Only logged in customers who have purchased this product may leave a review.
Dell Power Connect (5524) 24 x 1Gigabit Ethernet 2SFP+10GLayer 3 Switch
- 24 Ports
- 10/100/1000 Gigabit
- 2x 10 GbE / 1 GbE SFP+ Fiber Ports
- 2x HDMI Stacking Ports, 10 Gb per Port
- Layer 3, Managed
- Broadcast Storm Control
- IPv6 Support
- Web Based GUI
- Dual Firmware Image Support
- Rapid Spanning Tree Protocol (RSTP) Support
- 128 Gbps Switch Fabric Capacity
- 65.47 Mpps Forwarding Rate
- Supports up to 16,000 MAC Addresses
- Supports 65 Layer 3 Static Routes
- 802.1Q VLAN Support
- Supports Quality of Service (QoS),Up to 8 Ports per Link
Related products
HP A5120 EI Switch Series (JG245A), Layer 3, Managed Gigabit Ethernet switch with 24 10/100/1000 BaseT ports (NEW)
- Provides Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.
- Offers high scalability with two expansion slots that can support two-port 10GbE expansion modules.
- Features Unique Intelligent Resilient Framework (IRF) technology for creating virtual fabrics by virtualizing multiple switches into a single logical device.
- Provides high availability, simplified management, and comprehensive security
Aruba 2920-24G (J9726A) – 20x 1GbE Ports – 4x 1Gb SFP Combo Ports – Stacking – L3 – GUI Management
- The Aruba 2920 Switch Series provides security, scalability, and ease of use for enterprise edge, SMB and branch office networks.
- A powerful ProVision ASIC delivers low latency, more packet buffering, and adaptive power consumption
- Aruba Layer 3 switch series with stacking, static & RIP routing, IPv6, ACLs, and sFlow.
- Advanced security and network management tools with Aruba ClearPass Policy Manager and Aruba AirWave
- Software-defined Network (SDN) Ready with OpenFlow support
- Layer 4 prioritization Class of Service (CoS)
Tripp Lite Auto-Transfer Switch PDU
Tripp Lite’s Auto-Transfer Switch PDU (Power Distribution Unit) automatically switches to a secondary power source in the event of a primary power failure. This ensures continuous, uninterruptible power to connected equipment and can help prevent data loss and equipment damage. This PDU can be used in a variety of settings, including data centers, server rooms, and network closets.
HPE FlexNetwork 5130 JH325A – L3 – Managed – 24 Ports PoE+ 4x 10G SFP+
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports
- Fixed 10GbE ports for high-speed stacking or uplinks
- Provide higher efficiency in IP phone, wireless access point
- Support for multiple services
- Comprehensive security control policies
- Diversified quality of service (QoS) policies
- Excellent manageability
Peplink Balance 380 Multi-WAN Router
- Up to 7 advanced load balancing for faster, more responsive networking
- Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
- Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
- IPsec/L2TP/PPTP VPN Functionality
- Advanced QoS Functionality
- IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices
Cisco Catalyst 2970G-24T-E – 24 Gigabit Ethernet Ports- 4 * 1 GB SFP – Managed
- The Catalyst 2970 features robust security features, including port security, Access Control Lists (ACLs), and support for 802.1X authentication.
- It supports advanced Quality of Service (QoS) features to prioritize and manage network traffic based on application and user needs
- The switch supports multiple VLANs, enabling network administrators to segment traffic by department, function, or application.
Brocade ICX 6610-48poe+, Switch-L3-Managed-48x 10/100/1000 + 8x SFP 10G + – Desktop, Rack Mountable
- Delivers chassis-level performance and availability, providing an optimal user experience for streaming video, Virtual Desktop Infrastructure (VDI), Unified Communications (UC), and other mission-critical campus applications
- Offers unprecedented stacking performance with 320 Gbps of stacking bandwidth
- Provides unmatched availability with four fully redundant 40 Gbps stacking ports per switch, hitless stacking failover, hot switch replacement, and dual hot-swappable power supplies and fan assemblies
- Simplifies network operations and protects investments with Brocade HyperEdge™ technology
Buffalo Business Switch ,16-port ,UnManaged ,Layer 2 Gigabit Switch
Buffalo’s unmanaged business-class 16-port gigabit switch offers a quick and easy way to extend your office network at fast gigabit Ethernet speeds.
– Fast and Easy Setup: Auto-MDIX provides fast plug and play setup with any Ethernet cable
– Forwarding Method is Store & Forward
– 1000Base-T/100BASE-TX/10BASE-T Auto-negotiation 16 ports
– Loop detection (buzzer and LED notification)
– Auto-Negotiation & Auto MDIX – simply plug in, no settings needed
– Full/Half-duplex auto-detect 1000/100/10Mbps – Silent and reliable fanless design
HP V1910-24G POE (JE007A) Switch – 24 Gigabit Ethernet Ports – 4 SFP – Layer 3 Static Routing
- The HP V1910-24G switch is a powerful networking device that offers 24 Gigabit Ethernet ports for fast and reliable connectivity.
- The switch also supports Layer 3 static routing, which allows you to route traffic between different networks and subnets.
- Web-based management and a command-line interface (CLI) make it easy to configure and manage the switch.
- With support for VLANs, LACP, and STP, this switch provides advanced networking features to help you manage your network more efficiently.
Nexus 2232PP Fabric Extender – 32x (1/10) GE (SFP/SFP+) + 8x10GE (SFP+) Module, 2PS, 1 Fan Module, Cisco parent switches Cisco Nexus (5000, 6000, 7000, or n9000) Series
- Reduces data center cabling costs and footprint with optimized inter-rack cabling
- Unified fabric and FCoE at the server access layer reduce capital expenditure and operating expenses
- Virtual Port Channel (vPC) and in-service software upgrades (ISSU) Increase resilience
- Virtual machine aware network services facilitate quick expansion of network capacity
HP J8693A Procurve 3500yl-48G-PWR Switch: 48 Gigabit Ports, 1U, PoE, L3/L4
HP J8693A Procurve 3500yl-48G-PWR switch is a 48-port Gigabit Ethernet switch with Power over Ethernet (PoE) capabilities, housed in a 1U form factor. It is a layer 3 (L3) and layer 4 (L4) switch, offering advanced routing and network management capabilities.
- 48 Gigabit Ethernet ports
- Power over Ethernet (PoE) capability
- 1U form factor for efficient use of rack space
- L3/L4 switching for advanced routing and network management
- Support for layer 3 static and RIP routing, and layer 4 access control lists (ACLs)
- Support for VLANs, QoS, and Link Aggregation Control Protocol (LACP)
- IPv6 support for future-proofing your network.
HP StorageWorks 8/20q Fibre Channel Switch-20*8Gb FC-1 U- (AK241)
- 20 x 8Gb Fibre Channel Ports
- Hot-swappable 8 Gbps SFP optical transceivers
- Non-Disruptive Code Load and Activation (NDCLA)
- Drag-and-drop zoning
- Adaptive trunking, intelligent path selection
- It allows the user to view two saved configurations and compare the differences
- Transparent Routing (TR) technology – Seamless operation: HP B and C-series SANs
- Integrated end-to-end management-server to storage
Recently Viewed
Arista AS7312-54X switch & 10 Gbic 10G Multi mode
📌Arista AS7312-54X switch
■ Switch Ports:
-48 x 25G SFP28 plus 6 x 100G QSFP28 ports
-Each SFP28 supports 1 x 10 G or 25 GbE
-Each QSFP28 supports 1×40/100 GbE or 4 x 25 GbE or
-4 x 10 GbE per port using splitter cables
📌 10 Gbic 10G Multi mode
🥇1 YEAR WARRANTY 🥇
Cisco Meraki (MR33) Wireless Access Point
- 2×2 MU-MIMO 802.11ac Wave 2
- 1.3 Gbps* aggregate dual-band frame rate
- 24×7 real-time WIPS/WIDS, spectrum analytics, and WiFi
- location tracking via dedicated 3rd radio
- Integrated Bluetooth Low Energy Beacon and scanning radio
- Integrated enterprise security and guest access
- Self-configuring, plug-and-play deployment
Reviews
There are no reviews yet.