NETGEAR GS748TS &#8211; 48 Port Gigabit Stackable Smart Switch &#8211; Managed

SKU: 3644 Category: Switches الوسوم: 48 Ports, NETGEAR GS748TS Brands: NETGEAR

الوصف
Reviews (0)

الوصف

48 x 10/100/1000 Mbps auto-sensing Gigabit Ethernet switching ports
4 built-in shared SFP Gigabit Ethernet fiber ports for 100/1000 Mbps connectivity
Auto-sensing and auto-negotiating capabilities for all copper ports
Auto Uplink™ feature ensures correct connections on all ports
Stack managed through a single IP address
Redundant stacking architecture for enhanced reliability
Independent high-speed connections with 20Gbps dual ring
Non-blocked architecture enables full line speed
Intuitive web GUI with auto-configuration
Stack master maintains configuration of all members
Hot-swappable stack for easy upgrades and maintenance
GS748TS units can be included in the same stack
Advanced security, QoS, traffic prioritization, and management features
Limited Lifetime Warranty for added peace of mind

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Fibre Switches, Switches

Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed

Rated 0 out of 5

(0)

Highlight

The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
Advanced features such as QoS, ACLs, IPv6 support, and more
Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.

Easy management with web-based GUI and CLI interfaces

Out Of Stock

Switches, 1G Non-PoE, 48 Port 1G Non PoE, Ethernet Switches, Non PoE

HPE OfficeConnect 1920 series (JG927a) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3

Rated 0 out of 5

(0)

Highlight

Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
Layer 3 static routing with 32 routes for network segmentation and expansion

HP ProCurve 4208vl Switch – 1401GbE Gigabit Ports – 281 GbE SFP – 7 Modulars ( J9033A)

Rated 0 out of 5

(0)

Highlight

Layer 2 and Layer 3 lite feature set
Scalable 10/100/1000 connectivity
Uni-Directional Link Detection (UDLD)
Layer 2 switching , Layer 3 routing
Dynamic ARP protection
Source-port filtering
Multiple user authentication methods

EGP29,999

Out Of Stock

Switches, 1G PoE, 48 Port 1G PoE, Ethernet Switches, PoE, Uplink 1G | 48 Port 1G PoE

HP J8693A Procurve 3500yl-48G-PWR Switch: 48 Gigabit Ports, 1U, PoE, L3/L4

Rated 0 out of 5

(0)

Highlight

HP J8693A Procurve 3500yl-48G-PWR switch is a 48-port Gigabit Ethernet switch with Power over Ethernet (PoE) capabilities, housed in a 1U form factor. It is a layer 3 (L3) and layer 4 (L4) switch, offering advanced routing and network management capabilities.

48 Gigabit Ethernet ports
Power over Ethernet (PoE) capability
1U form factor for efficient use of rack space
L3/L4 switching for advanced routing and network management
Support for layer 3 static and RIP routing, and layer 4 access control lists (ACLs)
Support for VLANs, QoS, and Link Aggregation Control Protocol (LACP)
IPv6 support for future-proofing your network.

F5 (BIG-IP-1600) Series -41Gigabit Ethernet Ports- 21GB SFP- 4GB RAM – Dual Core Processor

Rated 0 out of 5

(0)

Highlight

F5 BIG-IP 1600 Global Traffic Manager (GTM) distributes DNS and user application requests based on business policies, data center and network conditions
BIG-IP GTM delivers F5’s high-performance DNS Services with visibility, reporting, and analysis
Scales and secures DNS responses geographically to survive DDoS attacks; delivers a complete, real-time DNSSEC solution

EGP1,999

Out Of Stock

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

Aruba 2920-24G (J9726A) – 20x 1GbE Ports – 4x 1Gb SFP Combo Ports – Stacking – L3 – GUI Management

Rated 0 out of 5

(0)

Highlight

The Aruba 2920 Switch Series provides security, scalability, and ease of use for enterprise edge, SMB and branch office networks.
A powerful ProVision ASIC delivers low latency, more packet buffering, and adaptive power consumption
Aruba Layer 3 switch series with stacking, static & RIP routing, IPv6, ACLs, and sFlow.
Advanced security and network management tools with Aruba ClearPass Policy Manager and Aruba AirWave
Software-defined Network (SDN) Ready with OpenFlow support
Layer 4 prioritization Class of Service (CoS)

EGP6,500

Switches, 1G Non-PoE, 48 Port 1G Non PoE, Ethernet Switches, Non PoE

HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing

Rated 0 out of 5

(0)

Highlight

Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
Layer 3 static routing with 32 routes for network segmentation and expansion

Out Of Stock

ARUBA 7030 MOBILITY CONTROLLERS-8 Ports Combo (RJ-45&SFP) – 4096 Concurrent (Users/Devices) – Managed-1 U Rack-Mountable

Rated 0 out of 5

(0)

Highlight

Branch and Remote Networking Requirements
Zero-touch provisioning with limited IT assistance
Secure access to corporate resources across the hybrid WAN
Wireless and wired access for employees and guests
WAN optimization and availability
Policy-based routing and management
Unified architecture across all locations

47% OffOut Of Stock

Tripp Lite Auto-Transfer Switch PDU

Rated 0 out of 5

(0)

Highlight

Tripp Lite’s Auto-Transfer Switch PDU (Power Distribution Unit) automatically switches to a secondary power source in the event of a primary power failure. This ensures continuous, uninterruptible power to connected equipment and can help prevent data loss and equipment damage. This PDU can be used in a variety of settings, including data centers, server rooms, and network closets.

EGP1,999

Switches, 1G PoE, 48 Port 1G PoE, Ethernet Switches, PoE, Uplink 10G | 48 Port 1G PoE

HP 5500 series Switch (JG542A) -POE+ – L3-Managed – 481GB Ethernet Ports-41GB SFP 2*10GB SFP+ – Dual Power Supply

Rated 0 out of 5

(0)

Highlight

The HP 5500 series switch delivers unrivaled resiliency, security, and multi-service capabilities at the edge of branch and large campus networks
48 auto-sensing GigabitEthernet PoE+ ports
4 fixed GbE SFP ports, 2* 10GbE SFP+ ports
1 GB SDRAM, Packet buffer capacity: 6 MB and 512 MB flash
224 Gb/s routing/switching performance
Stacking capability – IRF, 9 switches

Switches, Fibre Switches

Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply

Rated 0 out of 5

(0)

Highlight

The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .

It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.

The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.

The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.

The switch also includes replaceable dual power supply units and a fan tray module.

Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE

HP A5120 EI Switch Series (JG245A), Layer 3, Managed Gigabit Ethernet switch with 24 10/100/1000 BaseT ports (NEW)

Rated 0 out of 5

(0)

Highlight

Provides Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.
Offers high scalability with two expansion slots that can support two-port 10GbE expansion modules.
Features Unique Intelligent Resilient Framework (IRF) technology for creating virtual fabrics by virtualizing multiple switches into a single logical device.
Provides high availability, simplified management, and comprehensive security