LG iPecs Switch (ES-2026P) with 24 x 1Fast Ethernet and 2 SFP/Gigabit Ethernet Ports POE

Fibre Switches, Switches

Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed

Rated 0 out of 5

(0)

Highlight

The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
Advanced features such as QoS, ACLs, IPv6 support, and more
Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.

Easy management with web-based GUI and CLI interfaces

Switches, 1G PoE, 24 Port 1G PoE, Ethernet Switches, PoE, Uplink 1G | 24 Port 1G PoE

Cisco Catalyst 3650 Switch – 241GB Ports – 41GB SFP Uplinks – L3 – Managed- Stackable Switch

Rated 0 out of 5

(0)

Highlight

The Cisco Catalyst 3650 Series Switch, with Cisco StackWise-160 Technology, can stack 9 switches and support up to 160 Gpbs stack bandwidth.
The Cisco 3650 Catalyst Switch is the next generation of enterprise-class standalone and stackable (optional) access-layer switches that provide the foundation for full convergence between wired and wireless on a single platform.
The Cisco Catalyst 3650 is built on the advanced Cisco StackWise-160, and takes advantage of the new Cisco Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC).
This Cisco 3650 Catalyst switch can enable uniform wired-wireless policy enforcement.

Out Of Stock

Tripp Lite Auto-Transfer Switch PDU

Rated 0 out of 5

(0)

Highlight

Tripp Lite’s Auto-Transfer Switch PDU (Power Distribution Unit) automatically switches to a secondary power source in the event of a primary power failure. This ensures continuous, uninterruptible power to connected equipment and can help prevent data loss and equipment damage. This PDU can be used in a variety of settings, including data centers, server rooms, and network closets.

Switches, 1G PoE, 24 Port 1G PoE, Ethernet Switches, PoE, Uplink 10G | 24 Port 1G PoE

HPE FlexNetwork 5130 JH325A – L3 – Managed – 24 Ports PoE+ 4x 10G SFP+

Rated 0 out of 5

(0)

Highlight

24 RJ-45 autosensing 10/100/1000 PoE+ ports
Fixed 10GbE ports for high-speed stacking or uplinks
Provide higher efficiency in IP phone, wireless access point
Support for multiple services
Comprehensive security control policies
Diversified quality of service (QoS) policies
Excellent manageability

Switches, 1G PoE, 48 Port 1G PoE, Ethernet Switches, PoE, Uplink 10G | 48 Port 1G PoE

Brocade ICX 6610-48poe+, Switch-L3-Managed-48x 10/100/1000 + 8x SFP 10G + – Desktop, Rack Mountable

Rated 0 out of 5

(0)

Highlight

Delivers chassis-level performance and availability, providing an optimal user experience for streaming video, Virtual Desktop Infrastructure (VDI), Unified Communications (UC), and other mission-critical campus applications
Offers unprecedented stacking performance with 320 Gbps of stacking bandwidth
Provides unmatched availability with four fully redundant 40 Gbps stacking ports per switch, hitless stacking failover, hot switch replacement, and dual hot-swappable power supplies and fan assemblies
Simplifies network operations and protects investments with Brocade HyperEdge™ technology

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

NEC QX-S1024GT-4G 24-Port Gigabit Ethernet Switch with Managed L2 Features, GUI Management, and Fanless Silent Design [Brand New, Packaging not included]

Rated 0 out of 5

(0)

Highlight

Ease of use (WEB GUI or CLI)
Fanless silent design
Supports Energy Efficient Ethernet (EEE) function, which is an energy-saving function
Achieves advanced QoS with 8-class priority control queue, bandwidth control, and PQ/WRR scheduling based on CoS/DSCP
IEEE802.1X authentication/MAC address authentication prohibits communication from unauthorized terminals
Supports IGMPv1/v2/v3 snooping as a multicast function
Filtering by access control list (ACL) by MAC address, IP address, etc. is possible
Supports link aggregation (LACP support), multi-port loop detection, and port mirroring functions
SNMPv1/v2c/v3, alive monitoring by ping response is possible
Supports management functions such as telnet/ssh/ftp/tftp/ntp client/syslog/web console

Out Of Stock

ARUBA 7030 MOBILITY CONTROLLERS-8 Ports Combo (RJ-45&SFP) – 4096 Concurrent (Users/Devices) – Managed-1 U Rack-Mountable

Rated 0 out of 5

(0)

Highlight

Branch and Remote Networking Requirements
Zero-touch provisioning with limited IT assistance
Secure access to corporate resources across the hybrid WAN
Wireless and wired access for employees and guests
WAN optimization and availability
Policy-based routing and management
Unified architecture across all locations

Switches, 1G Non-PoE, 48 Port 1G Non PoE, Ethernet Switches, Non PoE

HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing

Rated 0 out of 5

(0)

Highlight

Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
Layer 3 static routing with 32 routes for network segmentation and expansion

Out Of Stock

Switches, Fibre Switches

Nexus 2232PP Fabric Extender – 32x (1/10) GE (SFP/SFP+) + 8x10GE (SFP+) Module, 2PS, 1 Fan Module, Cisco parent switches Cisco Nexus (5000, 6000, 7000, or n9000) Series

Rated 0 out of 5

(0)

Highlight

Reduces data center cabling costs and footprint with optimized inter-rack cabling
Unified fabric and FCoE at the server access layer reduce capital expenditure and operating expenses
Virtual Port Channel (vPC) and in-service software upgrades (ISSU) Increase resilience
Virtual machine aware network services facilitate quick expansion of network capacity

F5 (BIG-IP-1600) Series -41Gigabit Ethernet Ports- 21GB SFP- 4GB RAM – Dual Core Processor

Rated 0 out of 5

(0)

Highlight

F5 BIG-IP 1600 Global Traffic Manager (GTM) distributes DNS and user application requests based on business policies, data center and network conditions
BIG-IP GTM delivers F5’s high-performance DNS Services with visibility, reporting, and analysis
Scales and secures DNS responses geographically to survive DDoS attacks; delivers a complete, real-time DNSSEC solution

Switches, Fibre Switches

Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)

Rated 0 out of 5

(0)

Highlight

It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports

Out Of Stock

Peplink Balance 380 Multi-WAN Router

Rated 0 out of 5

(0)

Highlight

Up to 7 advanced load balancing for faster, more responsive networking
Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
IPsec/L2TP/PPTP VPN Functionality
Advanced QoS Functionality
IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices