Only logged in customers who have purchased this product may leave a review.
Dell N2048P POE
Related products
HP 5500 series Switch (JG542A) -POE+ – L3-Managed – 48*1GB Ethernet Ports-4*1GB SFP 2*10GB SFP+ – Dual Power Supply
- The HP 5500 series switch delivers unrivaled resiliency, security, and multi-service capabilities at the edge of branch and large campus networks
- 48 auto-sensing GigabitEthernet PoE+ ports
- 4 fixed GbE SFP ports, 2* 10GbE SFP+ ports
- 1 GB SDRAM, Packet buffer capacity: 6 MB and 512 MB flash
- 224 Gb/s routing/switching performance
- Stacking capability – IRF, 9 switches
HPE FlexNetwork 5130 JH325A – L3 – Managed – 24 Ports PoE+ 4x 10G SFP+
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports
- Fixed 10GbE ports for high-speed stacking or uplinks
- Provide higher efficiency in IP phone, wireless access point
- Support for multiple services
- Comprehensive security control policies
- Diversified quality of service (QoS) policies
- Excellent manageability
Lenovo RackSwitch G8332 – 32 * 40 Gigabit (QSFP+), 2.56 Tbps throughput, Full-featured L2 and L3, Managed
- Lenovo RackSwitch G8332 is a 1U rack-mountable aggregation switch used for combining traffic from multiple high-speed server racks. It has 32 QSFP+ ports,
- Ultra-low latency and 2.56 Tbps throughput. It is an enterprise-class, full-featured L2 and L3 data center switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data.
- It supports 10 Gigabit Ethernet, 40 Gigabit Ethernet, Converged Enhanced Ethernet (CEE/DCB), and iSCSI configurations.
- The switch uses a wire-speed, non-blocking switching fabric that provides simultaneous wire-speed transport of multiple packets at low latency on all ports.
- The switch has exceptional port density and flexibility with break-out cables, and can support up to 96x 10 Gigabit Ethernet connections and still have 8x 40 Gigabit Ethernet uplinks.
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
HPE OfficeConnect 1920s Series (JL381A) Switch – 24 Gigabit Ports – 2*1Gb SFP– Layer 2
- The HP OfficeConnect 1920S Series (JL381A) is a smart-managed Layer 2 switch designed for small and medium-sized businesses.
- The JL381A switch is designed to deliver wire-speed gigabit Ethernet connectivity with up to 80 Gbps switching capacity and up to 59.5 Mpps throughput.
- The switch supports both web-based and command-line interface (CLI) management, as well as SNMP, RMON, and LLDP protocols for network monitoring and control.
- The switch provides advanced security features such as Access Control Lists (ACLs), 802.1X port authentication, and MAC-based authentication to protect the network from unauthorized access and attacks.
DrayTek Vigor Switch (G1240) 24-Port Switch 24 x 1 Gigabit Ethernet Ports
- 4 SFP (Fiber Module) Ports
- -ort Based and 802.1q VLAN
- Auto-Negotiation, Auto-MDIX
- Flow Control: Back pressure for Half-Duplex
- 802.3x Pause Frame for Full-Duplex
- Switch Fabric: 48Gbps / non-blocking
- Wire speed performance
- Mac Address: 8 K MAC address table
- Package buffer memory: 500K Bytes
- Jumbo frame support to 9600 bytes
HP A5120 EI Switch Series (JG245A), Layer 3, Managed Gigabit Ethernet switch with 24 10/100/1000 BaseT ports (NEW)
- Provides Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.
- Offers high scalability with two expansion slots that can support two-port 10GbE expansion modules.
- Features Unique Intelligent Resilient Framework (IRF) technology for creating virtual fabrics by virtualizing multiple switches into a single logical device.
- Provides high availability, simplified management, and comprehensive security
3Com Switch 2824 (CBlUG24)- 24 x 1Gigabit Ethernet
24 autosensing 10/100/1000 Ethernet Standards conformance: ISO 8802-3, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.1d (bridging), IEEE 802.3x (flow control), IEEE 802.3ab (Gigabit Ethernet) Media interfaces: 10/100/1000BASE-TX/RJ-45 Switching features: Store-and-forward; full-/half-duplex auto-negotiation; Class-of-Service (CoS) 802.1p traffic prioritization (priority queuing) MAC addresses: 32,000 LED indicators: Power, network traffic/duplex mode, link status/speed Electrical power: Power inlet: IEC 320 AC line frequency: 50/60 Hz Input voltage: 100-240 VAC Current rating: 1A, max Maximum power consumption: 21W Maximum power
TP-Link (TL-SG1016 PE) Switch – 16 Gigabit Ethernet Ports , 8 Port (PoE+), Layer 2
- The TP-Link (TL-SG1016 PE) switch provides 16 Gigabit Ethernet ports, with PoE+ support on 8 of its ports.
- The PoE+ ports can provide up to 30 watts of power each, which is sufficient for most PoE-enabled devices.
- The switch supports VLANs, LACP, and STP, providing advanced networking features for network aggregation, improved performance, and loop prevention.
- The switch’s Energy-efficient Ethernet (EEE) compliance helps to reduce power consumption and operating costs.
NETGEAR Switch (GS716T) -16 x1 Gigabit Ethernet -2 SFP Fiber Ports
NETGEAR ProSafe GS716Tv2 – switch – 16 ports Device Type Switch Form Factor External – 1U Dimensions (WxDxH) 17.3 in x 10.2 in x 1.7 in Weight 5.7 lbs Localization North America Ports Qty 16 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T, Ethernet 1000Base-X Data Transfer Rate 1 Gbps Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet Empty Slots 2 x shared SFP (mini-GBIC) Remote Management Protocol SNMP 1, SNMP 3, SNMP 2c, HTTP, HTTPS Communication Mode Half-duplex, full-duplex Features Flow control, full duplex capability, auto-sensing per device, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, store and forward, SNTP support Compliant Standards IEEE 802.3u.
Cisco Catalyst 2970G-24T-E – 24 Gigabit Ethernet Ports- 4 * 1 GB SFP – Managed
- The Catalyst 2970 features robust security features, including port security, Access Control Lists (ACLs), and support for 802.1X authentication.
- It supports advanced Quality of Service (QoS) features to prioritize and manage network traffic based on application and user needs
- The switch supports multiple VLANs, enabling network administrators to segment traffic by department, function, or application.
Lenovo RackSwitch NE10032 – 32 Ports of 40GbE or 100GbE ( QSFP+/QSFP28) – Layer 3 – Managed
- Cloud and virtualization solutions with VM-aware network automation and integration into Lenovo and third-party IT and cloud infrastructure management tools
- The 10 Gb/25 Gb/40 Gb/100 Gb Ethernet NE10032 RackSwitch provides a combination of low latency, non-blocking line-rate switching, and ease of management with 6.4 Tbps throughput.
- The NE10032 RackSwitch includes Layer 3 functionality, which provides security and performance benefits, as inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers
- The NE10032 switch supports VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.
Recently Viewed
HP Workstaion Z640
📌HP Workstaion Z640
▪Intel®️ Xeon®️ Processor E5-2680 v4 ( Max Turbo Frequency 3:30 GHz )
▪ Memory 16G DDR4 ECC
▪ Storage 256 SSD (( Nvme ))
▪ Graphics Card : NVIDIA Quadro P2200 5G
▪ Power Supply 950W
▪ 1 Year Warranty
HP WorkStation Z4 G4
📌HP Work Station Z4 G4
▪ CPU : Intel®️ Xeon®️ Processor W-2133 (Up To 3.90 Ghz)
▪ Memory 16GB DDR4 – ECC
▪ Storage 256GB NVME
▪ Graphics Card : NVIDIA GeForce GTX 1080 Ti 11G Gaming
▪ 1 year warranty
Dell PowerEdge R820 8 Bay 2.5″ Rack Server
* Quad Processor Intel ® Xeon ®
E5-4620 V2
* Total 32 Core / 64 Cores Threads /
80MB Cache.
* Memory 64G ECC
* Storage 8 * 900GB SAS 10k
Enterprise
* 4 port Network 10/100/1000 RJ45
* Dual Power Supply
* 1 Year Warranty
Cisco nexus N5K-C5672UP
العرض ده ببلاش للتجار والموردين علي اي فاتورة بـ 99,000 خلال شهر أغسطس🔥🔥🔥
Cisco nexus N5K-C5672UP
32 Port SFP+ 10G
16 Port San 8G
6 Port QSFP+
HPE SYNERGY 12000 FRAME
HPE SYNERGY 12000 FRAME
* 6 ZONES FOR COMPUTE AND STORAGE , UP TO 12 HALF-HEIGHT OR 6 FULL-HEIGHT COMPUTE MODULES,
* 6 INTERCONNECT MODULE BAYS (3+3 REDUNDANCY) UP TO 40GB PER PORT
* 2 APPLIANCE BAYS FOR MANAGEMENT
* 10 FAN BAYS
* FRONT PANEL, FOR SYNERGY CONSOLE CONNECTIONS
* 6 POWER SUPPLIES BAYS (N+N, N+1 REDUNDANCY)
* HPE SYNERGY MANAGEMENT THAT MAXIMIZES POWER AND COOLING EFFICIENCY.
THE INCLUSER INCLUDE 12 COMPUTE MODULES,
HPE SYNERGY 480 GEN10 COMPUTE MODULE
1. UP TO TWO (2) INTEL®️ XEON®️ SCALABLE FAMILY PROCESSORS
UP TO 28 CORE PER PROCESSOR
2. TWENTY-FOUR (24) DDR4 DIMM MEMORY SLOTS (12 PER PROCESSOR)
3. REMOVABLE DRIVE CAGE WITH TWO HOT-PLUG DRIVE BAYS
( SAS/SATA/SSD SAS/SSD SATA 12BGB )
4.HPE SMART ARRAY P204I-C SR GEN10 CONTROLLER
5. SMART ARRAY BATTERY CONNECTION
6. REMOVABLE DRIVE CAGE WITH 2 HOT-PLUG DRIVE BAYS AND
CONNECTION POINT FOR M.2 DRIVE ADAPTOR KIT
7. MEZZANINE CONNECTORS (3 X16 PCIE 3.0)
8. COMPUTE MODULE POWER AND MANAGEMENT CONNECTOR
9. USB 3.0 MULTIPORT SUPPORT
10. ILO CHIPSET (UNDER DRIVE CAGE)
11. MICROSD SLOT (UNDER DRIVE CAGE)
——————————————
12*HPE SYNERGY 480 GEN10
24*INTEL XEON GOLD 6230 (2 FOR EACH NODE)
12*RAM 16GB DDR4 ECC (16GB FOR EACH NODE)






































Reviews
There are no reviews yet.