DS-300B: Brocade &#8211; EMC 8/24-port 8 Gbit/sec SAN switch + 8 Gbic 8G Free

SKU: 5015 Categories: Switches, Fibre Switches Tags: Brocade, DS-300B, EMC 8/24-port, SAN Switch Brand: Brocade

Description
Reviews (0)

Description

– 24 Fibre Channel universal ports with 1, 2, and 4 Gbit/s full duplex. 8 port base and expandable in 8 port increments.
– Full line-speed switching and auto-sensing of 1, 2, 4, and 8 Gbps port speeds
– Enhanced Transmission Selection
– ISL Trunking up to eight 8Gb/s ports per ISL Trunk, for a single Trunk up to 68 Gb/s (8 ports x 8.5 Gb/s).
– Fibre Channel media type: Hot-plug, standard Small Form Factor Pluggable (SFP) and SFP+, LC connector
– 1 USB port for firmware, supportSave, and config backup and restore

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Lenovo RackSwitch G8272 – 48x10Gb (SFP/SFP+) Ports – 6x40Gb(QSFP+) Ports – Layer 3 – Managed – Dual Power supply – Rear-to-Front Airflow

Rated 0 out of 5

(0)

Highlight

The Enterprise NOS (ENOS) has a feature-rich design with virtualization, high availability, and enterprise class Layer 2 and Layer 3 functionality.

It supports Network virtualization VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.

Advanced Layer 2/3/4 switching and routing capabilities, including Virtual Router Redundancy Protocol (VRRP), Border Gateway Protocol (BGP), and Equal-Cost Multipath (ECMP)

The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.

Support for OpenFlow 1.3 and 1.4 for software-defined networking (SDN) applications

Hot-swappable power supplies and fan modules for high availability and easy maintenance

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

Dell Switch (5424) -24 x 1 Gigabit Ethernet

Rated 0 out of 5

(0)

Highlight

24 10/100/1000BASE-T auto-sensing Gigabit Ethernet switching ports
4 SFP combo slots for fiber media support (Note: SFP slots are used instead of the built-in 10/100/1000BaseT ports)
Auto-negotiation for speed, duplex mode and flow control
Auto MDI/MDIX Port mirroring Broadcast storm control
Switch Fabric Capacity 48.0 Gbps
Forwarding Rate 35.6 Mpps
Up to 8,000 MAC Addresses

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

3Com Switch 2824 (CBlUG24)- 24 x 1Gigabit Ethernet

Rated 0 out of 5

(0)

Highlight

24 autosensing 10/100/1000 Ethernet Standards conformance: ISO 8802-3, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.1d (bridging), IEEE 802.3x (flow control), IEEE 802.3ab (Gigabit Ethernet) Media interfaces: 10/100/1000BASE-TX/RJ-45 Switching features: Store-and-forward; full-/half-duplex auto-negotiation; Class-of-Service (CoS) 802.1p traffic prioritization (priority queuing) MAC addresses: 32,000 LED indicators: Power, network traffic/duplex mode, link status/speed Electrical power: Power inlet: IEC 320 AC line frequency: 50/60 Hz Input voltage: 100-240 VAC Current rating: 1A, max Maximum power consumption: 21W Maximum power

Lenovo RackSwitch G8332 – 32 * 40 Gigabit (QSFP+), 2.56 Tbps throughput, Full-featured L2 and L3, Managed

Rated 0 out of 5

(0)

Highlight

Lenovo RackSwitch G8332 is a 1U rack-mountable aggregation switch used for combining traffic from multiple high-speed server racks. It has 32 QSFP+ ports,
Ultra-low latency and 2.56 Tbps throughput. It is an enterprise-class, full-featured L2 and L3 data center switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data.
It supports 10 Gigabit Ethernet, 40 Gigabit Ethernet, Converged Enhanced Ethernet (CEE/DCB), and iSCSI configurations.
The switch uses a wire-speed, non-blocking switching fabric that provides simultaneous wire-speed transport of multiple packets at low latency on all ports.
The switch has exceptional port density and flexibility with break-out cables, and can support up to 96x 10 Gigabit Ethernet connections and still have 8x 40 Gigabit Ethernet uplinks.

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

NETGEAR Switch (GS724t) – 24 x 1 Gigabit Ethernet

Rated 0 out of 5

(0)

Highlight

Product Description NETGEAR GS724T – switch – 24 ports Device Type Switch Form Factor External – 1 U
Ports Qty 24 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T Data Transfer Rate 1 Gbps
Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet Empty Slots 2 x SFP (mini-GBIC)

Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply

Rated 0 out of 5

(0)

Highlight

The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .

It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.

The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.

The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.

The switch also includes replaceable dual power supply units and a fan tray module.

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

NEC QX-S1024GT-4G 24-Port Gigabit Ethernet Switch with Managed L2 Features, GUI Management, and Fanless Silent Design [Brand New, Packaging not included]

Rated 0 out of 5

(0)

Highlight

Ease of use (WEB GUI or CLI)
Fanless silent design
Supports Energy Efficient Ethernet (EEE) function, which is an energy-saving function
Achieves advanced QoS with 8-class priority control queue, bandwidth control, and PQ/WRR scheduling based on CoS/DSCP
IEEE802.1X authentication/MAC address authentication prohibits communication from unauthorized terminals
Supports IGMPv1/v2/v3 snooping as a multicast function
Filtering by access control list (ACL) by MAC address, IP address, etc. is possible
Supports link aggregation (LACP support), multi-port loop detection, and port mirroring functions
SNMPv1/v2c/v3, alive monitoring by ping response is possible
Supports management functions such as telnet/ssh/ftp/tftp/ntp client/syslog/web console

Lenovo RackSwitch NE10032 – 32 Ports of 40GbE or 100GbE ( QSFP+/QSFP28) – Layer 3 – Managed

Rated 0 out of 5

(0)

Highlight

Cloud and virtualization solutions with VM-aware network automation and integration into Lenovo and third-party IT and cloud infrastructure management tools

The 10 Gb/25 Gb/40 Gb/100 Gb Ethernet NE10032 RackSwitch provides a combination of low latency, non-blocking line-rate switching, and ease of management with 6.4 Tbps throughput.

The NE10032 RackSwitch includes Layer 3 functionality, which provides security and performance benefits, as inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers

The NE10032 switch supports VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

TP-Link (TL-SG1024D) Switch – 24 Gigabit Ethernet Ports, Layer 2,Plug & Play

Rated 0 out of 5

(0)

Highlight

24 Gigabit Ethernet Ports.
Supports MAC address auto-learning and auto-aging
8K MAC address table, 12.8 Gbps switching capacity.
13-inch steel case, suitable for rack-mounting or desktop installation.
Plug and play design simplifies installation.
Fanless design ensures quiet operation.

Switches, 1G PoE, 24 Port 1G PoE, Ethernet Switches, PoE, Uplink 1G | 24 Port 1G PoE

Cisco Catalyst 3650 Switch – 241GB Ports – 41GB SFP Uplinks – L3 – Managed- Stackable Switch

Rated 0 out of 5

(0)

Highlight

The Cisco Catalyst 3650 Series Switch, with Cisco StackWise-160 Technology, can stack 9 switches and support up to 160 Gpbs stack bandwidth.
The Cisco 3650 Catalyst Switch is the next generation of enterprise-class standalone and stackable (optional) access-layer switches that provide the foundation for full convergence between wired and wireless on a single platform.
The Cisco Catalyst 3650 is built on the advanced Cisco StackWise-160, and takes advantage of the new Cisco Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC).
This Cisco 3650 Catalyst switch can enable uniform wired-wireless policy enforcement.

Switches, 1G PoE, 48 Port 1G PoE, Ethernet Switches, PoE, Uplink 10G | 48 Port 1G PoE

HP 5500 series Switch (JG542A) -POE+ – L3-Managed – 481GB Ethernet Ports-41GB SFP 2*10GB SFP+ – Dual Power Supply

Rated 0 out of 5

(0)

Highlight

The HP 5500 series switch delivers unrivaled resiliency, security, and multi-service capabilities at the edge of branch and large campus networks
48 auto-sensing GigabitEthernet PoE+ ports
4 fixed GbE SFP ports, 2* 10GbE SFP+ ports
1 GB SDRAM, Packet buffer capacity: 6 MB and 512 MB flash
224 Gb/s routing/switching performance
Stacking capability – IRF, 9 switches

Switches, 1G PoE, 24 Port 1G PoE, Ethernet Switches, PoE, Uplink 1G | 24 Port 1G PoE

HP V1910-24G POE (JE007A) Switch – 24 Gigabit Ethernet Ports – 4 SFP – Layer 3 Static Routing

Rated 0 out of 5

(0)

Highlight

The HP V1910-24G switch is a powerful networking device that offers 24 Gigabit Ethernet ports for fast and reliable connectivity.
The switch also supports Layer 3 static routing, which allows you to route traffic between different networks and subnets.
Web-based management and a command-line interface (CLI) make it easy to configure and manage the switch.
With support for VLANs, LACP, and STP, this switch provides advanced networking features to help you manage your network more efficiently.