– 24 Fibre Channel universal ports with 1, 2, and 4 Gbit/s full duplex. 8 port base and expandable in 8 port increments.
– Full line-speed switching and auto-sensing of 1, 2, 4, and 8 Gbps port speeds
– Enhanced Transmission Selection
– ISL Trunking up to eight 8Gb/s ports per ISL Trunk, for a single Trunk up to 68 Gb/s (8 ports x 8.5 Gb/s).
– Fibre Channel media type: Hot-plug, standard Small Form Factor Pluggable (SFP) and SFP+, LC connector
– 1 USB port for firmware, supportSave, and config backup and restore
DS-300B: Brocade – EMC 8/24-port 8 Gbit/sec SAN switch + 8 Gbic 8G Free
EGP12,499
Only logged in customers who have purchased this product may leave a review.
Related products
HP ProCurve 4208vl Switch – 140*1GbE Gigabit Ports – 28*1 GbE SFP – 7 Modulars ( J9033A)
- Layer 2 and Layer 3 lite feature set
- Scalable 10/100/1000 connectivity
- Uni-Directional Link Detection (UDLD)
- Layer 2 switching , Layer 3 routing
- Dynamic ARP protection
- Source-port filtering
- Multiple user authentication methods
Cisco Catalyst 3650 Switch – 24*1GB Ports – 4*1GB SFP Uplinks – L3 – Managed- Stackable Switch
- The Cisco Catalyst 3650 Series Switch, with Cisco StackWise-160 Technology, can stack 9 switches and support up to 160 Gpbs stack bandwidth.
- The Cisco 3650 Catalyst Switch is the next generation of enterprise-class standalone and stackable (optional) access-layer switches that provide the foundation for full convergence between wired and wireless on a single platform.
- The Cisco Catalyst 3650 is built on the advanced Cisco StackWise-160, and takes advantage of the new Cisco Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC).
- This Cisco 3650 Catalyst switch can enable uniform wired-wireless policy enforcement.
HPE FlexNetwork 5130 JH325A – L3 – Managed – 24 Ports PoE+ 4x 10G SFP+
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports
- Fixed 10GbE ports for high-speed stacking or uplinks
- Provide higher efficiency in IP phone, wireless access point
- Support for multiple services
- Comprehensive security control policies
- Diversified quality of service (QoS) policies
- Excellent manageability
HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
HP V1910-24G POE (JE007A) Switch – 24 Gigabit Ethernet Ports – 4 SFP – Layer 3 Static Routing
- The HP V1910-24G switch is a powerful networking device that offers 24 Gigabit Ethernet ports for fast and reliable connectivity.
- The switch also supports Layer 3 static routing, which allows you to route traffic between different networks and subnets.
- Web-based management and a command-line interface (CLI) make it easy to configure and manage the switch.
- With support for VLANs, LACP, and STP, this switch provides advanced networking features to help you manage your network more efficiently.
Peplink Balance 380 Multi-WAN Router
- Up to 7 advanced load balancing for faster, more responsive networking
- Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
- Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
- IPsec/L2TP/PPTP VPN Functionality
- Advanced QoS Functionality
- IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices
HPE OfficeConnect 1920 series (JG927a) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
HP 5500 series Switch (JG542A) -POE+ – L3-Managed – 48*1GB Ethernet Ports-4*1GB SFP 2*10GB SFP+ – Dual Power Supply
- The HP 5500 series switch delivers unrivaled resiliency, security, and multi-service capabilities at the edge of branch and large campus networks
- 48 auto-sensing GigabitEthernet PoE+ ports
- 4 fixed GbE SFP ports, 2* 10GbE SFP+ ports
- 1 GB SDRAM, Packet buffer capacity: 6 MB and 512 MB flash
- 224 Gb/s routing/switching performance
- Stacking capability – IRF, 9 switches
NETGEAR ProSAFE JGS524 24-Port Gigabit Ethernet Unmanaged Switch with Auto-Uplink
- 10/100/1000Base-T gigabit technology for high-speed network connectivity
- Rackmountable design for easy installation in a server room or data center
- Plug and play functionality for easy setup and immediate use
- Auto Uplink™️ feature automatically detects and adjusts for straight-through or crossover cables
- Energy-saving auto power-down mode for ports not in use
- Compatible with a wide range of 10-, 100-, and 1000-Mbps devices for versatile network integration
- Compact size for desktop placement or standard 19-inch rack mounting.
HPE OfficeConnect 1920 series (JG924a) Switch – 24 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
CISCO N5K-C5548UP-FA – Nexus 5548 UP
Cisco Nexus 5548UP. Switch type: Managed, Switch layer: L2/L3. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000), Basic switching RJ-45 Ethernet ports quantity: 32, Console port: RJ-45. MAC address table: 32000 entries. Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w,…. Rack mounting, Form factor: 1U
Recently Viewed
50 Switch Cisco 3650 48P 1G PoE+ +4 Core Switch Cisco Nexus FREE
عدد (50)
📌Cisco 3650 48p 1G PoE+
-48Port 1G PoE+
-Layer 3 Switch
-4Port SFP
-Power Supply 1025W
-With Rackmounts
🔥FREE🔥
📌Cisco WS-C4500X-16SFP+
📌Cisco Nexus 9372PX
48 Port SFP+ 10G
6 Port QSFP+
📌Cisco Nexus N5K-C5596UP Switch 48x 1/10Gbps SFP+ Unified Ports
📌Cisco Nexus 5548UP – switch – 32 port SFP+ 10G – Managed – Rack-Mountable
HPE Proliant DL 360 G9 V4
– Dual Processor / Intel Xeon E5-2680 V4
– Ram 32G -ECC – DDR4
– Raid Controller P440ar 2GB Flash-Backed Write Cache + Battery
– Storage 3*3TB SAS Enterprise ( New in box )
– 4 Port Lan Ethernet 10/100/1000 RJ45 + 2 Port FLR-QSFP 40G G9 Adapter
– Dual power supply ( 1400 Watt ) Turbo
Dell Wyse 7020 Thin Client
Dell Wyse 7020 Thin Client is build for power users and knowledge workers, these Windows 10 IoT Enterprise thin client is optimized for demanding work loads. Powered by a Quad core AMD G- Series processor, it’s more than capable of driving a wide range of applications, including graphic intensive workloads and higher-end graphics, to all of your power users and knowledge workers.
15 Switch Cisco 3650 48P 1G PoE+ + Cisco Nexus 5548UP 32 port SFP+ 10G
Q:15
Cisco 3650 24P 1G PoE+
24 port 1G POE+
Layer 3 Switch
4Port SFP
With Rackmounts
Cisco Nexus 5548UP – switch – 32 port SFP+ 10G – Managed – Rack-Mountable
Cisco Nexus N9K-C9372TX-E
48 Port RJ45 10G
6port QSFP 40G
Layer 3 switch
Reviews
There are no reviews yet.