48port SFP+ 10G
6port QSFP
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
Rated 0 out of 5
(0)
Highlight
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
HP J8693A Procurve 3500yl-48G-PWR Switch: 48 Gigabit Ports, 1U, PoE, L3/L4
Rated 0 out of 5
(0)
Highlight
HP J8693A Procurve 3500yl-48G-PWR switch is a 48-port Gigabit Ethernet switch with Power over Ethernet (PoE) capabilities, housed in a 1U form factor. It is a layer 3 (L3) and layer 4 (L4) switch, offering advanced routing and network management capabilities.
- 48 Gigabit Ethernet ports
- Power over Ethernet (PoE) capability
- 1U form factor for efficient use of rack space
- L3/L4 switching for advanced routing and network management
- Support for layer 3 static and RIP routing, and layer 4 access control lists (ACLs)
- Support for VLANs, QoS, and Link Aggregation Control Protocol (LACP)
- IPv6 support for future-proofing your network.
HPE OfficeConnect 1920 series (JG927a) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
Rated 0 out of 5
(0)
Highlight
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply
Rated 0 out of 5
(0)
Highlight
- The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .
- It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.
- The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.
- The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.
- The switch also includes replaceable dual power supply units and a fan tray module.
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
Rated 0 out of 5
(0)
Highlight
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
HP 5500 series Switch (JG542A) -POE+ – L3-Managed – 48*1GB Ethernet Ports-4*1GB SFP 2*10GB SFP+ – Dual Power Supply
Rated 0 out of 5
(0)
Highlight
- The HP 5500 series switch delivers unrivaled resiliency, security, and multi-service capabilities at the edge of branch and large campus networks
- 48 auto-sensing GigabitEthernet PoE+ ports
- 4 fixed GbE SFP ports, 2* 10GbE SFP+ ports
- 1 GB SDRAM, Packet buffer capacity: 6 MB and 512 MB flash
- 224 Gb/s routing/switching performance
- Stacking capability – IRF, 9 switches
Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE
NEC QX-S1024GT-4G 24-Port Gigabit Ethernet Switch with Managed L2 Features, GUI Management, and Fanless Silent Design [Brand New, Packaging not included]
Rated 0 out of 5
(0)
Highlight
- Ease of use (WEB GUI or CLI)
- Fanless silent design
- Supports Energy Efficient Ethernet (EEE) function, which is an energy-saving function
- Achieves advanced QoS with 8-class priority control queue, bandwidth control, and PQ/WRR scheduling based on CoS/DSCP
- IEEE802.1X authentication/MAC address authentication prohibits communication from unauthorized terminals
- Supports IGMPv1/v2/v3 snooping as a multicast function
- Filtering by access control list (ACL) by MAC address, IP address, etc. is possible
- Supports link aggregation (LACP support), multi-port loop detection, and port mirroring functions
- SNMPv1/v2c/v3, alive monitoring by ping response is possible
- Supports management functions such as telnet/ssh/ftp/tftp/ntp client/syslog/web console
Tripp Lite Auto-Transfer Switch PDU
Rated 0 out of 5
(0)
Highlight
Tripp Lite’s Auto-Transfer Switch PDU (Power Distribution Unit) automatically switches to a secondary power source in the event of a primary power failure. This ensures continuous, uninterruptible power to connected equipment and can help prevent data loss and equipment damage. This PDU can be used in a variety of settings, including data centers, server rooms, and network closets.
Brocade ICX 6610-48poe+, Switch-L3-Managed-48x 10/100/1000 + 8x SFP 10G + – Desktop, Rack Mountable
Rated 0 out of 5
(0)
Highlight
- Delivers chassis-level performance and availability, providing an optimal user experience for streaming video, Virtual Desktop Infrastructure (VDI), Unified Communications (UC), and other mission-critical campus applications
- Offers unprecedented stacking performance with 320 Gbps of stacking bandwidth
- Provides unmatched availability with four fully redundant 40 Gbps stacking ports per switch, hitless stacking failover, hot switch replacement, and dual hot-swappable power supplies and fan assemblies
- Simplifies network operations and protects investments with Brocade HyperEdge™ technology
ARUBA 7030 MOBILITY CONTROLLERS-8 Ports Combo (RJ-45&SFP) – 4096 Concurrent (Users/Devices) – Managed-1 U Rack-Mountable
Rated 0 out of 5
(0)
Highlight
- Branch and Remote Networking Requirements
- Zero-touch provisioning with limited IT assistance
- Secure access to corporate resources across the hybrid WAN
- Wireless and wired access for employees and guests
- WAN optimization and availability
- Policy-based routing and management
- Unified architecture across all locations
Netgear M4300-28G – PoE+ – 24x1G, 2x10G BASE-T, 2xSFP+, Stackable, Layer 3 Managed Switches
Rated 0 out of 5
(0)
Highlight
- Expand your small to medium-sized business’s network capacity with the M4300-28G PoE+ 26-Port 1G/10G PoE+ Compliant Managed Network Switch from Netgear.
- This fully managed rackmount network switch includes Layer 2, 3, and 4 feature sets
- With 24 PoE+ you can provide power and data to IP cameras, access points, VoIP phones, and more.
- The M4300-28G-PoE+ provides 24 Gigabit PoE+ ports with 2 10GBASE-T and 2 10GBASE-X SFP+ uplink connectivity
- The (MM4300-28G) -PoE+ is designed to smoothly transfer data with a 128 Gb/s switching capacity and 95.2 Mpps forwarding rate.
- Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection.
HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing
Rated 0 out of 5
(0)
Highlight
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Recently Viewed
Dell Power Edge R730XD ( 12* 3.5 inch LFF )
Rated 0 out of 5
(0)
Highlight
Full Option
Dual processors / intel Xeon processor E5-2698 V3
Raid Controller H730 + Battery
Ram 32GB ECC DDR4
Storage 12*2TB SAS Dell Enterprise Plus ( Total 24T SAS Dell Enterprise Plus )
Dual Power Supply 750 Watt Platinum
1 Year Warranty
EN 
AR 
Reviews
There are no reviews yet.