanced QoS Functionality
- IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices
Nexus (2232TM-E) Fabric Extender -10GBASE-T, 32x (1/10) GEBase-T + 8x10GE Module (SFP+), 2PS, 1 Fan Module, Cisco Parent Switches Cisco Nexus (5000, 6000, 7000, or n9000) Series
Rated 0 out of 5
(0)
Highlight
- Reduces data center cabling costs and footprint with optimized inter-rack cabling
- Unified fabric and FCoE at the server access layer reduce capital expenditure and operating expenses
- Virtual Port Channel (vPC) and in-service software upgrades (ISSU) Increase resilience
- Virtual machine aware network services facilitate quick expansion of network capacity
Recently Viewed
O-Net 12M -100G QSFP28 AOC Optical Cable
Rated 0 out of 5
(0)
Highlight
Data Rate: 100Gbps
Connector Type: QSFP28 AOC
Cable Length: 12M
Cisco Catalyst 3850 48P 1G POE+ Uplink 10G With 4Gibic Cisco 10G
Rated 0 out of 5
(0)
Highlight
◾48Port 1G POE+
◾Uplink 10G
◾Layer 3 Switch
◾Web interface
◾Power Supply 1100W
◾Stackable switch
🔺With Rackmounts
🔺With 4GBIC CISCO 10G
SuperMicro TwinPro (2U Twin architecture with 2 Node ) 24Bay 2.5 inch
Rated 0 out of 5
(0)
Highlight
DUAL 1280W Redundant Power Supplies
* Each Server Includes *
– Dual Intel® Xeon® E5-2673 v4
– Total Cores 40/ Therads 80/ Cashe 100MB
– Memory: 32 GB DDR4 ECC
-STORAGE : 5 * 1.2TB SAS 2.5 10K
* RAID CONTROLLER Support Levels (0 ,1 , 5 , 10 , 50 , 60)
– IPMI
* Support for Intelligent Platform Management Interface
* BMC with virtual media over LAN and KVM-over-LAN support
– Network
* Dual Port Gigabit Ethernet
SuperMicro TwinPro (2U Twin architecture with 2 Node ) 24Bay 2.5 inch
Rated 0 out of 5
(0)
Highlight
DUAL 1280W Redundant Power Supplies
* Each Server Includes *
– Dual Intel® Xeon® E5-2660 v4
– Total Cores 28/ Therads 56/ Cashe 70MB
– Memory: 32 GB DDR4 ECC
-STORAGE : 5 * 1.2TB SAS 2.5 10K
* RAID CONTROLLER Support Levels (0 ,1 , 5 , 10 , 50 , 60)
– IPMI
* Support for Intelligent Platform Management Interface
* BMC with virtual media over LAN and KVM-over-LAN support
– Network
* Dual Port Gigabit Ethernet
2 FORTINET FORTIGATE 60D ( POE ) WITH ORIGINAL ADAPTORS
Rated 0 out of 5
(0)
Highlight
QTY : 2
FORTINET FORTIGATE 60D ( POE )
WITH ORIGINAL ADAPTORS
SuperMicro TwinPro (2U Twin architecture with 2 Node ) 24Bay 2.5 inch
Rated 0 out of 5
(0)
Highlight
DUAL 1280W Redundant Power Supplies
* Each Server Includes *
– Dual Intel® Xeon® E5-2697 V3
– Total Cores 28/ Therads 56/ Cashe 70MB
– Memory: 32 GB DDR4 ECC
-STORAGE : 5 * 1.2TB SAS 2.5 10K
* RAID CONTROLLER Support Levels (0 ,1 , 5 , 10 , 50 , 60)
– IPMI
* Support for Intelligent Platform Management Interface
* BMC with virtual media over LAN and KVM-over-LAN support
– Network
* Dual Port Gigabit Ethernet
Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE
NETGEAR ProSafe (GS524T) – 24-Port Gigabit Ethernet Switch
Rated 0 out of 5
(0)
Highlight
- 24 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T ports
- Data Transfer Rate: 1.06 Gbps
- Data Link Protocol: Ethernet, Fast Ethernet, Gigabit Ethernet
- Communication Mode: Half-duplex, full-duplex
- Features: Flow control, full duplex capability, auto-sensing per device, auto-uplink (auto MDI/MDI-X)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3ab, IEEE 802.3x
HPE Proliant DL 380 G10 16 BAY SFF ( 8 SAS/SATA + 8 NVME SSD )
Rated 0 out of 5
(0)
Highlight
CPU : Dual GOLD 6138 up to ( 3.70G.H.Z )
Total core 40 / core threads 80 / cache 55 MB
Memory : 64 GB DDR4 ECC
STORAGE : 256GB NVME ( Brand New ) + 8*1.2TB SAS 12G Enterprise
DUAL USB 3 CONNECTORS
NETWORK : HPE 1 Gb 331i
Ethernet adapter 4-ports per controller
HPE DL380 Gen10 Dedicated iLO 5 Management PORT 1 GB
DUAL POWER SUPPLY
EN 
AR 
Reviews
There are no reviews yet.