Only logged in customers who have purchased this product may leave a review.
Cisco 2960X 48Port 1G POE+ 740W – 2Port SFP+10G
Related products
Netgear M4300-28G – PoE+ – 24x1G, 2x10G BASE-T, 2xSFP+, Stackable, Layer 3 Managed Switches
- Expand your small to medium-sized business’s network capacity with the M4300-28G PoE+ 26-Port 1G/10G PoE+ Compliant Managed Network Switch from Netgear.
- This fully managed rackmount network switch includes Layer 2, 3, and 4 feature sets
- With 24 PoE+ you can provide power and data to IP cameras, access points, VoIP phones, and more.
- The M4300-28G-PoE+ provides 24 Gigabit PoE+ ports with 2 10GBASE-T and 2 10GBASE-X SFP+ uplink connectivity
- The (MM4300-28G) -PoE+ is designed to smoothly transfer data with a 128 Gb/s switching capacity and 95.2 Mpps forwarding rate.
- Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection.
Juniper EX4200 Series 48Port POE L3/L4 Managed Switch
Peplink Balance 380 Multi-WAN Router
- Up to 7 advanced load balancing for faster, more responsive networking
- Gateway health check feature monitors connection status and automatically reroutes traffic around trouble spots
- Load Balancing Algorithms for Weighted, Enforced, Persistence, Priority, Overflow, Least Used, and Lowest Latency.
- IPsec/L2TP/PPTP VPN Functionality
- Advanced QoS Functionality
- IPsec only supports connection with Cisco, Juniper, Peplink or Pepwave devices
HP ProCurve 4208vl Switch – 140*1GbE Gigabit Ports – 28*1 GbE SFP – 7 Modulars ( J9033A)
- Layer 2 and Layer 3 lite feature set
- Scalable 10/100/1000 connectivity
- Uni-Directional Link Detection (UDLD)
- Layer 2 switching , Layer 3 routing
- Dynamic ARP protection
- Source-port filtering
- Multiple user authentication methods
Cisco Nexus 5548UP Switch – 32*10GB Ports SFP+ – Managed – With Available Extenders (Nexus 2232TM-E) – (Cisco Nexus 2232PP)
- It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks.
- It integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fibre Channel host bus adapters (HBAs),
- It provides the flexibility to connect directly to servers using 10GBASE-T connections or fiber with Enhanced Small Form-Factor Pluggable (SFP+) transceivers.
- High-performance computing environments with low latency and choice of front-to-back or back-to-front cooling, copper or fiber access ports, and rear-facing data ports
ARUBA 7030 MOBILITY CONTROLLERS-8 Ports Combo (RJ-45&SFP) – 4096 Concurrent (Users/Devices) – Managed-1 U Rack-Mountable
- Branch and Remote Networking Requirements
- Zero-touch provisioning with limited IT assistance
- Secure access to corporate resources across the hybrid WAN
- Wireless and wired access for employees and guests
- WAN optimization and availability
- Policy-based routing and management
- Unified architecture across all locations
NETGEAR ProSAFE JGS524 24-Port Gigabit Ethernet Unmanaged Switch with Auto-Uplink
- 10/100/1000Base-T gigabit technology for high-speed network connectivity
- Rackmountable design for easy installation in a server room or data center
- Plug and play functionality for easy setup and immediate use
- Auto Uplink™️ feature automatically detects and adjusts for straight-through or crossover cables
- Energy-saving auto power-down mode for ports not in use
- Compatible with a wide range of 10-, 100-, and 1000-Mbps devices for versatile network integration
- Compact size for desktop placement or standard 19-inch rack mounting.
Cisco Catalyst 2970G-24T-E – 24 Gigabit Ethernet Ports- 4 * 1 GB SFP – Managed
- The Catalyst 2970 features robust security features, including port security, Access Control Lists (ACLs), and support for 802.1X authentication.
- It supports advanced Quality of Service (QoS) features to prioritize and manage network traffic based on application and user needs
- The switch supports multiple VLANs, enabling network administrators to segment traffic by department, function, or application.
HP A5120 EI Switch Series (JG245A), Layer 3, Managed Gigabit Ethernet switch with 24 10/100/1000 BaseT ports (NEW)
- Provides Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.
- Offers high scalability with two expansion slots that can support two-port 10GbE expansion modules.
- Features Unique Intelligent Resilient Framework (IRF) technology for creating virtual fabrics by virtualizing multiple switches into a single logical device.
- Provides high availability, simplified management, and comprehensive security
Nexus (2232TM-E) Fabric Extender -10GBASE-T, 32x (1/10) GEBase-T + 8x10GE Module (SFP+), 2PS, 1 Fan Module, Cisco Parent Switches Cisco Nexus (5000, 6000, 7000, or n9000) Series
- Reduces data center cabling costs and footprint with optimized inter-rack cabling
- Unified fabric and FCoE at the server access layer reduce capital expenditure and operating expenses
- Virtual Port Channel (vPC) and in-service software upgrades (ISSU) Increase resilience
- Virtual machine aware network services facilitate quick expansion of network capacity
Lenovo RackSwitch G8264CS – 36x10Gb (SFP/SFP+) Ports – 4x40Gb(QSFP+) ports – 12 Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel – Layer 3 – Managed
- The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of up to 1.28 Tbps.
- The G8264CS includes Layer 3 functionality, which provides security and performance benefits, because inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.
- Customers who want to implement a converged infrastructure with FCoE where the G8264CS acts as a Full Fabric FC/FCoE switch for the end-to-end FCoE configurations or as a Fibre Channel Forwarder (FCF) NPV Gateway that breaks out FC traffic for the native Fibre Channel SAN connectivity.
- Advanced features such as QoS, ACLs, IPv6 support, and more
- Reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Easy management with web-based GUI and CLI interfaces
NEC QX-S1024GT-4G 24-Port Gigabit Ethernet Switch with Managed L2 Features, GUI Management, and Fanless Silent Design [Brand New, Packaging not included]
- Ease of use (WEB GUI or CLI)
- Fanless silent design
- Supports Energy Efficient Ethernet (EEE) function, which is an energy-saving function
- Achieves advanced QoS with 8-class priority control queue, bandwidth control, and PQ/WRR scheduling based on CoS/DSCP
- IEEE802.1X authentication/MAC address authentication prohibits communication from unauthorized terminals
- Supports IGMPv1/v2/v3 snooping as a multicast function
- Filtering by access control list (ACL) by MAC address, IP address, etc. is possible
- Supports link aggregation (LACP support), multi-port loop detection, and port mirroring functions
- SNMPv1/v2c/v3, alive monitoring by ping response is possible
- Supports management functions such as telnet/ssh/ftp/tftp/ntp client/syslog/web console
Recently Viewed
Dell PowerEdge R630 ( 8 BAY 2.5 inch SFF )
📌Dell PowerEdge R630 ( 8 BAY 2.5 inch SFF )
▪CPU : DUAL Intel Xeon E5- 2697 V4 (UpTo 3.60GHz)
▪Total cores 36 / Core Threads 72 / 90MB Cashe
▪MEMORY: 16GB DDR4 ECC ( Buss 2400T )
▪STORAGE: 8 x 900GB SAS Enterprise 10K
▪RAID CONTROLLER PERC H730 + Battery
▪NETWORK : 4*1G ETHERNET RJ45🔥🔥
▪1x iDRAC8, Dedicated Gigabit Port
▪DUAL POWER SUPPLY 750 Watt Platinum Hot-Plug
🥇1 YEAR WARRANTY Including ALL PARTS🥇
HP Z6 G4 WORKSTATION
📌HP Z6 G4 WORKSTATION
▪ CPU : Intel® Xeon® W-3223 Processor
Max Turbo Frequency 4.00 GHz
▪ CPU 8 Cores / 16 Cores Threads
▪ RAM : 32G DDR4 ECC
▪ Storage 256GB NVME ( Brand New With 3 Years Warranty )
▪ Graphics Card NVIDIA Quadro P2000
▪Power supply 1000 Watt
▪🥇 1 Year Warranty🥇
H3C 5800 switch
48port GIGa
4Port SFP+10G
JUNIPER – EX3300 48port POE+ 4port SFP+ 10G & 4 Cables Juniper DAC cable 10G
⚫JUNIPER – EX3300 48port POE+ 4port SFP+ 10G
* 48 port 1G POE+
* 4 port SFP+ 10G
* Layer 3 Switch
* With Rackmounts
QTY : 4 Cables
Juniper DAC cable 10G
Dell Precision T7910
– Dual Processor Intel®️ Xeon®️ E5-2698 V3.
– Total 32 Core / 64 Core Thread – Total 80 MB Cache
– Memory 32G DDR4 – ECC
– Storage 128G SSD + 2 x 2T ( Total 4T )
– NVIDIA Quadro K5000 4G DDR5
– Power Supply 1300 WATT GOLD
– 1 Year Warranty
Dell PowerEdge R730 ( 8* 2.5 inch SFF )
- Dual processors / Intel Xeon E5-2697 V3
- Ram 32GB ECC DDR4
- Storage 8*600G SAS 10K
- Raid Controller H730 + Battery
- Dual Power Supply 750 Watt Platinum
- 1 Year Warranty
DELL Workstaion T5810
📌DELL Workstaion T5810
▪ Intel®️ Xeon®️ Processor E5-2698 v4 ( Max Turbo Frequency 3.60 GHz )
20 Cores / 40 Cores Threads
▪ Memory 64G DDR4 ECC
▪ Storage 256 SSD (( M2 ))
▪ Graphics Card : NVIDIA GeForce GTX 1080 Ti 11G Gaming
▪ 1 Year Warranty
HP Z6 G4 WORKSTATION
▪Processor : Intel® Xeon® W-3223 ( 3TH Generation )
▪ Memory : 32G DDR4 ECC ( 2666V )
▪Storage : 1TB SSD NVME ( New in Box )
▪Power Supply 1000 Watt
ARUBA (APIN0225) WIRELESS ACCESS POINT
- Encrypted IPsec VPN tunnels securely connect remote users to corporate network.
- dual radio, 5 GHz 802.11ac and2.4 GHz 802.11n
- 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max)
- Interfaces:(2 x 1000Base-T-RJ-45, 1 x Management-RJ-45, 1 x USB 2.0-Type A)
- Supported power over Ethernet (PoE) voltage: PoE
- Accumulative rate: 1.9 Gbps
HP WorkStation Z4 G4
📌HP Work Station Z4 G4
▪ CPU : Intel® Xeon® Processor W-2255 (Up To 4.70 Ghz)
(( 🔥2ND Generation🔥 ))
▪ Memory 32GB DDR4 – ECC (( 3200A🔥 ))
▪ Storage 512G SSD NVME New in Box (( NVME Brand NEW ))
▪ Graphics Card Nvidia Quadro M2000 4G GDDR5
▪ 1 year warranty
Reviews
There are no reviews yet.