Only logged in customers who have purchased this product may leave a review.
Cisco MDS 9250i
* speed: 16G
* Contain 40 ports 16G & 8 ports 10G FCoE & 2 ports 10G FCIP/ISCI
*40 ports 16G with Permenant license
Related products
HP A5120 EI Switch Series (JG245A), Layer 3, Managed Gigabit Ethernet switch with 24 10/100/1000 BaseT ports (NEW)
- Provides Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.
- Offers high scalability with two expansion slots that can support two-port 10GbE expansion modules.
- Features Unique Intelligent Resilient Framework (IRF) technology for creating virtual fabrics by virtualizing multiple switches into a single logical device.
- Provides high availability, simplified management, and comprehensive security
HPE FlexNetwork 5130 JH325A – L3 – Managed – 24 Ports PoE+ 4x 10G SFP+
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports
- Fixed 10GbE ports for high-speed stacking or uplinks
- Provide higher efficiency in IP phone, wireless access point
- Support for multiple services
- Comprehensive security control policies
- Diversified quality of service (QoS) policies
- Excellent manageability
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
CISCO N5K-C5548UP-FA – Nexus 5548 UP
Cisco Nexus 5548UP. Switch type: Managed, Switch layer: L2/L3. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000), Basic switching RJ-45 Ethernet ports quantity: 32, Console port: RJ-45. MAC address table: 32000 entries. Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w,…. Rack mounting, Form factor: 1U
Tripp Lite Auto-Transfer Switch PDU
Tripp Lite’s Auto-Transfer Switch PDU (Power Distribution Unit) automatically switches to a secondary power source in the event of a primary power failure. This ensures continuous, uninterruptible power to connected equipment and can help prevent data loss and equipment damage. This PDU can be used in a variety of settings, including data centers, server rooms, and network closets.
F5 (BIG-IP-1600) Series -4*1Gigabit Ethernet Ports- 2*1GB SFP- 4GB RAM – Dual Core Processor
- F5 BIG-IP 1600 Global Traffic Manager (GTM) distributes DNS and user application requests based on business policies, data center and network conditions
- BIG-IP GTM delivers F5’s high-performance DNS Services with visibility, reporting, and analysis
- Scales and secures DNS responses geographically to survive DDoS attacks; delivers a complete, real-time DNSSEC solution
NEC QX-S1024GT-4G 24-Port Gigabit Ethernet Switch with Managed L2 Features, GUI Management, and Fanless Silent Design [Brand New, Packaging not included]
- Ease of use (WEB GUI or CLI)
- Fanless silent design
- Supports Energy Efficient Ethernet (EEE) function, which is an energy-saving function
- Achieves advanced QoS with 8-class priority control queue, bandwidth control, and PQ/WRR scheduling based on CoS/DSCP
- IEEE802.1X authentication/MAC address authentication prohibits communication from unauthorized terminals
- Supports IGMPv1/v2/v3 snooping as a multicast function
- Filtering by access control list (ACL) by MAC address, IP address, etc. is possible
- Supports link aggregation (LACP support), multi-port loop detection, and port mirroring functions
- SNMPv1/v2c/v3, alive monitoring by ping response is possible
- Supports management functions such as telnet/ssh/ftp/tftp/ntp client/syslog/web console
HP 5500 series Switch (JG542A) -POE+ – L3-Managed – 48*1GB Ethernet Ports-4*1GB SFP 2*10GB SFP+ – Dual Power Supply
- The HP 5500 series switch delivers unrivaled resiliency, security, and multi-service capabilities at the edge of branch and large campus networks
- 48 auto-sensing GigabitEthernet PoE+ ports
- 4 fixed GbE SFP ports, 2* 10GbE SFP+ ports
- 1 GB SDRAM, Packet buffer capacity: 6 MB and 512 MB flash
- 224 Gb/s routing/switching performance
- Stacking capability – IRF, 9 switches
HP 850 Unified Wired-WLAN Appliance, L2/L3/L4 Managed, 8*1GbE (RJ-45)-8*1GbE (SFP)-2*10GB SFP+
- Scalable capacity, performance, and high reliability for medium Enterprise wireless networks
- System-wide approach to WLAN reliability through Wi-Fi Clear Connect
- The HPE 850 Unified Wired-WLAN Appliance provides eight 1000 Mbps Ethernet ports and two 10GbE ports
- Flexible forwarding modes
- Comprehensive feature set for demanding Enterprise environments
Juniper EX4200 Series 48Port POE L3/L4 Managed Switch
Peplink Balance 380 Multi-WAN Router
- Up to 7 advanced load balancing for faster, more responsive networking
- Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
- Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
- IPsec/L2TP/PPTP VPN Functionality
- Advanced QoS Functionality
- IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices
HP V1910-24G POE (JE007A) Switch – 24 Gigabit Ethernet Ports – 4 SFP – Layer 3 Static Routing
- The HP V1910-24G switch is a powerful networking device that offers 24 Gigabit Ethernet ports for fast and reliable connectivity.
- The switch also supports Layer 3 static routing, which allows you to route traffic between different networks and subnets.
- Web-based management and a command-line interface (CLI) make it easy to configure and manage the switch.
- With support for VLANs, LACP, and STP, this switch provides advanced networking features to help you manage your network more efficiently.
Recently Viewed
DELL EMC R740XD 24-Bay SFF Rack Server
🔥 DELL EMC R740XD 24-Bay SFF Rack Server 🔥
💻 Specifications:
▪️ Processor: Dual Intel® Xeon® Platinum 8176 (56 Cores / 112 Threads)
▪️ Memory: 64GB DDR4 ECC (Expandable – ECC Supported)
▪️ Storage: 20 x 1.2TB SAS Enterprise
▪️ RAID Controller: PERC H730 for advanced storage management
▪️ Power Supply: Dual Hot-Plug Platinum 1100W PSU
▪️ Network: Integrated Daughter Card – 2 x 25GbE for ultra-fast connectivity
▪️ Front Ports: iDRAC Direct Micro-USB, 2 x USB 2.0, 1 x USB 3.0 (optional), 1 x VGA
▪️ Rear Ports: iDRAC Dedicated Network, Serial, 2 x USB 3.0, 1 x VGA
HPE SYNERGY 12000 FRAME
HPE SYNERGY 12000 FRAME
* 6 ZONES FOR COMPUTE AND STORAGE , UP TO 12 HALF-HEIGHT OR 6 FULL-HEIGHT COMPUTE MODULES,
* 6 INTERCONNECT MODULE BAYS (3+3 REDUNDANCY) UP TO 40GB PER PORT
* 2 APPLIANCE BAYS FOR MANAGEMENT
* 10 FAN BAYS
* FRONT PANEL, FOR SYNERGY CONSOLE CONNECTIONS
* 6 POWER SUPPLIES BAYS (N+N, N+1 REDUNDANCY)
* HPE SYNERGY MANAGEMENT THAT MAXIMIZES POWER AND COOLING EFFICIENCY.
THE INCLUSER INCLUDE 12 COMPUTE MODULES,
HPE SYNERGY 480 GEN10 COMPUTE MODULE
1. UP TO TWO (2) INTEL®️ XEON®️ SCALABLE FAMILY PROCESSORS
UP TO 28 CORE PER PROCESSOR
2. TWENTY-FOUR (24) DDR4 DIMM MEMORY SLOTS (12 PER PROCESSOR)
3. REMOVABLE DRIVE CAGE WITH TWO HOT-PLUG DRIVE BAYS
( SAS/SATA/SSD SAS/SSD SATA 12BGB )
4.HPE SMART ARRAY P204I-C SR GEN10 CONTROLLER
5. SMART ARRAY BATTERY CONNECTION
6. REMOVABLE DRIVE CAGE WITH 2 HOT-PLUG DRIVE BAYS AND
CONNECTION POINT FOR M.2 DRIVE ADAPTOR KIT
7. MEZZANINE CONNECTORS (3 X16 PCIE 3.0)
8. COMPUTE MODULE POWER AND MANAGEMENT CONNECTOR
9. USB 3.0 MULTIPORT SUPPORT
10. ILO CHIPSET (UNDER DRIVE CAGE)
11. MICROSD SLOT (UNDER DRIVE CAGE)
——————————————
12*HPE SYNERGY 480 GEN10
24*INTEL XEON GOLD 6254 (2 FOR EACH NODE)
12*RAM 16GB DDR4 ECC (16GB FOR EACH NODE)
Cisco Catalyst 3850 48P 1G POE+ Uplink 10G
◾48Port 1G POE+
◾Uplink 10G
◾Layer 3 Switch
◾Web interface
◾Power Supply 1100W
◾Stackable switch
🔺With Rackmounts
DELL EMC R740XD – 24-Bay SFF Rack Server
🔥 DELL EMC R740XD – 24-Bay SFF Rack Server 🔥
💻 Specifications:
▪️ Processor: Dual Intel® Xeon® Gold 6226 (24 Cores / 48 Threads)
▪️ Memory: 64GB DDR4 ECC (Expandable – ECC Supported)
▪️ Storage: 5 x 1.2TB SAS Enterprise HDD
▪️ RAID Controller: PERC H730 – Advanced Storage Management
▪️ Power Supply: Dual Hot-Plug Platinum 1100W PSU
▪️ Network: Integrated Daughter Card – 2 x 25GbE Ultra-Fast Connectivity
▪️ Front Ports: iDRAC Direct Micro-USB, 2 x USB 2.0, 1 x USB 3.0 (Optional), 1 x VGA
▪️ Rear Ports: iDRAC Dedicated Network, Serial, 2 x USB 3.0, 1 x VGA
💡 Perfect For:
✅ Virtualization Platforms (VMware, Hyper-V, Proxmox)
✅ Databases & ERP Systems (Oracle, SQL, SAP)
✅ High-Performance Computing & Enterprise Workloads
✅ File & Storage Servers
✅ Web Hosting & Application Servers
✅ AI, Machine Learning & Big Data Analytics
⚡ High Performance | Enterprise Reliability | Scalable Solution ⚡
HPE ProLiant DL 380 G9 2U Rack Server 15 Bay 3.5 inch
* Dual processors Intel® Xeon® E5-2660 V4
* Ram 64G -ECC – DDR4
* Storage 5*4TB SAS 12G ( Total 30TB SAS 12G )
* 4 Port Lan Ethernet 10/100/1000
RJ45
* Dual power supply 1400 Watt
* 1 Year Warranty
Cisco MDS 9250i
* speed: 16G
* Contain 40 ports 16G & 8 ports 10G FCoE & 2 ports 10G FCIP/ISCI
*40 ports 16G with Permenant license
Dell PowerEdge R930 Rack Server
🚀 Dell PowerEdge R930 Rack Server
💠 CPU: Quad Intel® Xeon® 4* E7-8880 V4 – Max Turbo 3.30GHz
✔ Total Cores: 88 Physical / 176 Threads / 220MB Cache
💠 Memory: 32GB DDR4 ECC – Supports up to 12TB RAM (96 DIMM Slots) 🏆
✔ Supports ECC DDR4 for higher reliability & error correction
💠 Storage: 4 * 2TB SAS Enterprise
✔ Supported Storage Types: SAS / SATA / SSD / SSD SAS / SSD SAS Flash / NVMe
💠 RAID Controller: Dell PERC H730 with Cache Battery 🔒
💠 Management: iDRAC 8 Enterprise – Full remote management 🌐
💠 Network: 2 × 10Gb Fiber Ports + 2 × 1Gb NIC Ports
💠 Power Supply: Quad Hot-plug 1100W Platinum 🔌 – Stable & energy-efficient
💎 Warranty: 1 Year
































Reviews
There are no reviews yet.