Only logged in customers who have purchased this product may leave a review.
Cisco Nexus 9396PX – Switch
In Stock
Highlight
Compare
L3
managed
48 port 1 Gigabit / 10 Gigabit SFP+ +6 port 40 Gigabit QSFP+
Related products
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
Rated 0 out of 5
(0)
Highlight
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
EGP34,999
Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply
Rated 0 out of 5
(0)
Highlight
- The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .
- It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.
- The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.
- The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.
- The switch also includes replaceable dual power supply units and a fan tray module.
Peplink Balance 380 Multi-WAN Router
Rated 0 out of 5
(0)
Highlight
- Up to 7 advanced load balancing for faster, more responsive networking
- Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
- Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
- IPsec/L2TP/PPTP VPN Functionality
- Advanced QoS Functionality
- IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices
EGP2,499 EGP4,999
Tripp Lite Auto-Transfer Switch PDU
Rated 0 out of 5
(0)
Highlight
Tripp Lite’s Auto-Transfer Switch PDU (Power Distribution Unit) automatically switches to a secondary power source in the event of a primary power failure. This ensures continuous, uninterruptible power to connected equipment and can help prevent data loss and equipment damage. This PDU can be used in a variety of settings, including data centers, server rooms, and network closets.
EGP1,999 EGP3,750
Aruba S2500 Mobility Access Switch-24P-4x10G SFP+ POE
Rated 0 out of 5
(0)
Highlight
The S2500 Mobility Access Switch from Aruba Networks® extends role-based user access, security and operational simplicity to wired networks.
A vital part of Aruba Mobility-Defined NetworksTM, the S2500 delivers secure, virtualized access services to users, regardless of their location, access method, device or applications
HPE FlexNetwork 5130 JH325A – L3 – Managed – 24 Ports PoE+ 4x 10G SFP+
Rated 0 out of 5
(0)
Highlight
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports
- Fixed 10GbE ports for high-speed stacking or uplinks
- Provide higher efficiency in IP phone, wireless access point
- Support for multiple services
- Comprehensive security control policies
- Diversified quality of service (QoS) policies
- Excellent manageability
Netgear M4300-28G – PoE+ – 24x1G, 2x10G BASE-T, 2xSFP+, Stackable, Layer 3 Managed Switches
Rated 0 out of 5
(0)
Highlight
- Expand your small to medium-sized business’s network capacity with the M4300-28G PoE+ 26-Port 1G/10G PoE+ Compliant Managed Network Switch from Netgear.
- This fully managed rackmount network switch includes Layer 2, 3, and 4 feature sets
- With 24 PoE+ you can provide power and data to IP cameras, access points, VoIP phones, and more.
- The M4300-28G-PoE+ provides 24 Gigabit PoE+ ports with 2 10GBASE-T and 2 10GBASE-X SFP+ uplink connectivity
- The (MM4300-28G) -PoE+ is designed to smoothly transfer data with a 128 Gb/s switching capacity and 95.2 Mpps forwarding rate.
- Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection.
HP J8693A Procurve 3500yl-48G-PWR Switch: 48 Gigabit Ports, 1U, PoE, L3/L4
Rated 0 out of 5
(0)
Highlight
HP J8693A Procurve 3500yl-48G-PWR switch is a 48-port Gigabit Ethernet switch with Power over Ethernet (PoE) capabilities, housed in a 1U form factor. It is a layer 3 (L3) and layer 4 (L4) switch, offering advanced routing and network management capabilities.
- 48 Gigabit Ethernet ports
- Power over Ethernet (PoE) capability
- 1U form factor for efficient use of rack space
- L3/L4 switching for advanced routing and network management
- Support for layer 3 static and RIP routing, and layer 4 access control lists (ACLs)
- Support for VLANs, QoS, and Link Aggregation Control Protocol (LACP)
- IPv6 support for future-proofing your network.
HP ProCurve 4208vl Switch – 140*1GbE Gigabit Ports – 28*1 GbE SFP – 7 Modulars ( J9033A)
Rated 0 out of 5
(0)
Highlight
- Layer 2 and Layer 3 lite feature set
- Scalable 10/100/1000 connectivity
- Uni-Directional Link Detection (UDLD)
- Layer 2 switching , Layer 3 routing
- Dynamic ARP protection
- Source-port filtering
- Multiple user authentication methods
EGP29,999
HP V1910-24G POE (JE007A) Switch – 24 Gigabit Ethernet Ports – 4 SFP – Layer 3 Static Routing
Rated 0 out of 5
(0)
Highlight
- The HP V1910-24G switch is a powerful networking device that offers 24 Gigabit Ethernet ports for fast and reliable connectivity.
- The switch also supports Layer 3 static routing, which allows you to route traffic between different networks and subnets.
- Web-based management and a command-line interface (CLI) make it easy to configure and manage the switch.
- With support for VLANs, LACP, and STP, this switch provides advanced networking features to help you manage your network more efficiently.
EGP4,999
Nexus (2232TM-E) Fabric Extender -10GBASE-T, 32x (1/10) GEBase-T + 8x10GE Module (SFP+), 2PS, 1 Fan Module, Cisco Parent Switches Cisco Nexus (5000, 6000, 7000, or n9000) Series
Rated 0 out of 5
(0)
Highlight
- Reduces data center cabling costs and footprint with optimized inter-rack cabling
- Unified fabric and FCoE at the server access layer reduce capital expenditure and operating expenses
- Virtual Port Channel (vPC) and in-service software upgrades (ISSU) Increase resilience
- Virtual machine aware network services facilitate quick expansion of network capacity
EGP12,499
Juniper EX4200 Series 48Port POE L3/L4 Managed Switch
Rated 0 out of 5
(0)
Highlight
– 48*1Gbps include 8 ports power over Ethernet
– (2-port *10GbE SFP / 2-port *1GbE SFP) Uplink Module
– Supported web GUI management
– Dual Power supply
EGP7,499
EN 
AR 
Reviews
There are no reviews yet.