– 24 Fibre Channel universal ports with 1, 2, and 4 Gbit/s full duplex. 8 port base and expandable in 8 port increments.
– Full line-speed switching and auto-sensing of 1, 2, 4, and 8 Gbps port speeds
– Enhanced Transmission Selection
– ISL Trunking up to eight 8Gb/s ports per ISL Trunk, for a single Trunk up to 68 Gb/s (8 ports x 8.5 Gb/s).
– Fibre Channel media type: Hot-plug, standard Small Form Factor Pluggable (SFP) and SFP+, LC connector
– 1 USB port for firmware, supportSave, and config backup and restore
DS-300B: Brocade – EMC 8/24-port 8 Gbit/sec SAN switch + 8 Gbic 8G Free
Only logged in customers who have purchased this product may leave a review.
Related products
NETGEAR Switch ( GS728TP) -24 x 1 Gigabit Ethernet POE
- Port Configuration- 28 ports, includes 24 gigabit ports and 4 x 1G SFP ports
- Power-Over-Ethernet- 24 PoE+ ports with 190W total power budget
- Flexibility From Uplink Ports- 4 x 1G SFP ports
- Advanced Configuration and Control- Management software with easy-to-use GUI interface offers refined control for secure setup, access, and SNMP (NMS 300) management.
- Energy Efficient- Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode.
- Built To Last- Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance
Aruba S2500 Mobility Access Switch-24P-4x10G SFP+ POE
The S2500 Mobility Access Switch from Aruba Networks® extends role-based user access, security and operational simplicity to wired networks.
A vital part of Aruba Mobility-Defined NetworksTM, the S2500 delivers secure, virtualized access services to users, regardless of their location, access method, device or applications
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
NEC QX-S1024GT-4G 24-Port Gigabit Ethernet Switch with Managed L2 Features, GUI Management, and Fanless Silent Design [Brand New, Packaging not included]
- Ease of use (WEB GUI or CLI)
- Fanless silent design
- Supports Energy Efficient Ethernet (EEE) function, which is an energy-saving function
- Achieves advanced QoS with 8-class priority control queue, bandwidth control, and PQ/WRR scheduling based on CoS/DSCP
- IEEE802.1X authentication/MAC address authentication prohibits communication from unauthorized terminals
- Supports IGMPv1/v2/v3 snooping as a multicast function
- Filtering by access control list (ACL) by MAC address, IP address, etc. is possible
- Supports link aggregation (LACP support), multi-port loop detection, and port mirroring functions
- SNMPv1/v2c/v3, alive monitoring by ping response is possible
- Supports management functions such as telnet/ssh/ftp/tftp/ntp client/syslog/web console
Lenovo RackSwitch G8332 – 32 * 40 Gigabit (QSFP+), 2.56 Tbps throughput, Full-featured L2 and L3, Managed
- Lenovo RackSwitch G8332 is a 1U rack-mountable aggregation switch used for combining traffic from multiple high-speed server racks. It has 32 QSFP+ ports,
- Ultra-low latency and 2.56 Tbps throughput. It is an enterprise-class, full-featured L2 and L3 data center switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data.
- It supports 10 Gigabit Ethernet, 40 Gigabit Ethernet, Converged Enhanced Ethernet (CEE/DCB), and iSCSI configurations.
- The switch uses a wire-speed, non-blocking switching fabric that provides simultaneous wire-speed transport of multiple packets at low latency on all ports.
- The switch has exceptional port density and flexibility with break-out cables, and can support up to 96x 10 Gigabit Ethernet connections and still have 8x 40 Gigabit Ethernet uplinks.
HP V1910-24G POE (JE007A) Switch – 24 Gigabit Ethernet Ports – 4 SFP – Layer 3 Static Routing
- The HP V1910-24G switch is a powerful networking device that offers 24 Gigabit Ethernet ports for fast and reliable connectivity.
- The switch also supports Layer 3 static routing, which allows you to route traffic between different networks and subnets.
- Web-based management and a command-line interface (CLI) make it easy to configure and manage the switch.
- With support for VLANs, LACP, and STP, this switch provides advanced networking features to help you manage your network more efficiently.
HPE OfficeConnect 1920s Series (JL381A) Switch – 24 Gigabit Ports – 2*1Gb SFP– Layer 2
- The HP OfficeConnect 1920S Series (JL381A) is a smart-managed Layer 2 switch designed for small and medium-sized businesses.
- The JL381A switch is designed to deliver wire-speed gigabit Ethernet connectivity with up to 80 Gbps switching capacity and up to 59.5 Mpps throughput.
- The switch supports both web-based and command-line interface (CLI) management, as well as SNMP, RMON, and LLDP protocols for network monitoring and control.
- The switch provides advanced security features such as Access Control Lists (ACLs), 802.1X port authentication, and MAC-based authentication to protect the network from unauthorized access and attacks.
HP 5500 series Switch (JG542A) -POE+ – L3-Managed – 48*1GB Ethernet Ports-4*1GB SFP 2*10GB SFP+ – Dual Power Supply
- The HP 5500 series switch delivers unrivaled resiliency, security, and multi-service capabilities at the edge of branch and large campus networks
- 48 auto-sensing GigabitEthernet PoE+ ports
- 4 fixed GbE SFP ports, 2* 10GbE SFP+ ports
- 1 GB SDRAM, Packet buffer capacity: 6 MB and 512 MB flash
- 224 Gb/s routing/switching performance
- Stacking capability – IRF, 9 switches
Lenovo RackSwitch NE10032 – 32 Ports of 40GbE or 100GbE ( QSFP+/QSFP28) – Layer 3 – Managed
- Cloud and virtualization solutions with VM-aware network automation and integration into Lenovo and third-party IT and cloud infrastructure management tools
- The 10 Gb/25 Gb/40 Gb/100 Gb Ethernet NE10032 RackSwitch provides a combination of low latency, non-blocking line-rate switching, and ease of management with 6.4 Tbps throughput.
- The NE10032 RackSwitch includes Layer 3 functionality, which provides security and performance benefits, as inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers
- The NE10032 switch supports VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.
Dell Switch (5424) -24 x 1 Gigabit Ethernet
- 24 10/100/1000BASE-T auto-sensing Gigabit Ethernet switching ports
- 4 SFP combo slots for fiber media support (Note: SFP slots are used instead of the built-in 10/100/1000BaseT ports)
- Auto-negotiation for speed, duplex mode and flow control
- Auto MDI/MDIX Port mirroring Broadcast storm control
- Switch Fabric Capacity 48.0 Gbps
- Forwarding Rate 35.6 Mpps
- Up to 8,000 MAC Addresses
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
HP StorageWorks 8/20q Fibre Channel Switch-20*8Gb FC-1 U- (AK241)
- 20 x 8Gb Fibre Channel Ports
- Hot-swappable 8 Gbps SFP optical transceivers
- Non-Disruptive Code Load and Activation (NDCLA)
- Drag-and-drop zoning
- Adaptive trunking, intelligent path selection
- It allows the user to view two saved configurations and compare the differences
- Transparent Routing (TR) technology – Seamless operation: HP B and C-series SANs
- Integrated end-to-end management-server to storage
Recently Viewed
Arista AS7312-54X switch & HPE 5130-24G-SFP-4SFP+ (JG933A)
⚫Arista AS7312-54X switch
■ Switch Ports:
* 48 x 25G SFP28 plus 6 x 100G QSFP28 ports:
* Each SFP28 supports 1 x 10 G or 25 GbE
* Each QSFP28 supports 1×40/100 GbE or 4 x 25 GbE or
* 4 x 10 GbE per port using splitter cables
________________________________________
⚫HPE 5130-24G-SFP-4SFP+ (JG933A)
*24 port SFP 1G
*8 port RJ45 1 G
*4 Port SFP+ 10G
*Dual Power supply
WITH RACKMOUNTS





















Reviews
There are no reviews yet.