– 24 Fibre Channel universal ports with 1, 2, and 4 Gbit/s full duplex. 8 port base and expandable in 8 port increments.
– Full line-speed switching and auto-sensing of 1, 2, 4, and 8 Gbps port speeds
– Enhanced Transmission Selection
– ISL Trunking up to eight 8Gb/s ports per ISL Trunk, for a single Trunk up to 68 Gb/s (8 ports x 8.5 Gb/s).
– Fibre Channel media type: Hot-plug, standard Small Form Factor Pluggable (SFP) and SFP+, LC connector
– 1 USB port for firmware, supportSave, and config backup and restore
DS-300B: Brocade – EMC 8/24-port 8 Gbit/sec SAN switch + 8 Gbic 8G Free
Only logged in customers who have purchased this product may leave a review.
Related products
Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply
- The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .
- It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.
- The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.
- The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.
- The switch also includes replaceable dual power supply units and a fan tray module.
HP A5120 EI Switch Series (JG245A), Layer 3, Managed Gigabit Ethernet switch with 24 10/100/1000 BaseT ports (NEW)
- Provides Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.
- Offers high scalability with two expansion slots that can support two-port 10GbE expansion modules.
- Features Unique Intelligent Resilient Framework (IRF) technology for creating virtual fabrics by virtualizing multiple switches into a single logical device.
- Provides high availability, simplified management, and comprehensive security
TP-Link (TL-SG1024D) Switch – 24 Gigabit Ethernet Ports, Layer 2,Plug & Play
- 24 Gigabit Ethernet Ports.
- Supports MAC address auto-learning and auto-aging
- 8K MAC address table, 12.8 Gbps switching capacity.
- 13-inch steel case, suitable for rack-mounting or desktop installation.
- Plug and play design simplifies installation.
- Fanless design ensures quiet operation.
HPE OfficeConnect 1920s Series (JL381A) Switch – 24 Gigabit Ports – 2*1Gb SFP– Layer 2
- The HP OfficeConnect 1920S Series (JL381A) is a smart-managed Layer 2 switch designed for small and medium-sized businesses.
- The JL381A switch is designed to deliver wire-speed gigabit Ethernet connectivity with up to 80 Gbps switching capacity and up to 59.5 Mpps throughput.
- The switch supports both web-based and command-line interface (CLI) management, as well as SNMP, RMON, and LLDP protocols for network monitoring and control.
- The switch provides advanced security features such as Access Control Lists (ACLs), 802.1X port authentication, and MAC-based authentication to protect the network from unauthorized access and attacks.
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
HP ProCurve 1400-24G (J9078A)- Gigabit Ethernet
The HP 1400-24G (J9078A) is a 24 port Ethernet switch designed to be as simple as possible. The J9078A switch is an “unmanaged” switch meaning it auto-configures itself for you. The HP 1400-24G was designed without fans making it one of the quietest switches available. The J9078A is the perfect choice for those lacking a dedicated server room.
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
HPE FlexNetwork 5130 JH325A – L3 – Managed – 24 Ports PoE+ 4x 10G SFP+
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports
- Fixed 10GbE ports for high-speed stacking or uplinks
- Provide higher efficiency in IP phone, wireless access point
- Support for multiple services
- Comprehensive security control policies
- Diversified quality of service (QoS) policies
- Excellent manageability
Cisco Catalyst 3650 Switch – 24*1GB Ports – 4*1GB SFP Uplinks – L3 – Managed- Stackable Switch
- The Cisco Catalyst 3650 Series Switch, with Cisco StackWise-160 Technology, can stack 9 switches and support up to 160 Gpbs stack bandwidth.
- The Cisco 3650 Catalyst Switch is the next generation of enterprise-class standalone and stackable (optional) access-layer switches that provide the foundation for full convergence between wired and wireless on a single platform.
- The Cisco Catalyst 3650 is built on the advanced Cisco StackWise-160, and takes advantage of the new Cisco Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC).
- This Cisco 3650 Catalyst switch can enable uniform wired-wireless policy enforcement.
Lenovo RackSwitch G8332 – 32 * 40 Gigabit (QSFP+), 2.56 Tbps throughput, Full-featured L2 and L3, Managed
- Lenovo RackSwitch G8332 is a 1U rack-mountable aggregation switch used for combining traffic from multiple high-speed server racks. It has 32 QSFP+ ports,
- Ultra-low latency and 2.56 Tbps throughput. It is an enterprise-class, full-featured L2 and L3 data center switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data.
- It supports 10 Gigabit Ethernet, 40 Gigabit Ethernet, Converged Enhanced Ethernet (CEE/DCB), and iSCSI configurations.
- The switch uses a wire-speed, non-blocking switching fabric that provides simultaneous wire-speed transport of multiple packets at low latency on all ports.
- The switch has exceptional port density and flexibility with break-out cables, and can support up to 96x 10 Gigabit Ethernet connections and still have 8x 40 Gigabit Ethernet uplinks.
3Com Switch 2824 (CBlUG24)- 24 x 1Gigabit Ethernet
24 autosensing 10/100/1000 Ethernet Standards conformance: ISO 8802-3, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.1d (bridging), IEEE 802.3x (flow control), IEEE 802.3ab (Gigabit Ethernet) Media interfaces: 10/100/1000BASE-TX/RJ-45 Switching features: Store-and-forward; full-/half-duplex auto-negotiation; Class-of-Service (CoS) 802.1p traffic prioritization (priority queuing) MAC addresses: 32,000 LED indicators: Power, network traffic/duplex mode, link status/speed Electrical power: Power inlet: IEC 320 AC line frequency: 50/60 Hz Input voltage: 100-240 VAC Current rating: 1A, max Maximum power consumption: 21W Maximum power
Recently Viewed
Dell PowerConnect 5524 2SFP+10G WITH 2 GBICS 10G FREE 🎁
24 Port 1G
2 x 10G SFP+
WITH 2 GBICS 10G FREE 🎁
Brocade 6520 – 96-Port 16 Gb Fibre Channel Switch
HPE 8/8 (8) Full Fabric Ports Enabled SAN Switch + 8Gbic 8G Free
8 x 8Gb Fibre Channel SFP+
16 x 8Gb Fibre Channel SFP+ Ports on Demand

























Reviews
There are no reviews yet.