Only logged in customers who have purchased this product may leave a review.
CISCO NEXUS 3548-X
Related products
NETGEAR Switch ( GS728TP) -24 x 1 Gigabit Ethernet POE
- Port Configuration- 28 ports, includes 24 gigabit ports and 4 x 1G SFP ports
- Power-Over-Ethernet- 24 PoE+ ports with 190W total power budget
- Flexibility From Uplink Ports- 4 x 1G SFP ports
- Advanced Configuration and Control- Management software with easy-to-use GUI interface offers refined control for secure setup, access, and SNMP (NMS 300) management.
- Energy Efficient- Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode.
- Built To Last- Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance
HPE OfficeConnect 1920s Series (JL381A) Switch – 24 Gigabit Ports – 2*1Gb SFP– Layer 2
- The HP OfficeConnect 1920S Series (JL381A) is a smart-managed Layer 2 switch designed for small and medium-sized businesses.
- The JL381A switch is designed to deliver wire-speed gigabit Ethernet connectivity with up to 80 Gbps switching capacity and up to 59.5 Mpps throughput.
- The switch supports both web-based and command-line interface (CLI) management, as well as SNMP, RMON, and LLDP protocols for network monitoring and control.
- The switch provides advanced security features such as Access Control Lists (ACLs), 802.1X port authentication, and MAC-based authentication to protect the network from unauthorized access and attacks.
Lenovo RackSwitch G8332 – 32 * 40 Gigabit (QSFP+), 2.56 Tbps throughput, Full-featured L2 and L3, Managed
- Lenovo RackSwitch G8332 is a 1U rack-mountable aggregation switch used for combining traffic from multiple high-speed server racks. It has 32 QSFP+ ports,
- Ultra-low latency and 2.56 Tbps throughput. It is an enterprise-class, full-featured L2 and L3 data center switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data.
- It supports 10 Gigabit Ethernet, 40 Gigabit Ethernet, Converged Enhanced Ethernet (CEE/DCB), and iSCSI configurations.
- The switch uses a wire-speed, non-blocking switching fabric that provides simultaneous wire-speed transport of multiple packets at low latency on all ports.
- The switch has exceptional port density and flexibility with break-out cables, and can support up to 96x 10 Gigabit Ethernet connections and still have 8x 40 Gigabit Ethernet uplinks.
HPE FlexNetwork 5130 JH325A – L3 – Managed – 24 Ports PoE+ 4x 10G SFP+
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports
- Fixed 10GbE ports for high-speed stacking or uplinks
- Provide higher efficiency in IP phone, wireless access point
- Support for multiple services
- Comprehensive security control policies
- Diversified quality of service (QoS) policies
- Excellent manageability
Lenovo RackSwitch NE10032 – 32 Ports of 40GbE or 100GbE ( QSFP+/QSFP28) – Layer 3 – Managed
- Cloud and virtualization solutions with VM-aware network automation and integration into Lenovo and third-party IT and cloud infrastructure management tools
- The 10 Gb/25 Gb/40 Gb/100 Gb Ethernet NE10032 RackSwitch provides a combination of low latency, non-blocking line-rate switching, and ease of management with 6.4 Tbps throughput.
- The NE10032 RackSwitch includes Layer 3 functionality, which provides security and performance benefits, as inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers
- The NE10032 switch supports VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.
Cisco Catalyst 2970G-24T-E – 24 Gigabit Ethernet Ports- 4 * 1 GB SFP – Managed
- The Catalyst 2970 features robust security features, including port security, Access Control Lists (ACLs), and support for 802.1X authentication.
- It supports advanced Quality of Service (QoS) features to prioritize and manage network traffic based on application and user needs
- The switch supports multiple VLANs, enabling network administrators to segment traffic by department, function, or application.
Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply
- The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .
- It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.
- The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.
- The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.
- The switch also includes replaceable dual power supply units and a fan tray module.
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
NETGEAR Switch (GS716T) -16 x1 Gigabit Ethernet -2 SFP Fiber Ports
NETGEAR ProSafe GS716Tv2 – switch – 16 ports Device Type Switch Form Factor External – 1U Dimensions (WxDxH) 17.3 in x 10.2 in x 1.7 in Weight 5.7 lbs Localization North America Ports Qty 16 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T, Ethernet 1000Base-X Data Transfer Rate 1 Gbps Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet Empty Slots 2 x shared SFP (mini-GBIC) Remote Management Protocol SNMP 1, SNMP 3, SNMP 2c, HTTP, HTTPS Communication Mode Half-duplex, full-duplex Features Flow control, full duplex capability, auto-sensing per device, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, store and forward, SNTP support Compliant Standards IEEE 802.3u.
NETGEAR Switch ProSafe (GSM 7224)-24 x1Gigabit Ethernet -Layer 2 Switch
- The Netgear GSM7224 is in the ProSafe family of Netgear switches, providing enterprise-class performance and reliability at an affordable price. The Netgear switch has twenty-four Gigabit Ethernet ports (10/100/1000 Mbps) as well as four SFP combo ports. The combo ports are used for stacking and linking additional equipment, allowing your network to grow as your business does. Popular features of the GSM7224 ProSafe switch are VLAN support, Layer 2, managed, Quality of Service
- 24 Ports ,Gigabit Ethernet
- 4 SFP Combo Ports
- Layer 2, Managed
- Quality of Service (QoS),VLAN Support
- 48 Gbps Non-Blocking Bandwidth
- Telnet Remote Management
Brocade ICX 6610-48poe+, Switch-L3-Managed-48x 10/100/1000 + 8x SFP 10G + – Desktop, Rack Mountable
- Delivers chassis-level performance and availability, providing an optimal user experience for streaming video, Virtual Desktop Infrastructure (VDI), Unified Communications (UC), and other mission-critical campus applications
- Offers unprecedented stacking performance with 320 Gbps of stacking bandwidth
- Provides unmatched availability with four fully redundant 40 Gbps stacking ports per switch, hitless stacking failover, hot switch replacement, and dual hot-swappable power supplies and fan assemblies
- Simplifies network operations and protects investments with Brocade HyperEdge™ technology
TP-Link (TL-SG1016 PE) Switch – 16 Gigabit Ethernet Ports , 8 Port (PoE+), Layer 2
- The TP-Link (TL-SG1016 PE) switch provides 16 Gigabit Ethernet ports, with PoE+ support on 8 of its ports.
- The PoE+ ports can provide up to 30 watts of power each, which is sufficient for most PoE-enabled devices.
- The switch supports VLANs, LACP, and STP, providing advanced networking features for network aggregation, improved performance, and loop prevention.
- The switch’s Energy-efficient Ethernet (EEE) compliance helps to reduce power consumption and operating costs.
Recently Viewed
Brocade ICX 6610-48P 8PORT SFP+10G Switch
48-Ports 1G RJ45 PoE+
8 x 10G SFP+ Uplink Port Switch
HP Z2 G3 Mini Workstation
📌HP Z2 G3 Mini Workstation
▪Intel® Xeon® E3-1245 V5
▪ Memory 8G DDR4 ECC
▪ Storage 256GB NVME New in Box ( Brand New )
▪ Graphics Card : NVIDIA Quadro M620 2G


































Reviews
There are no reviews yet.