Only logged in customers who have purchased this product may leave a review.
Cisco nexus N5K-C5672UP
EGP18,000 EGP36,000
العرض ده ببلاش للتجار والموردين علي اي فاتورة بـ 99,000 خلال شهر أغسطس🔥🔥🔥
Cisco nexus N5K-C5672UP
32 Port SFP+ 10G
16 Port San 8G
6 Port QSFP+
Related products
TP-Link (TL-SG1024) Switch – 24 Gigabit Ethernet Ports, Unmanaged, Layer 2
- The TL-SG1024 Gigabit Ethernet Switch provides you with a high-performance, low-cost, Easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network.
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Innovative energy-efficient technology saves power consumption
- Supports MAC address self-learning and auto MDI/MDIX
HP J8693A Procurve 3500yl-48G-PWR Switch: 48 Gigabit Ports, 1U, PoE, L3/L4
HP J8693A Procurve 3500yl-48G-PWR switch is a 48-port Gigabit Ethernet switch with Power over Ethernet (PoE) capabilities, housed in a 1U form factor. It is a layer 3 (L3) and layer 4 (L4) switch, offering advanced routing and network management capabilities.
- 48 Gigabit Ethernet ports
- Power over Ethernet (PoE) capability
- 1U form factor for efficient use of rack space
- L3/L4 switching for advanced routing and network management
- Support for layer 3 static and RIP routing, and layer 4 access control lists (ACLs)
- Support for VLANs, QoS, and Link Aggregation Control Protocol (LACP)
- IPv6 support for future-proofing your network.
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
Peplink Balance 380 Multi-WAN Router
- Up to 7 advanced load balancing for faster, more responsive networking
- Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
- Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
- IPsec/L2TP/PPTP VPN Functionality
- Advanced QoS Functionality
- IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices
F5 (BIG-IP-1600) Series -4*1Gigabit Ethernet Ports- 2*1GB SFP- 4GB RAM – Dual Core Processor
- F5 BIG-IP 1600 Global Traffic Manager (GTM) distributes DNS and user application requests based on business policies, data center and network conditions
- BIG-IP GTM delivers F5’s high-performance DNS Services with visibility, reporting, and analysis
- Scales and secures DNS responses geographically to survive DDoS attacks; delivers a complete, real-time DNSSEC solution
Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply
- The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .
- It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.
- The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.
- The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.
- The switch also includes replaceable dual power supply units and a fan tray module.
NETGEAR ProSAFE JGS524 24-Port Gigabit Ethernet Unmanaged Switch with Auto-Uplink
- 10/100/1000Base-T gigabit technology for high-speed network connectivity
- Rackmountable design for easy installation in a server room or data center
- Plug and play functionality for easy setup and immediate use
- Auto Uplink™️ feature automatically detects and adjusts for straight-through or crossover cables
- Energy-saving auto power-down mode for ports not in use
- Compatible with a wide range of 10-, 100-, and 1000-Mbps devices for versatile network integration
- Compact size for desktop placement or standard 19-inch rack mounting.
HPE OfficeConnect 1920 series (JG924a) Switch – 24 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Buffalo Business Switch ,16-port ,UnManaged ,Layer 2 Gigabit Switch
Buffalo’s unmanaged business-class 16-port gigabit switch offers a quick and easy way to extend your office network at fast gigabit Ethernet speeds.
– Fast and Easy Setup: Auto-MDIX provides fast plug and play setup with any Ethernet cable
– Forwarding Method is Store & Forward
– 1000Base-T/100BASE-TX/10BASE-T Auto-negotiation 16 ports
– Loop detection (buzzer and LED notification)
– Auto-Negotiation & Auto MDIX – simply plug in, no settings needed
– Full/Half-duplex auto-detect 1000/100/10Mbps – Silent and reliable fanless design
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
HP A5120 EI Switch Series (JG245A), Layer 3, Managed Gigabit Ethernet switch with 24 10/100/1000 BaseT ports (NEW)
- Provides Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.
- Offers high scalability with two expansion slots that can support two-port 10GbE expansion modules.
- Features Unique Intelligent Resilient Framework (IRF) technology for creating virtual fabrics by virtualizing multiple switches into a single logical device.
- Provides high availability, simplified management, and comprehensive security
Nexus 2232PP Fabric Extender – 32x (1/10) GE (SFP/SFP+) + 8x10GE (SFP+) Module, 2PS, 1 Fan Module, Cisco parent switches Cisco Nexus (5000, 6000, 7000, or n9000) Series
- Reduces data center cabling costs and footprint with optimized inter-rack cabling
- Unified fabric and FCoE at the server access layer reduce capital expenditure and operating expenses
- Virtual Port Channel (vPC) and in-service software upgrades (ISSU) Increase resilience
- Virtual machine aware network services facilitate quick expansion of network capacity
Recently Viewed
2 Switches Cisco Catalyst 3650 48P PoE+ Uplink 1G + CISCO ASA 5515-X Firewall
📌CISCO ASA 5515-X Firewall 🔥
📌Cisco Catalyst 3650 48P PoE+ Uplink 1G
◾48Port 1G PoE+
◾Uplink 1G
◾Layer 3 Switch
◾Power Supply 1025W
🔺With Rackmounts
HPE Proliant DL 360 G9 Rack Server ( 🔥10 BAY🔥 2.5 inch SFF )
📌HPE Proliant DL 360 G9 Rack Server ( 🔥10 BAY🔥 2.5 inch SFF )
▪CPU : DUAL Intel Xeon processor E5- 2673 V3 ( Turbo Speed 3.10 GHz )
▪Total cores 24 / Core Threads 48 / 60MB Cashe
▪MEMORY: 32GB DDR4 ECC
▪ Storage 10 * 256GB SSD New in Box (( 3 Years Warranty ))
▪ Smart Array P440AR-Backed Write Cache 2GB + Battery
▪LAN Card 4*1G Ethernet RJ45
▪DUAL POWER SUPPLY
🥇1 YEAR WARRANTY Including ALL PARTS🥇
HPE APOLLO 4200 GEN9 SERVER ( 24-Bay LFF + 6-Bay SFF )
📌HPE APOLLO 4200 GEN9 SERVER ( 24-Bay LFF + 6-Bay SFF )
▪CPU : DUAL Intel Xeon E5- 2680 V4 (UpTo 3.30GHz)
▪Total cores 28 / Core Threads 56 / 70MB Cashe
◾ Memory: 128GB DDR4 ECC ( UP TO 2TB RAM )
* RAID CONTROLLER P840AR 4G + BATTERY
◾ STORAGE : 2*400G SSD Enterprise Intel Pro + 10*3TB SAS Enterprise ( Total 30TB SAS )
◾ Full Caddy 24 Caddy
◾ Supports SAS/SATA/SSD/SSD SAS/ SSD SAS Flash/nvme HOT-PLUG LFF SAS/ UP TO 448 TB🔥
◾ NETWORK : DUAL 10Base-T/100Base-TX/1000Base-TX + FIBER CARD 2PORT 40G BUILTIN
◾ iLO 4 MANAGEMENT TOOL WITH REMOTE CONSOL
◾ DUAL USB 3.0 CONNECTORS
Dual PCIe3 x16 ( 16, 8, 4, 1 ) + TRIPLE PCIe3 x 8 ( 8, 4, 1 )
◾ DUAL POWER SUPPLY 1400 WATT
🔺🥇1 YEAR WARRANTY Including ALL PARTS🥇🔺
Cisco Catalyst 9300 With 8 Gbic 10G FREE & Cisco Router 2951
📌Cisco Catalyst 9300 With 8 Gbic 10G FREE
24 Port RJ45 10G UPOE
Uplink 8 Port 10G
Layer 3 Switch
With Rackmounts
With 8 Gbic 10G FREE
📌Cisco Router 2951
PVDM2 – 64 VO1
▪VlC2-4FXO
▪VWIC3-2MFT-T1/E1
▪VWIC2-2MFT-T1/E1
▪ VIC3-2E/M
Cisco ISR4331
With licenses :
SECURITYK9
UCK9
APPPK9
4 Voice FXO interfaces
HPE Proliant DL 360 G9 V4 4 Bay
– Dual Processor / Intel Xeon E5-2620 V4
– Ram 16G -ECC – DDR4
– Storage 128G SSD + 2*2TB SAS Enterprise
– 4 Port Lan Ethernet 10/100/1000 RJ45 + 2 Port FLR-QSFP 40G G9 Adapter
– Dual power supply ( 1400 Watt ) Turbo
Brocade NetIron CES 2048FX With 10 Gbic cisco 1G FREE
48 Port SFP 1G
2 Port SFP+ 10G
HPE APOLLO 4200 GEN9 SERVER ( 24-Bay LFF + 6-Bay SFF )
CPU : DUAL INTEL XEON E5-2660 V4 – Total 70MB Cashe / Total 56 Core Therads
Memory:64 DDR4 ECC ( UP TO 2TB RAM )
RAID CONTROLLER P840AR + BATTERY
STORAGE : 2*512G SSD ( New in Box ) + 10*3TB SAS New in Box ( Total 30TB SAS New )
Supports SAS/SATA/SSD/SSD SAS/ SSD SAS Flash/nvme HOT-PLUG LFF SAS/ UP TO 448 TB🔥
NETWORK : DUAL 10Base-T/100Base-TX/1000Base-TX + QUAD PORT 1GB RJ45 PCI ( OPTIONAL )
DUAL POWER SUPPLY 1400 WATT
iLO 4 MANAGEMENT TOOL WITH REMOTE CONSOL
DUAL USB 3.0 CONNECTORS
Dual PCIe3 x16 ( 16, 8, 4, 1 ) + TRIPLE PCIe3 x 8 ( 8, 4, 1
Reviews
There are no reviews yet.