Only logged in customers who have purchased this product may leave a review.
Cisco Meraki MS350-24P-HW 24x GbE POE 8port RG45 10G 4x RG45 10G SFP+ Switch
Related products
HP 850 Unified Wired-WLAN Appliance, L2/L3/L4 Managed, 8*1GbE (RJ-45)-8*1GbE (SFP)-2*10GB SFP+
- Scalable capacity, performance, and high reliability for medium Enterprise wireless networks
- System-wide approach to WLAN reliability through Wi-Fi Clear Connect
- The HPE 850 Unified Wired-WLAN Appliance provides eight 1000 Mbps Ethernet ports and two 10GbE ports
- Flexible forwarding modes
- Comprehensive feature set for demanding Enterprise environments
HPE OfficeConnect 1920 series (JG924a) Switch – 24 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
ARUBA 7030 MOBILITY CONTROLLERS-8 Ports Combo (RJ-45&SFP) – 4096 Concurrent (Users/Devices) – Managed-1 U Rack-Mountable
- Branch and Remote Networking Requirements
- Zero-touch provisioning with limited IT assistance
- Secure access to corporate resources across the hybrid WAN
- Wireless and wired access for employees and guests
- WAN optimization and availability
- Policy-based routing and management
- Unified architecture across all locations
HP V1910-24G POE (JE007A) Switch – 24 Gigabit Ethernet Ports – 4 SFP – Layer 3 Static Routing
- The HP V1910-24G switch is a powerful networking device that offers 24 Gigabit Ethernet ports for fast and reliable connectivity.
- The switch also supports Layer 3 static routing, which allows you to route traffic between different networks and subnets.
- Web-based management and a command-line interface (CLI) make it easy to configure and manage the switch.
- With support for VLANs, LACP, and STP, this switch provides advanced networking features to help you manage your network more efficiently.
HPE FlexNetwork 5130 JH325A – L3 – Managed – 24 Ports PoE+ 4x 10G SFP+
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports
- Fixed 10GbE ports for high-speed stacking or uplinks
- Provide higher efficiency in IP phone, wireless access point
- Support for multiple services
- Comprehensive security control policies
- Diversified quality of service (QoS) policies
- Excellent manageability
CISCO N5K-C5548UP-FA – Nexus 5548 UP
Cisco Nexus 5548UP. Switch type: Managed, Switch layer: L2/L3. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000), Basic switching RJ-45 Ethernet ports quantity: 32, Console port: RJ-45. MAC address table: 32000 entries. Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w,…. Rack mounting, Form factor: 1U
Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply
- The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .
- It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.
- The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.
- The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.
- The switch also includes replaceable dual power supply units and a fan tray module.
Cisco Catalyst 3650 Switch – 24*1GB Ports – 4*1GB SFP Uplinks – L3 – Managed- Stackable Switch
- The Cisco Catalyst 3650 Series Switch, with Cisco StackWise-160 Technology, can stack 9 switches and support up to 160 Gpbs stack bandwidth.
- The Cisco 3650 Catalyst Switch is the next generation of enterprise-class standalone and stackable (optional) access-layer switches that provide the foundation for full convergence between wired and wireless on a single platform.
- The Cisco Catalyst 3650 is built on the advanced Cisco StackWise-160, and takes advantage of the new Cisco Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC).
- This Cisco 3650 Catalyst switch can enable uniform wired-wireless policy enforcement.
Tripp Lite Auto-Transfer Switch PDU
Tripp Lite’s Auto-Transfer Switch PDU (Power Distribution Unit) automatically switches to a secondary power source in the event of a primary power failure. This ensures continuous, uninterruptible power to connected equipment and can help prevent data loss and equipment damage. This PDU can be used in a variety of settings, including data centers, server rooms, and network closets.
Peplink Balance 380 Multi-WAN Router
- Up to 7 advanced load balancing for faster, more responsive networking
- Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
- Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
- IPsec/L2TP/PPTP VPN Functionality
- Advanced QoS Functionality
- IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices
Nexus 2232PP Fabric Extender – 32x (1/10) GE (SFP/SFP+) + 8x10GE (SFP+) Module, 2PS, 1 Fan Module, Cisco parent switches Cisco Nexus (5000, 6000, 7000, or n9000) Series
- Reduces data center cabling costs and footprint with optimized inter-rack cabling
- Unified fabric and FCoE at the server access layer reduce capital expenditure and operating expenses
- Virtual Port Channel (vPC) and in-service software upgrades (ISSU) Increase resilience
- Virtual machine aware network services facilitate quick expansion of network capacity
Recently Viewed
HPE ProLiant ML350 Gen8 Tower Server, 2 x Intel Xeon E5-2651 v2 24 Cores / 48 Core Threads 1.8 GHz, 64 GB DDR3 RAM, H.D 5*1TB SAS 10K (New in box)
- Form Factor: Tower Server
- Processor Models: 2x Intel Xeon E5-2651 v2
- Max Cores: 24 Cores / 48 Core Threads – Total 60M Cache
- Total Memory: 64GB ECC DDR3
- Total Memory Slots: 24 DIMMs
- Storage: 5 x 1TB SAS 10K
- Assured Warranty
- Quick Shipping
- 24/7 Technical Support
HPE Proliant DL 360 G9 8 Bay 2.5 inch SFF
CPU : DUAL CPU Intel®️ Xeon®️ Processors E5- 4660 V3 (UpTo 2.90GHz)
▪Total cores 28 / Core Threads 48 / 56MB Cashe
▪MEMORY: 32GB DDR4 ECC
▪ Storage 8 * 1TB SAS Enterprise
▪ 4 Port Lan Ethernet 10/100/1000 RJ45
▪ Dual power supply
▪ 1 Year Warranty
Cisco Catalyst WS-C3650
Layer 3 capabilities
PoE+
24 x 10/100/1000 Ethernet ports
4 x 1G uplink ports
HPE Proliant DL 360 G9 8Bay 2.5 inch
– Dual processors / intel Xeon processor E5-2620 V4
– Ram 128G – ECC – DDR4
– Raid Controller P440AR-2GB Flash-Backed Write Cache
– Storage 3*600G SAS Enterprise
– 4 Port Lan Ethernet 10/100/1000 RJ45
– Dual power supply
– 1 Year Warranty
Juniper Networks EX2300 24P POE+ 4SFP+10G
24 Port RJ45 1G POE+
4 Port SFP+ 10G 4 JUNIBER DACC CABLE 10G FREE
Lenovo RackSwitch G8332 – 32 * 40 Gigabit (QSFP+), 2.56 Tbps throughput, Full-featured L2 and L3, Managed
- Lenovo RackSwitch G8332 is a 1U rack-mountable aggregation switch used for combining traffic from multiple high-speed server racks. It has 32 QSFP+ ports,
- Ultra-low latency and 2.56 Tbps throughput. It is an enterprise-class, full-featured L2 and L3 data center switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data.
- It supports 10 Gigabit Ethernet, 40 Gigabit Ethernet, Converged Enhanced Ethernet (CEE/DCB), and iSCSI configurations.
- The switch uses a wire-speed, non-blocking switching fabric that provides simultaneous wire-speed transport of multiple packets at low latency on all ports.
- The switch has exceptional port density and flexibility with break-out cables, and can support up to 96x 10 Gigabit Ethernet connections and still have 8x 40 Gigabit Ethernet uplinks.
Cisco WS-C3850-48P-L Catalyst 3850
- Layer 3 Switch
- 48 x POE+
- 48 * 10/100/1000 Ethernet
- Web interface
- Stackable switch
O-Net 3M 100G QSFP 28 AOC Optical Cable
Data Rate: 100Gbps
Connector Type: QSFP28 AOC
Cable Length: 3M
Reviews
There are no reviews yet.