| Power Output | 2-2.4kW Single-Phase ATS/Switched PDU |
| Platform | LX Platform |
| Outlets | 200-240 V 10 C13 outlets, 2 C14 inlets, 3.6m cords, 1U rack mount design |
| Automatic Transfer Switching | Switches from primary to secondary power source in milliseconds |
| Remote Control and Monitoring | Switched C13 outlets are individually controllable for remote reboots and load shedding. Check essential functions at a glance |
| Part Number | PDUMH15HVATNET |
Tripp Lite Auto-Transfer Switch PDU
EGP1,999 EGP4,650
Out of Stock
Highlight
Compare
Tripp Lite’s Auto-Transfer Switch PDU (Power Distribution Unit) automatically switches to a secondary power source in the event of a primary power failure. This ensures continuous, uninterruptible power to connected equipment and can help prevent data loss and equipment damage. This PDU can be used in a variety of settings, including data centers, server rooms, and network closets.
الوصف
Related products
HPE FlexNetwork 5130 JH325A – L3 – Managed – 24 Ports PoE+ 4x 10G SFP+
Rated 0 out of 5
(0)
Highlight
- 24 RJ-45 autosensing 10/100/1000 PoE+ ports
- Fixed 10GbE ports for high-speed stacking or uplinks
- Provide higher efficiency in IP phone, wireless access point
- Support for multiple services
- Comprehensive security control policies
- Diversified quality of service (QoS) policies
- Excellent manageability
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
Rated 0 out of 5
(0)
Highlight
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
Juniper EX4200 Series 48Port POE L3/L4 Managed Switch
Rated 0 out of 5
(0)
Highlight
– 48*1Gbps include 8 ports power over Ethernet
– (2-port *10GbE SFP / 2-port *1GbE SFP) Uplink Module
– Supported web GUI management
– Dual Power supply
EGP8,399
ARUBA 7030 MOBILITY CONTROLLERS-8 Ports Combo (RJ-45&SFP) – 4096 Concurrent (Users/Devices) – Managed-1 U Rack-Mountable
Rated 0 out of 5
(0)
Highlight
- Branch and Remote Networking Requirements
- Zero-touch provisioning with limited IT assistance
- Secure access to corporate resources across the hybrid WAN
- Wireless and wired access for employees and guests
- WAN optimization and availability
- Policy-based routing and management
- Unified architecture across all locations
Edge-Core AS5610-52X- 48*10GB SFP+ – 4 QSFP+ – Layer 3 – Managed – Dual Power Supply
Rated 0 out of 5
(0)
Highlight
- The Edge-Core AS5610-52X hardware switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. .
- It provides full line-rate switching at Layer 2 or Layer 3 across 48 x 10G SFP+ ports and 4 x 40G QSFP uplinks.
- The AS5610-52X switch is a high-performance top-of-rack switch, designed for data center operating environments.
- The switch provides 48 10G Ethernet Small Form Factor Pluggable Plus (SFP+) transceiver slots, four 40G Quad-SFP+ (QSFP+) ports, and two 1G RJ-45 ports.
- The switch also includes replaceable dual power supply units and a fan tray module.
Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE
TP-Link (TL-SG1024) Switch – 24 Gigabit Ethernet Ports, Unmanaged, Layer 2
Rated 0 out of 5
(0)
Highlight
- The TL-SG1024 Gigabit Ethernet Switch provides you with a high-performance, low-cost, Easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network.
- All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Innovative energy-efficient technology saves power consumption
- Supports MAC address self-learning and auto MDI/MDIX
Peplink Balance 380 Multi-WAN Router
Rated 0 out of 5
(0)
Highlight
- Up to 7 advanced load balancing for faster, more responsive networking
- Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
- Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
- IPsec/L2TP/PPTP VPN Functionality
- Advanced QoS Functionality
- IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices
EGP2,499 EGP5,899
TP-Link (TL-SG1016 PE) Switch – 16 Gigabit Ethernet Ports , 8 Port (PoE+), Layer 2
Rated 0 out of 5
(0)
Highlight
- The TP-Link (TL-SG1016 PE) switch provides 16 Gigabit Ethernet ports, with PoE+ support on 8 of its ports.
- The PoE+ ports can provide up to 30 watts of power each, which is sufficient for most PoE-enabled devices.
- The switch supports VLANs, LACP, and STP, providing advanced networking features for network aggregation, improved performance, and loop prevention.
- The switch’s Energy-efficient Ethernet (EEE) compliance helps to reduce power consumption and operating costs.
EGP3,399
HP 5500 series Switch (JG542A) -POE+ – L3-Managed – 48*1GB Ethernet Ports-4*1GB SFP 2*10GB SFP+ – Dual Power Supply
Rated 0 out of 5
(0)
Highlight
- The HP 5500 series switch delivers unrivaled resiliency, security, and multi-service capabilities at the edge of branch and large campus networks
- 48 auto-sensing GigabitEthernet PoE+ ports
- 4 fixed GbE SFP ports, 2* 10GbE SFP+ ports
- 1 GB SDRAM, Packet buffer capacity: 6 MB and 512 MB flash
- 224 Gb/s routing/switching performance
- Stacking capability – IRF, 9 switches
HPE OfficeConnect 1920 series (JL382A) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3 – Static Routing
Rated 0 out of 5
(0)
Highlight
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Switches, 1G Non-PoE, 24 Port 1G Non-PoE, Ethernet Switches, Non PoE, Uplink 1G | 24 Port 1G Non-PoE
HP A5120 EI Switch Series (JG245A), Layer 3, Managed Gigabit Ethernet switch with 24 10/100/1000 BaseT ports (NEW)
Rated 0 out of 5
(0)
Highlight
- Provides Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.
- Offers high scalability with two expansion slots that can support two-port 10GbE expansion modules.
- Features Unique Intelligent Resilient Framework (IRF) technology for creating virtual fabrics by virtualizing multiple switches into a single logical device.
- Provides high availability, simplified management, and comprehensive security
HPE OfficeConnect 1920 series (JG927a) Switch – 48 Gigabit Ports – 4*1GB SFP- Managed – Layer 3
Rated 0 out of 5
(0)
Highlight
- Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access.
- The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
- Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
- All 48 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.
- Layer 3 static routing with 32 routes for network segmentation and expansion
Recently Viewed
Dell PowerEdge R330 Rack Server 4 Bay 3.5 inch LFF💥
Rated 0 out of 5
(0)
Highlight
Dell PowerEdge R330 Rack Server 4 Bay 3.5 inch LFF💥
▪ Intel® Xeon® Processor E3-1240 v5 ( Max Turbo Frequency 3.90 GHz )
▪ Memory : 16GB ECC DDR4
▪ STORAGE : 4*4TB SAS Enterprise
▪ DUAL POWER SUPPLY
▪🥇1 YEAR WARRANTY Including ALL PARTS🥇
EGP24,300
HPE Proliant DL 360 G9 V4 8 Bay 2.5 inch
Rated 0 out of 5
(0)
Highlight
Dual processors / intel Xeon processor E5-2620 V3
CPU 15 MB Cache X2 / Total 30 MB Cache
Ram 32G – ECC – DDR4
Smart Array P140 Raid Controller 0/1/5/10
Storage 3*500G Enterprise
4 Port Lan Ethernet 10/100/1000 RJ45
Dual power supply
1 Year Warranty
EGP32,299
EN 
AR 