– 24 Fibre Channel universal ports with 1, 2, and 4 Gbit/s full duplex. 8 port base and expandable in 8 port increments.
– Full line-speed switching and auto-sensing of 1, 2, 4, and 8 Gbps port speeds
– Enhanced Transmission Selection
– ISL Trunking up to eight 8Gb/s ports per ISL Trunk, for a single Trunk up to 68 Gb/s (8 ports x 8.5 Gb/s).
– Fibre Channel media type: Hot-plug, standard Small Form Factor Pluggable (SFP) and SFP+, LC connector
– 1 USB port for firmware, supportSave, and config backup and restore
DS-300B: Brocade – EMC 8/24-port 8 Gbit/sec SAN switch + 8 Gbic 8G Free
Only logged in customers who have purchased this product may leave a review.
Related products
HP ProCurve 1400-24G (J9078A)- Gigabit Ethernet
The HP 1400-24G (J9078A) is a 24 port Ethernet switch designed to be as simple as possible. The J9078A switch is an “unmanaged” switch meaning it auto-configures itself for you. The HP 1400-24G was designed without fans making it one of the quietest switches available. The J9078A is the perfect choice for those lacking a dedicated server room.
Lenovo RackSwitch G8272 – 48x10Gb (SFP/SFP+) Ports – 6x40Gb(QSFP+) Ports – Layer 3 – Managed – Dual Power supply – Rear-to-Front Airflow
- The Enterprise NOS (ENOS) has a feature-rich design with virtualization, high availability, and enterprise class Layer 2 and Layer 3 functionality.
- It supports Network virtualization VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.
- Advanced Layer 2/3/4 switching and routing capabilities, including Virtual Router Redundancy Protocol (VRRP), Border Gateway Protocol (BGP), and Equal-Cost Multipath (ECMP)
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- Support for OpenFlow 1.3 and 1.4 for software-defined networking (SDN) applications
- Hot-swappable power supplies and fan modules for high availability and easy maintenance
NETGEAR ProSAFE JGS524 24-Port Gigabit Ethernet Unmanaged Switch with Auto-Uplink
- 10/100/1000Base-T gigabit technology for high-speed network connectivity
- Rackmountable design for easy installation in a server room or data center
- Plug and play functionality for easy setup and immediate use
- Auto Uplink™️ feature automatically detects and adjusts for straight-through or crossover cables
- Energy-saving auto power-down mode for ports not in use
- Compatible with a wide range of 10-, 100-, and 1000-Mbps devices for versatile network integration
- Compact size for desktop placement or standard 19-inch rack mounting.
TP-Link (TL-SG1024D) Switch – 24 Gigabit Ethernet Ports, Layer 2,Plug & Play
- 24 Gigabit Ethernet Ports.
- Supports MAC address auto-learning and auto-aging
- 8K MAC address table, 12.8 Gbps switching capacity.
- 13-inch steel case, suitable for rack-mounting or desktop installation.
- Plug and play design simplifies installation.
- Fanless design ensures quiet operation.
NETGEAR Switch ProSafe (GSM 7224)-24 x1Gigabit Ethernet -Layer 2 Switch
- The Netgear GSM7224 is in the ProSafe family of Netgear switches, providing enterprise-class performance and reliability at an affordable price. The Netgear switch has twenty-four Gigabit Ethernet ports (10/100/1000 Mbps) as well as four SFP combo ports. The combo ports are used for stacking and linking additional equipment, allowing your network to grow as your business does. Popular features of the GSM7224 ProSafe switch are VLAN support, Layer 2, managed, Quality of Service
- 24 Ports ,Gigabit Ethernet
- 4 SFP Combo Ports
- Layer 2, Managed
- Quality of Service (QoS),VLAN Support
- 48 Gbps Non-Blocking Bandwidth
- Telnet Remote Management
TP-Link (TL-SG1024) Switch – 24 Gigabit Ethernet Ports, Unmanaged, Layer 2
- The TL-SG1024 Gigabit Ethernet Switch provides you with a high-performance, low-cost, Easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network.
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Innovative energy-efficient technology saves power consumption
- Supports MAC address self-learning and auto MDI/MDIX
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
Dell Switch (5424) -24 x 1 Gigabit Ethernet
- 24 10/100/1000BASE-T auto-sensing Gigabit Ethernet switching ports
- 4 SFP combo slots for fiber media support (Note: SFP slots are used instead of the built-in 10/100/1000BaseT ports)
- Auto-negotiation for speed, duplex mode and flow control
- Auto MDI/MDIX Port mirroring Broadcast storm control
- Switch Fabric Capacity 48.0 Gbps
- Forwarding Rate 35.6 Mpps
- Up to 8,000 MAC Addresses
HP 5500 series Switch (JG542A) -POE+ – L3-Managed – 48*1GB Ethernet Ports-4*1GB SFP 2*10GB SFP+ – Dual Power Supply
- The HP 5500 series switch delivers unrivaled resiliency, security, and multi-service capabilities at the edge of branch and large campus networks
- 48 auto-sensing GigabitEthernet PoE+ ports
- 4 fixed GbE SFP ports, 2* 10GbE SFP+ ports
- 1 GB SDRAM, Packet buffer capacity: 6 MB and 512 MB flash
- 224 Gb/s routing/switching performance
- Stacking capability – IRF, 9 switches
NEC QX-S1024GT-4G 24-Port Gigabit Ethernet Switch with Managed L2 Features, GUI Management, and Fanless Silent Design [Brand New, Packaging not included]
- Ease of use (WEB GUI or CLI)
- Fanless silent design
- Supports Energy Efficient Ethernet (EEE) function, which is an energy-saving function
- Achieves advanced QoS with 8-class priority control queue, bandwidth control, and PQ/WRR scheduling based on CoS/DSCP
- IEEE802.1X authentication/MAC address authentication prohibits communication from unauthorized terminals
- Supports IGMPv1/v2/v3 snooping as a multicast function
- Filtering by access control list (ACL) by MAC address, IP address, etc. is possible
- Supports link aggregation (LACP support), multi-port loop detection, and port mirroring functions
- SNMPv1/v2c/v3, alive monitoring by ping response is possible
- Supports management functions such as telnet/ssh/ftp/tftp/ntp client/syslog/web console
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
Cisco Catalyst 2970G-24T-E – 24 Gigabit Ethernet Ports- 4 * 1 GB SFP – Managed
- The Catalyst 2970 features robust security features, including port security, Access Control Lists (ACLs), and support for 802.1X authentication.
- It supports advanced Quality of Service (QoS) features to prioritize and manage network traffic based on application and user needs
- The switch supports multiple VLANs, enabling network administrators to segment traffic by department, function, or application.
Recently Viewed
Arista AS7312-54X switch & HPE 5130-24G-SFP-4SFP+ (JG933A)
⚫Arista AS7312-54X switch
■ Switch Ports:
* 48 x 25G SFP28 plus 6 x 100G QSFP28 ports:
* Each SFP28 supports 1 x 10 G or 25 GbE
* Each QSFP28 supports 1×40/100 GbE or 4 x 25 GbE or
* 4 x 10 GbE per port using splitter cables
________________________________________
⚫HPE 5130-24G-SFP-4SFP+ (JG933A)
*24 port SFP 1G
*8 port RJ45 1 G
*4 Port SFP+ 10G
*Dual Power supply
WITH RACKMOUNTS
Arista AS7312-54X switch & JUNIPER – EX3300 48port POE+ 4port SFP+ 10G
⚫Arista AS7312-54X switch
■ Switch Ports:
* 48 x 25G SFP28 plus 6 x 100G QSFP28 ports:
* Each SFP28 supports 1 x 10 G or 25 GbE
* Each QSFP28 supports 1×40/100 GbE or 4 x 25 GbE or
* 4 x 10 GbE per port using splitter cables
⚫JUNIPER – EX3300 48port POE+ 4port SFP+ 10G
* 48 port 1G POE+
* 4 port SFP+ 10G
* Layer 3 Switch
* With Rackmounts




















Reviews
There are no reviews yet.