Only logged in customers who have purchased this product may leave a review.
Cisco Catalyst 3850 48P POE+ Uplink 10G Power Supply 1100W
In Stock
Highlight
⚫️Cisco Catalyst 3850 48P POE+ Uplink 10G Power Supply 1100W
◾48Port 1G PoE+
◾Uplink 10G
◾Layer 3 Switch
◾Web interface
◾ Power Supply 1100W
🔺With Rackmounts
🔺POWER CABLES ORIGINAL Cut Free
◾ 1 Year Warranty
SKU: 31839
Categories: Hot Deals, 48 Port 1G PoE, Ethernet Switches, Switches, Uplink 10G | 48 Port 1G PoE
Brand: Cisco
Related products
HP V1910-24G POE (JE007A) Switch – 24 Gigabit Ethernet Ports – 4 SFP – Layer 3 Static Routing
Rated 0 out of 5
(0)
Highlight
- The HP V1910-24G switch is a powerful networking device that offers 24 Gigabit Ethernet ports for fast and reliable connectivity.
- The switch also supports Layer 3 static routing, which allows you to route traffic between different networks and subnets.
- Web-based management and a command-line interface (CLI) make it easy to configure and manage the switch.
- With support for VLANs, LACP, and STP, this switch provides advanced networking features to help you manage your network more efficiently.
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
Rated 0 out of 5
(0)
Highlight
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE
Dell Switch (5424) -24 x 1 Gigabit Ethernet
Rated 0 out of 5
(0)
Highlight
- 24 10/100/1000BASE-T auto-sensing Gigabit Ethernet switching ports
- 4 SFP combo slots for fiber media support (Note: SFP slots are used instead of the built-in 10/100/1000BaseT ports)
- Auto-negotiation for speed, duplex mode and flow control
- Auto MDI/MDIX Port mirroring Broadcast storm control
- Switch Fabric Capacity 48.0 Gbps
- Forwarding Rate 35.6 Mpps
- Up to 8,000 MAC Addresses
Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE
Cisco Catalyst 2970G-24T-E – 24 Gigabit Ethernet Ports- 4 * 1 GB SFP – Managed
Rated 0 out of 5
(0)
Highlight
- The Catalyst 2970 features robust security features, including port security, Access Control Lists (ACLs), and support for 802.1X authentication.
- It supports advanced Quality of Service (QoS) features to prioritize and manage network traffic based on application and user needs
- The switch supports multiple VLANs, enabling network administrators to segment traffic by department, function, or application.
TP-Link (TL-SG1016 PE) Switch – 16 Gigabit Ethernet Ports , 8 Port (PoE+), Layer 2
Rated 0 out of 5
(0)
Highlight
- The TP-Link (TL-SG1016 PE) switch provides 16 Gigabit Ethernet ports, with PoE+ support on 8 of its ports.
- The PoE+ ports can provide up to 30 watts of power each, which is sufficient for most PoE-enabled devices.
- The switch supports VLANs, LACP, and STP, providing advanced networking features for network aggregation, improved performance, and loop prevention.
- The switch’s Energy-efficient Ethernet (EEE) compliance helps to reduce power consumption and operating costs.
Aruba S2500 Mobility Access Switch-24P-4x10G SFP+ POE
Rated 0 out of 5
(0)
Highlight
The S2500 Mobility Access Switch from Aruba Networks® extends role-based user access, security and operational simplicity to wired networks.
A vital part of Aruba Mobility-Defined NetworksTM, the S2500 delivers secure, virtualized access services to users, regardless of their location, access method, device or applications
NETGEAR Switch (GS716T) -16 x1 Gigabit Ethernet -2 SFP Fiber Ports
Rated 0 out of 5
(0)
Highlight
NETGEAR ProSafe GS716Tv2 – switch – 16 ports Device Type Switch Form Factor External – 1U Dimensions (WxDxH) 17.3 in x 10.2 in x 1.7 in Weight 5.7 lbs Localization North America Ports Qty 16 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T, Ethernet 1000Base-X Data Transfer Rate 1 Gbps Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet Empty Slots 2 x shared SFP (mini-GBIC) Remote Management Protocol SNMP 1, SNMP 3, SNMP 2c, HTTP, HTTPS Communication Mode Half-duplex, full-duplex Features Flow control, full duplex capability, auto-sensing per device, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, store and forward, SNTP support Compliant Standards IEEE 802.3u.
Cisco Catalyst 3650 Switch – 24*1GB Ports – 4*1GB SFP Uplinks – L3 – Managed- Stackable Switch
Rated 0 out of 5
(0)
Highlight
- The Cisco Catalyst 3650 Series Switch, with Cisco StackWise-160 Technology, can stack 9 switches and support up to 160 Gpbs stack bandwidth.
- The Cisco 3650 Catalyst Switch is the next generation of enterprise-class standalone and stackable (optional) access-layer switches that provide the foundation for full convergence between wired and wireless on a single platform.
- The Cisco Catalyst 3650 is built on the advanced Cisco StackWise-160, and takes advantage of the new Cisco Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC).
- This Cisco 3650 Catalyst switch can enable uniform wired-wireless policy enforcement.
Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE
3Com Switch 2824 (CBlUG24)- 24 x 1Gigabit Ethernet
Rated 0 out of 5
(0)
Highlight
24 autosensing 10/100/1000 Ethernet Standards conformance: ISO 8802-3, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.1d (bridging), IEEE 802.3x (flow control), IEEE 802.3ab (Gigabit Ethernet) Media interfaces: 10/100/1000BASE-TX/RJ-45 Switching features: Store-and-forward; full-/half-duplex auto-negotiation; Class-of-Service (CoS) 802.1p traffic prioritization (priority queuing) MAC addresses: 32,000 LED indicators: Power, network traffic/duplex mode, link status/speed Electrical power: Power inlet: IEC 320 AC line frequency: 50/60 Hz Input voltage: 100-240 VAC Current rating: 1A, max Maximum power consumption: 21W Maximum power
Lenovo RackSwitch NE10032 – 32 Ports of 40GbE or 100GbE ( QSFP+/QSFP28) – Layer 3 – Managed
Rated 0 out of 5
(0)
Highlight
- Cloud and virtualization solutions with VM-aware network automation and integration into Lenovo and third-party IT and cloud infrastructure management tools
- The 10 Gb/25 Gb/40 Gb/100 Gb Ethernet NE10032 RackSwitch provides a combination of low latency, non-blocking line-rate switching, and ease of management with 6.4 Tbps throughput.
- The NE10032 RackSwitch includes Layer 3 functionality, which provides security and performance benefits, as inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers
- The NE10032 switch supports VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.
Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE
HP A5120 EI Switch Series (JG245A), Layer 3, Managed Gigabit Ethernet switch with 24 10/100/1000 BaseT ports (NEW)
Rated 0 out of 5
(0)
Highlight
- Provides Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.
- Offers high scalability with two expansion slots that can support two-port 10GbE expansion modules.
- Features Unique Intelligent Resilient Framework (IRF) technology for creating virtual fabrics by virtualizing multiple switches into a single logical device.
- Provides high availability, simplified management, and comprehensive security
Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE
DrayTek Vigor Switch (G1240) 24-Port Switch 24 x 1 Gigabit Ethernet Ports
Rated 0 out of 5
(0)
Highlight
- 4 SFP (Fiber Module) Ports
- -ort Based and 802.1q VLAN
- Auto-Negotiation, Auto-MDIX
- Flow Control: Back pressure for Half-Duplex
- 802.3x Pause Frame for Full-Duplex
- Switch Fabric: 48Gbps / non-blocking
- Wire speed performance
- Mac Address: 8 K MAC address table
- Package buffer memory: 500K Bytes
- Jumbo frame support to 9600 bytes
Recently Viewed
Teradata 315-0610811 Power Distribution Unit – 35x Female IEC 60320 C13 – 10A
Rated 0 out of 5
(0)
Highlight
Type: POWER SWITCH
Brand: TERADATA
Condition: Used
Power Consumption: 10A
Port Plug: 21
Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE
DrayTek Vigor Switch (G1240) 24-Port Switch 24 x 1 Gigabit Ethernet Ports
Rated 0 out of 5
(0)
Highlight
- 4 SFP (Fiber Module) Ports
- -ort Based and 802.1q VLAN
- Auto-Negotiation, Auto-MDIX
- Flow Control: Back pressure for Half-Duplex
- 802.3x Pause Frame for Full-Duplex
- Switch Fabric: 48Gbps / non-blocking
- Wire speed performance
- Mac Address: 8 K MAC address table
- Package buffer memory: 500K Bytes
- Jumbo frame support to 9600 bytes
Cisco 3650 48P 1G PoE+ & Cisco Router 2951 & Fortinet Fortiweb 400C
Rated 0 out of 5
(0)
Highlight
📌Cisco Catalyst 3650 48P PoE+ Uplink 1G
◾48Port 1G PoE+
◾Uplink 1G
◾Layer 3 Switch
◾Power Supply 1025W
🔺With Rackmounts
_______________________
📌Cisco Router 2951
PVDM2 – 64 VO1
▪VlC2-4FXO
▪VWIC3-2MFT-T1/E1
▪VWIC2-2MFT-T1/E1
▪ VIC3-2E/M
________________________
📌FORTINET FortiWeb 400C
Cisco Catalyst 3850 48P POE+ Uplink 10G Power Supply 1100W
Rated 0 out of 5
(0)
Highlight
⚫️Cisco Catalyst 3850 48P POE+ Uplink 10G Power Supply 1100W
◾48Port 1G PoE+
◾Uplink 10G
◾Layer 3 Switch
◾Web interface
◾ Power Supply 1100W
🔺With Rackmounts
🔺POWER CABLES ORIGINAL Cut Free
◾ 1 Year Warranty
4 Switches Cisco 3650 48p 1G PoE+ Uplink 1G
Rated 0 out of 5
(0)
Highlight
QTY : 4
📌Cisco 3650 48p 1G PoE+
-48Port 1G PoE+
-Uplink 1G
-Layer 3 Switch
-Power Supply 1025W
-Web interface
-With Rackmounts
Cisco Catalyst 3850 48P POE+ Uplink 10G Power Supply 1100W
Rated 0 out of 5
(0)
Highlight
Cisco Catalyst 3850 48P POE+ Uplink 10G Power Supply 1100W
◾48Port 1G PoE+
◾Uplink 10G
◾Layer 3 Switch
◾Web interface
◾ Power Supply 1100W
🔺With Rackmounts
🔺POWER CABLES ORIGINAL Cut Free
🔺4 GBICS Free (2*10G+2*1G)
◾ 1 Year Warranty
Reviews
There are no reviews yet.