Only logged in customers who have purchased this product may leave a review.
Cisco Catalyst 9300 – 24 Port RG45 10G UPOE uplink 10G
EGP34,999
24 Port RG45 10G UPOE
uplink 10G
Related products
ARUBA 7030 MOBILITY CONTROLLERS-8 Ports Combo (RJ-45&SFP) – 4096 Concurrent (Users/Devices) – Managed-1 U Rack-Mountable
- Branch and Remote Networking Requirements
- Zero-touch provisioning with limited IT assistance
- Secure access to corporate resources across the hybrid WAN
- Wireless and wired access for employees and guests
- WAN optimization and availability
- Policy-based routing and management
- Unified architecture across all locations
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
Buffalo Business Switch ,16-port ,UnManaged ,Layer 2 Gigabit Switch
Buffalo’s unmanaged business-class 16-port gigabit switch offers a quick and easy way to extend your office network at fast gigabit Ethernet speeds.
– Fast and Easy Setup: Auto-MDIX provides fast plug and play setup with any Ethernet cable
– Forwarding Method is Store & Forward
– 1000Base-T/100BASE-TX/10BASE-T Auto-negotiation 16 ports
– Loop detection (buzzer and LED notification)
– Auto-Negotiation & Auto MDIX – simply plug in, no settings needed
– Full/Half-duplex auto-detect 1000/100/10Mbps – Silent and reliable fanless design
Aruba 2920-24G (J9726A) – 20x 1GbE Ports – 4x 1Gb SFP Combo Ports – Stacking – L3 – GUI Management
- The Aruba 2920 Switch Series provides security, scalability, and ease of use for enterprise edge, SMB and branch office networks.
- A powerful ProVision ASIC delivers low latency, more packet buffering, and adaptive power consumption
- Aruba Layer 3 switch series with stacking, static & RIP routing, IPv6, ACLs, and sFlow.
- Advanced security and network management tools with Aruba ClearPass Policy Manager and Aruba AirWave
- Software-defined Network (SDN) Ready with OpenFlow support
- Layer 4 prioritization Class of Service (CoS)
Nexus (2232TM-E) Fabric Extender -10GBASE-T, 32x (1/10) GEBase-T + 8x10GE Module (SFP+), 2PS, 1 Fan Module, Cisco Parent Switches Cisco Nexus (5000, 6000, 7000, or n9000) Series
- Reduces data center cabling costs and footprint with optimized inter-rack cabling
- Unified fabric and FCoE at the server access layer reduce capital expenditure and operating expenses
- Virtual Port Channel (vPC) and in-service software upgrades (ISSU) Increase resilience
- Virtual machine aware network services facilitate quick expansion of network capacity
HP 5500 series Switch (JG542A) -POE+ – L3-Managed – 48*1GB Ethernet Ports-4*1GB SFP 2*10GB SFP+ – Dual Power Supply
- The HP 5500 series switch delivers unrivaled resiliency, security, and multi-service capabilities at the edge of branch and large campus networks
- 48 auto-sensing GigabitEthernet PoE+ ports
- 4 fixed GbE SFP ports, 2* 10GbE SFP+ ports
- 1 GB SDRAM, Packet buffer capacity: 6 MB and 512 MB flash
- 224 Gb/s routing/switching performance
- Stacking capability – IRF, 9 switches
HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
CISCO N5K-C5548UP-FA – Nexus 5548 UP
Cisco Nexus 5548UP. Switch type: Managed, Switch layer: L2/L3. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000), Basic switching RJ-45 Ethernet ports quantity: 32, Console port: RJ-45. MAC address table: 32000 entries. Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w,…. Rack mounting, Form factor: 1U
HPE OfficeConnect 1920 series (JG924a) Switch – 24 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
HP J8693A Procurve 3500yl-48G-PWR Switch: 48 Gigabit Ports, 1U, PoE, L3/L4
HP J8693A Procurve 3500yl-48G-PWR switch is a 48-port Gigabit Ethernet switch with Power over Ethernet (PoE) capabilities, housed in a 1U form factor. It is a layer 3 (L3) and layer 4 (L4) switch, offering advanced routing and network management capabilities.
- 48 Gigabit Ethernet ports
- Power over Ethernet (PoE) capability
- 1U form factor for efficient use of rack space
- L3/L4 switching for advanced routing and network management
- Support for layer 3 static and RIP routing, and layer 4 access control lists (ACLs)
- Support for VLANs, QoS, and Link Aggregation Control Protocol (LACP)
- IPv6 support for future-proofing your network.
HPE FlexNetwork 5130 JH325A – L3 – Managed – 24 Ports PoE+ 4x 10G SFP+
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports
- Fixed 10GbE ports for high-speed stacking or uplinks
- Provide higher efficiency in IP phone, wireless access point
- Support for multiple services
- Comprehensive security control policies
- Diversified quality of service (QoS) policies
- Excellent manageability
Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply
- The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .
- It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.
- The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.
- The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.
- The switch also includes replaceable dual power supply units and a fan tray module.
Reviews
There are no reviews yet.